Z on the Fenders?

gtabaz · 06-14-2012, 05:45 PM

does anyone know what it would take to remove the little Z from the front fenders? I want to have a completely shaven look to my car, i don't want any badges and im wondering if im going to need to get a whole new fender to accomplish that or if i can simply just remove it. Thanks

MacCool · 06-14-2012, 06:01 PM

It's lighted - comes on with the turn signals. That would seem to imply that it's bolted on and there must be a hole for the wiring. I'm sure you could unbolt it, but you'd have to secure the wiring and weld/grind/paint the holes. That would still probably be cheaper than aftermarket fenders, but maybe you'd find some such fenders that have a more attractive contour.

Glokwork · 06-14-2012, 06:22 PM

It comes out very easily. Push the front side of the light towards the rear of the car, works on both sides. Wiggles out easy once you slide it back. A body shop can definitely fill those in with some work or you can buy aftermarket fenders with it already filled in.

gtabaz · 06-14-2012, 06:46 PM

thanks guys i might just buy the oem fenders and repaint them due to the fact that im not a big fan of the fenders out there the only ones i do seem to like are on the MR Works Z

Alexshen1 · 06-15-2012, 01:02 AM

how you gon tell me you done like this

LakeShow · 06-15-2012, 02:06 AM

^^That is quite nice! Looks almost like a GTR for a second lol.

2theextreme · 06-15-2012, 05:23 AM

Quote:

Originally Posted by Glokwork

It comes out very easily. Push the front side of the light towards the rear of the car, works on both sides. Wiggles out easy once you slide it back. A body shop can definitely fill those in with some work or you can buy aftermarket fenders with it already filled in.

You can? When I had to get my passenger side fender replaced, the OEM fender that was used already had the holes for the Z to be inserted.

If you can point me to these fenders and where to buy them let me know.

Glokwork · 06-15-2012, 05:59 AM

Quote:

Originally Posted by 2theextreme

You can? When I had to get my passenger side fender replaced, the OEM fender that was used already had the holes for the Z to be inserted.

If you can point me to these fenders and where to buy them let me know.

I'm pretty sure you can order either the carbonsignal or aerojacket fenders without the opening.

2theextreme · 06-15-2012, 08:29 AM

Quote:

Originally Posted by Glokwork

I'm pretty sure you can order either the carbonsignal or aerojacket fenders without the opening.

Ah yes, that's probably true.

KaienZ34 · 06-15-2012, 08:57 AM

Quote:

Originally Posted by 2theextreme

You can? When I had to get my passenger side fender replaced, the OEM fender that was used already had the holes for the Z to be inserted.

If you can point me to these fenders and where to buy them let me know.

Yeah i got my carbon signal fenders w/CF vent made from OEM fenders coming. You can order them with or without the Z marker hole, i like the Z so i kept it.

kenchan · 06-15-2012, 09:19 AM

yah those cs fenders do look nice. and with the slots there i am sure it suctions out air from the front wheelwheel for better brake cooling too?

KaienZ34 · 06-15-2012, 09:26 AM

Quote:

Originally Posted by kenchan

yah those cs fenders do look nice. and with the slots there i am sure it suctions out air from the front wheelwheel for better brake cooling too?

I just got them cause i thought they looked hawt...

GaleForce · 06-15-2012, 12:16 PM

Quote:

Originally Posted by kenchan

yah those cs fenders do look nice. and with the slots there i am sure it suctions out air from the front wheelwheel for better brake cooling too?

I doubt it, unless you remove the plastic inner fender liner?

kenchan · 06-15-2012, 01:09 PM

Quote:

Originally Posted by GaleForce

I doubt it, unless you remove the plastic inner fender liner?

yes, the well itself would need to be modded, ofcourse!

GaleForce · 06-15-2012, 01:26 PM

Quote:

Originally Posted by kenchan

yes, the well itself would need to be modded, ofcourse!

Ofcourse

06-14-2012, 05:45 PM	#1 (permalink)
gtabaz Base Member Join Date: Jan 2012 Location: New York Posts: 171 Drives: 2011 370z GunMetal S Rep Power: 13	Z on the Fenders? does anyone know what it would take to remove the little Z from the front fenders? I want to have a completely shaven look to my car, i don't want any badges and im wondering if im going to need to get a whole new fender to accomplish that or if i can simply just remove it. Thanks

06-14-2012, 06:01 PM	#2 (permalink)
MacCool A True Z Fanatic Join Date: Apr 2011 Location: Midwest Posts: 1,349 Drives: 370Z PW 2014 Rep Power: 16	It's lighted - comes on with the turn signals. That would seem to imply that it's bolted on and there must be a hole for the wiring. I'm sure you could unbolt it, but you'd have to secure the wiring and weld/grind/paint the holes. That would still probably be cheaper than aftermarket fenders, but maybe you'd find some such fenders that have a more attractive contour. Last edited by MacCool; 06-14-2012 at 06:03 PM.

06-14-2012, 06:22 PM	#3 (permalink)
Glokwork A True Z Fanatic Join Date: Jun 2011 Location: Roanoke, VA Posts: 2,657 Drives: 11 370Z MB 6MT Rep Power: 21	It comes out very easily. Push the front side of the light towards the rear of the car, works on both sides. Wiggles out easy once you slide it back. A body shop can definitely fill those in with some work or you can buy aftermarket fenders with it already filled in. __________________ Precision Turbo Tial Turbosmart Fast Intentions Seibon Prosport Advan AD08R HKS Hipermax IV Nismo Evo-R PW:JDM UpRev Pioneer Escort Volk CE28N Top Mount Single Turbo 551whp/482wtq@10psi

06-15-2012, 02:06 AM	#6 (permalink)
LakeShow A True Z Fanatic Join Date: Dec 2010 Location: L.I., NY Posts: 5,307 Drives: Everything Rep Power: 25	^^That is quite nice! Looks almost like a GTR for a second lol. __________________ \|2013 Audi S4\|Ibis White/Black\|S-Tronic P+\| \|2013 370z\|PearlWhite/Persimmon\|Touring/Sport/Nav\|F.I. CBE 18" CF\| \|Sold\|2011 370z\|Gun Metallic\|Touring/Sport/Nav\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Fenders	Ilovejdm07	Parts for sale (Private Classifieds)	0	01-06-2012 06:47 AM
PW Fenders	W.O.W. 370Z	Wanted	0	12-27-2011 12:42 PM
Considering getting the UAM Fenders	xdeslitx	40th Anniversary 370Z	18	03-23-2011 11:52 PM
WTB Fenders.	Jamaica	Wanted	2	12-02-2010 05:25 PM

06-14-2012, 06:46 PM	#4 (permalink)
gtabaz Base Member Join Date: Jan 2012 Location: New York Posts: 171 Drives: 2011 370z GunMetal S Rep Power: 13	thanks guys i might just buy the oem fenders and repaint them due to the fact that im not a big fan of the fenders out there the only ones i do seem to like are on the MR Works Z

06-15-2012, 01:02 AM	#5 (permalink)
Alexshen1 Base Member Join Date: Apr 2010 Location: Nor Cal Posts: 154 Drives: 09 370z Rep Power: 15	how you gon tell me you done like this

06-15-2012, 09:19 AM	#11 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	yah those cs fenders do look nice. and with the slots there i am sure it suctions out air from the front wheelwheel for better brake cooling too?