OEM DD dash bezel question

Magnetic Z · 07-22-2015, 02:43 PM

Have not found a straight answer looking through the threads on this. So, the question is: Will the OEM DD dash bezel fit the whole aftermarket HU through the opening OR does it just have a lot of space around the front aftermarket HU faceplate? Looking at this thread from the forum, Pioneer X4600BT installed. Who needs a Metra dash kit?! , looks like the radio was pushed through the opening using rear spacers - not just the faceplate (but still not entirely sure). I'm sure those that have already installed an aftermarket HU using the factory bezel could easily answer this question. thx

kenchan · 07-22-2015, 04:16 PM

i run a 4500BT on mine using factory bezel. i took off the thin felt gasket completely, then used EZ felt (hard felt) to cut-out my own gasket to fill any gaps.

my install looks factory perfect.

Magnetic Z · 07-22-2015, 07:42 PM

Quote:

Originally Posted by kenchan

i run a 4500BT on mine using factory bezel. i took off the thin felt gasket completely, then used EZ felt (hard felt) to cut-out my own gasket to fill any gaps.

my install looks factory perfect.

Cool! Can you tell me if you can push the whole radio you installed through the opening? Am interested in doing this to space it out towards the driver a little - like what the guy in the mentioned link did. Thanks man.

kenchan · 07-23-2015, 12:45 PM

Quote:

Originally Posted by Magnetic Z

Cool! Can you tell me if you can push the whole radio you installed through the opening? Am interested in doing this to space it out towards the driver a little - like what the guy in the mentioned link did. Thanks man.

i didn't try that so i dont know, but i think the bezel is larger than the headunit because i had to add a gasket to close up the gap.

Magnetic Z · 07-23-2015, 03:29 PM

OK, thx. Thought more people may have tried that - maybe not, I guess.

kenchan · 07-23-2015, 04:13 PM

yah i didnt even know people were shifting their hu to the driver side.. i just centered mine and use the steering controls most of the time so i dont usually touch the hu unless im searching for an artist through tags or folders.

07-22-2015, 02:43 PM	#1 (permalink)
Magnetic Z Base Member Join Date: Jun 2015 Location: Virginia Posts: 71 Drives: 2014 370Z midnight Rep Power: 9	OEM DD dash bezel question Have not found a straight answer looking through the threads on this. So, the question is: Will the OEM DD dash bezel fit the whole aftermarket HU through the opening OR does it just have a lot of space around the front aftermarket HU faceplate? Looking at this thread from the forum, Pioneer X4600BT installed. Who needs a Metra dash kit?! , looks like the radio was pushed through the opening using rear spacers - not just the faceplate (but still not entirely sure). I'm sure those that have already installed an aftermarket HU using the factory bezel could easily answer this question. thx Last edited by Magnetic Z; 07-22-2015 at 07:43 PM.

07-22-2015, 04:16 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	i run a 4500BT on mine using factory bezel. i took off the thin felt gasket completely, then used EZ felt (hard felt) to cut-out my own gasket to fill any gaps. my install looks factory perfect. BeemaaZ likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pioneer HU Bezel/Dash kit issue	Magnetic Z	Audio & Video	16	07-25-2015 10:48 PM
[FOR SALE] 2014 Factory radio, dash bezel and speakers	PusZmagnet	Parts for sale (Private Classifieds)	0	12-29-2013 12:06 PM
harness and dash kit question	shayandude	Audio & Video	2	08-09-2012 09:21 PM
Dash Detail Question	rhd	Exterior & Interior	0	07-19-2012 11:28 PM
dash kit question	sonic370	Audio & Video	6	06-23-2010 07:34 PM

07-23-2015, 03:29 PM	#5 (permalink)
Magnetic Z Base Member Join Date: Jun 2015 Location: Virginia Posts: 71 Drives: 2014 370Z midnight Rep Power: 9	OK, thx. Thought more people may have tried that - maybe not, I guess.

07-23-2015, 04:13 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	yah i didnt even know people were shifting their hu to the driver side.. i just centered mine and use the steering controls most of the time so i dont usually touch the hu unless im searching for an artist through tags or folders.