Remove SSR Center Cap

370Z JT · 05-06-2012, 08:43 PM

How do you install the caps? Slide them in at an angle?

amusez34 · 05-06-2012, 09:15 PM

i tried the hammer from behind by nothing works

i got it like that so I donnt know how to get it in or out.

azn370z · 05-06-2012, 09:19 PM

You have to hit it hard enough. It's going to take several hits. It's only held in with friction. You might try hitting it at 12, 3, 6, 12 again, in a circular motion.

azn370z · 05-06-2012, 09:22 PM

Quote:

Originally Posted by 370Z JT

How do you install the caps? Slide them in at an angle?

Put some saliva around the rubber seal and angle it in and press it in with your fingers.

amusez34 · 05-06-2012, 09:36 PM

ok i just managed to get it out. thanks people

Quote:

Originally Posted by azn370z

Put some saliva around the rubber seal and angle it in and press it in with your fingers.

gy954 · 05-07-2012, 11:10 AM

To replace, spray with soapy water, then tap in with a rubber mallet.

05-06-2012, 08:43 PM	#1 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 380	How do you install the caps? Slide them in at an angle? __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

05-06-2012, 09:19 PM	#3 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 491	You have to hit it hard enough. It's going to take several hits. It's only held in with friction. You might try hitting it at 12, 3, 6, 12 again, in a circular motion. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For Sale: EVO-R 3-piece front spoiler, CF center, PW sides + extra center	Jessobear	Mid-Atlantic Region	2	09-09-2011 01:30 PM
How would i remove this?	oleg	Wheels & Tires	12	08-10-2011 04:23 PM
How to remove center gauge cover?	docaam	Exterior & Interior	6	03-16-2011 01:05 PM
How do I remove the ECU?	zeecarr	DIY Section (Do-It-Yourself)	4	04-09-2010 10:54 PM

05-06-2012, 09:15 PM	#2 (permalink)
amusez34 Track Member Join Date: Nov 2011 Location: SoCal Posts: 902 Drives: 370z Rep Power: 30	i tried the hammer from behind by nothing works i got it like that so I donnt know how to get it in or out.

05-07-2012, 11:10 AM	#6 (permalink)
gy954 Base Member Join Date: Mar 2012 Location: Sonoma County, CA Posts: 163 Drives: 2011 370Z Rep Power: 183	To replace, spray with soapy water, then tap in with a rubber mallet.