Originally Posted by daisuke149 (Post 2789535)

if you stick with 10 and 12 you can use my offsets and know how it will look / fit.

if you want to reduce poke just add 5mm to them. so 32 and 25.

now keep this in mind that the tire you use matters also. I used Conti DW's. they are a bit rounded. Michelins are known to be wider than other tires.

if your worried, go higher offset as you can always add a spacer if you need to.

Originally Posted by daisuke149 (Post 2789555)

in those pics that was after i just slapped em on. nothing adjusted yet.

Originally Posted by daisuke149 (Post 2789555)

in those pics that was after i just slapped em on. nothing adjusted yet.

Originally Posted by daisuke149 (Post 2789626)

it didnt poke too much. nothing rubbed or anything. it was like a perfect fit. the compression made it slight right under the fenders.

i wanted to close the wheel gap a bit so i lowered it.

as you can see there was really no camber added.

https://scontent-a-sjc.xx.fbcdn.net/...02761144_o.jpg

https://scontent-b-sjc.xx.fbcdn.net/...19670787_o.jpg

https://scontent-a-sjc.xx.fbcdn.net/...58538396_o.jpg

adding +5 to each of my offsets is def a safe bet

Originally Posted by Waizzz (Post 2789682)

If you want these wheels we will need to help you find the correct disc size, just choosing an offset and width by themselves will not be the complete answer with any of the VS line

Originally Posted by GURJEEZY (Post 2789686)

I believe I need the R Disk... Are you a Vendor?

Originally Posted by daisuke149 (Post 2789700)

yeah def talk to Mark at ravspec. if its wheel related, he can get it for you.

Originally Posted by GURJEEZY (Post 2789686)

I believe I need the R Disk... Are you a Vendor?

Originally Posted by Waizzz (Post 2789691)

No, I'm not a vendor but Mark at RavSpec will be able to take care of you, according to him A-disc is more than fine:

http://www.the370z.com/tires-wheels/...any-specs.html

Send him a PM to be sure and he can get you a price and availability details. Work wheels can sometimes be a little difficult to find but Mark may already have a set that you need in stock.

Originally Posted by Radride (Post 2791197)

I've got 20x9.5 T disk +20 offsets on the front and 20x12 +26 A disk on the rear in step lip VS XX coming. Also, the OP should know that you will most likely have to run a spacer on the front if you order a 19" wheel or 20" wheel in a non step lip design VS XX. Order wheels with that in mind.

R.K.