![]() |
I have the same problem... if I just barely tap the window down button, it goes away. (and I mean barely touch it, as in the window will still do
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
|
![]() |
#1 (permalink) |
Base Member
Join Date: Aug 2013
Location: Pittsburgh, PA
Posts: 87
Drives: 09 Nissan 370z
Rep Power: 12 ![]() |
![]()
I have the same problem... if I just barely tap the window down button, it goes away. (and I mean barely touch it, as in the window will still do the up/down when you open/close the door, I do it almost every time I get in the Z.) I've tried adjusting the height of the window (the 2 bolts that secure that window on the regulator) but it doesn't matter.. it's the actual regulator, apparently the cushion at the top wears out. When it warms up I'm going to take it apart and try putting a small piece of foam there and see if it fixes the issue, since the actual regulator isn't broken or worn out I don't think its worth spending the $$ to replace the whole thing..
|
![]() |
![]() |
![]() |
#2 (permalink) | |
A True Z Fanatic
![]() Join Date: Jan 2012
Location: SoCal
Posts: 14,824
Drives: a lot
Rep Power: 17152 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
__________________
Do YOU want to know what/where I got my username from?
( Click to show/hide )
|
|
![]() |
![]() |
![]() |
#3 (permalink) | |
Base Member
Join Date: Oct 2016
Location: Las Vegas, NV
Posts: 49
Drives: 2016 370Z BC A7
Rep Power: 9 ![]() |
![]() Quote:
The dealership was as frustrated as I was with this problem returning so quickly so a new regulator was ordered after several more attempts to stop the noise were unsuccessful. Long story short, the new regulator would have also rattled away & it has to do with the way it has been designed in it's mounting points. It is secured with one mounting screw but the other mounting point is done by using a rivet. This is where the problem arises. SO... with a bit of creative thought, some foam was placed in between that area to prevent that noise created due to the weak contact point using a rivet that can not be properly tightened. This was the explanation I recently got and it seems to be correct. The rattle is totally gone and I don't believe it will ever return now. Such a PITA noise for such a simple cure! Anyways, I hope this information will help others that may run into this issue. Regards Forum Members... ![]() |
|
![]() |
![]() |
![]() |
#4 (permalink) | |
A True Z Fanatic
|
![]() Quote:
__________________
Top Secret | EVO-R | Fujimura Auto | Shine Auto | Seibon | MRWorks | Swift | SPC | SSR | UpRev | Project Kics | NST | Titek | Eibach | Nismo | Whiteline | Quaife | Invidia | Fly1 | CF Element | Carbon Signal
|
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Annoying Rattling | PG370 | Intake/Exhaust | 32 | 06-23-2016 08:56 PM |
Rattling Sound | buenor | Exterior & Interior | 10 | 04-10-2013 01:55 AM |
Gone! Got rid of that annoying rubbing sound | DrEvil | Exterior & Interior | 2 | 02-11-2012 12:04 PM |
high frequency sound/annoying as hell sound | Santent | Nissan 370Z General Discussions | 4 | 12-22-2009 09:59 AM |