stock Potenzas which way do arrows point??

TreeSemdyZee · 07-06-2012, 11:53 AM

Quote:

Originally Posted by mattleegee

yep got that, and inside says "inside" the big shoulders are designed to be on the outside that is why it is labeled that way also
But if you have it mounted on LH then arrows are one way and when you flip it around to go on RH then arrows are now the other way just trying to figure out which way the arrows came from the factory to match tread wear

And Triples picture shows arrows both ways so it might be something i will never figure out

The arrows only go "one" direction. If the arrows point to the front on the right and you flip the wheel and put in on the left side, the arrows then point to the back. Make sense?

Boost_lee · 07-06-2012, 12:22 PM

The pattern will not "appear" to match since the Potenzas are not directional. I wouldnt worry about the pattern as long as they are mounted on the correct side

mattleegee · 07-06-2012, 05:00 PM

Thank you guys
Yes they are mounted all the same

Now i understand whats going on, the arrows pointing different ways confused me, didnt know if i should have one side pointing one way and the other side pointing the other way

I will just go with how they are since now i got about 50miles on them, i was hoping to get all of them right or all of them wrong how they where originally on the 370z they came off of for even wear

Thanks again!

Quote:

Originally Posted by didymus

have you compared all four wheels/tires? are they all mounted the same?

Quote:

Originally Posted by kenchan

yah, i wouldn't worry about the tread pattern. just go with the inside/outside.

Quote:

Originally Posted by TreeSemdyZee

The arrows only go "one" direction. If the arrows point to the front on the right and you flip the wheel and put in on the left side, the arrows then point to the back. Make sense?

Quote:

Originally Posted by Boost_lee

The pattern will not "appear" to match since the Potenzas are not directional. I wouldnt worry about the pattern as long as they are mounted on the correct side

07-06-2012, 12:22 PM	#2 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 30	The pattern will not "appear" to match since the Potenzas are not directional. I wouldnt worry about the pattern as long as they are mounted on the correct side __________________ My TT Z Last edited by Boost_lee; 07-06-2012 at 12:24 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] (3) 275/35/19 tires - Bridgestone Potenzas and Falken	driver1712	Parts for sale (Private Classifieds)	10	07-03-2012 03:40 PM
6-point gt-spec brace with stock suspension - clearance?	Armonster	Brakes & Suspension	3	08-05-2011 08:50 PM
[FOR SALE] OEM Bridgstone Potenzas	PaulZ370	Parts for sale (Private Classifieds)	6	07-27-2011 10:57 PM
FS: (2) Bridgestone Potenzas RE050A 225/40/19	old_account	Parts for sale (Private Classifieds)	0	10-14-2010 11:59 PM