Spacers/Springs question

Z_bro · 06-04-2011, 03:00 PM

I want an agressive look with a slight poke. What spacers would I need if I go with a 20x 8.5 with a 40 offset on all four corners?? I don't track so im not concerned with the pros and cons with that. What spacers would I need in the front/back? I was thinking 20 fr and 25 rr. or would I need a 10 or 15 in the front?

Also if someone could tell me some springs that I could buy that would give me a mild drop I would appreciate it. I just cancelled my order on the Swift R's because they are taking too long and also I think the drop is too low for me....

kenchan · 06-04-2011, 06:05 PM

First get wider wheels for the back at least. 8.5 is like a fwd car width. Lol

delusional · 06-04-2011, 07:04 PM

Quote:

Originally Posted by kenchan

First get wider wheels for the back at least. 8.5 is like a fwd car width. Lol

8 in width is too small and 40 offset is high to be flush or poke. those specs are for fwd car definitely. get wider rims and lower offsets then get some spacers.

djpathfinder · 06-04-2011, 07:22 PM

Get wheels with proper widths and offsets and NO spacers, is the proper way to do it.

Z_bro · 06-05-2011, 09:01 AM

so what offsets would give me a poke without spacers? The lower the offset number the more they poke? So a 35 offset pokes more than a 40? I am sure I am not sounding too bright.... I do appreciate the help.

Red__Zed · 06-05-2011, 09:10 AM

It depends on the widths you want to run.

If you want to run a square setup, I would run 9's or 9.5's all the way around. I would purchase them with +35 offsets, and run a 20mm spacer in the rear. This would give you an effective offset of +15 in the back.

Now, if you actually want poke (which I probably wouldn't recommend), you will want to go more aggressive. On a 9.5, I think around +15 is where you start to poke up front. I think you'd need to go negative to poke in the rear with a 9.5.

Z_bro · 06-05-2011, 09:38 AM

Red_Zed I told Kami speed to cancel my order on the swift r springs he told me it will be another two to three weeks ( its already been three weeks). I also looked at your car and Jons and I think its a bit too low for me. What springs can I buy that will give me a bout a 3/4 drop?

OMGWTFBBQ · 06-05-2011, 10:57 AM

If you want a slight poke, I'm running 18x10 +15 all around with a 30mm spacer in the rear. Do the math and that leaves me with a 10" width and -15 offset in the rear effectively. That should be good enough for you.

Red__Zed · 06-05-2011, 11:01 AM

Quote:

Originally Posted by Z_bro

Red_Zed I told Kami speed to cancel my order on the swift r springs he told me it will be another two to three weeks ( its already been three weeks). I also looked at your car and Jons and I think its a bit too low for me. What springs can I buy that will give me a bout a 3/4 drop?

The Eibachs are a bit more mild of a drop. Worth looking into those if you don't want to drop as much.

Z_bro · 06-06-2011, 06:45 AM

OMG do you have pics of your car? I went to your page and didn't see an album... Red_Zed thanks I got my spacers saturday and I will see if he has the eibachs in stock.

06-04-2011, 03:00 PM	#1 (permalink)
Z_bro Track Member Join Date: May 2011 Location: The Bay (Concord) Posts: 566 Drives: Custom Blue Z Rep Power: 15	Spacers/Springs question I want an agressive look with a slight poke. What spacers would I need if I go with a 20x 8.5 with a 40 offset on all four corners?? I don't track so im not concerned with the pros and cons with that. What spacers would I need in the front/back? I was thinking 20 fr and 25 rr. or would I need a 10 or 15 in the front? Also if someone could tell me some springs that I could buy that would give me a mild drop I would appreciate it. I just cancelled my order on the Swift R's because they are taking too long and also I think the drop is too low for me.... __________________ I collect the souls of fallen Z's.... A.K.A I want your part out! Last edited by Z_bro; 06-04-2011 at 03:02 PM.

06-04-2011, 07:22 PM	#4 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	Get wheels with proper widths and offsets and NO spacers, is the proper way to do it. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

06-05-2011, 09:01 AM	#5 (permalink)
Z_bro Track Member Join Date: May 2011 Location: The Bay (Concord) Posts: 566 Drives: Custom Blue Z Rep Power: 15	so what offsets would give me a poke without spacers? The lower the offset number the more they poke? So a 35 offset pokes more than a 40? I am sure I am not sounding too bright.... I do appreciate the help. __________________ I collect the souls of fallen Z's.... A.K.A I want your part out!

06-05-2011, 09:38 AM	#7 (permalink)
Z_bro Track Member Join Date: May 2011 Location: The Bay (Concord) Posts: 566 Drives: Custom Blue Z Rep Power: 15	Red_Zed I told Kami speed to cancel my order on the swift r springs he told me it will be another two to three weeks ( its already been three weeks). I also looked at your car and Jons and I think its a bit too low for me. What springs can I buy that will give me a bout a 3/4 drop? __________________ I collect the souls of fallen Z's.... A.K.A I want your part out! Last edited by Z_bro; 06-05-2011 at 09:44 AM.

06-06-2011, 06:45 AM	#10 (permalink)
Z_bro Track Member Join Date: May 2011 Location: The Bay (Concord) Posts: 566 Drives: Custom Blue Z Rep Power: 15	OMG do you have pics of your car? I went to your page and didn't see an album... Red_Zed thanks I got my spacers saturday and I will see if he has the eibachs in stock. __________________ I collect the souls of fallen Z's.... A.K.A I want your part out!

06-04-2011, 06:05 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	First get wider wheels for the back at least. 8.5 is like a fwd car width. Lol

06-05-2011, 09:10 AM	#6 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 119	It depends on the widths you want to run. If you want to run a square setup, I would run 9's or 9.5's all the way around. I would purchase them with +35 offsets, and run a 20mm spacer in the rear. This would give you an effective offset of +15 in the back. Now, if you actually want poke (which I probably wouldn't recommend), you will want to go more aggressive. On a 9.5, I think around +15 is where you start to poke up front. I think you'd need to go negative to poke in the rear with a 9.5.

06-05-2011, 10:57 AM	#8 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	If you want a slight poke, I'm running 18x10 +15 all around with a 30mm spacer in the rear. Do the math and that leaves me with a 10" width and -15 offset in the rear effectively. That should be good enough for you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift springs and spacers	TraumaRN	Brakes & Suspension	70	12-05-2017 07:10 AM
Is it okay to put 20mm f&r spacers with H&R springs?	IS2000	Wheels & Tires	1	01-18-2011 02:52 PM
10 hours for springs and spacers??	nurseryboy	Brakes & Suspension	41	12-24-2010 04:52 PM
H&r springs & 20/25 spacers	fairladyZ34	Brakes & Suspension	14	10-07-2010 04:13 PM
My PG roadster with springs and spacers	craniac24	Nissan 370Z Photos / Spyshots / Video / Media Gallery	11	04-21-2010 07:56 PM