Wheel Offset Discussion Thread... How far can we go?

djpathfinder · 03-17-2011, 11:05 AM

Looks good, what tire sizes are you running?

Waqar · 03-19-2011, 04:18 AM

Quote:

Originally Posted by djpathfinder

looks good, what tire sizes are you running?

275/35/18
295/35/18

ND370z · 03-22-2011, 02:42 PM

how about a deep dish concave step lip? anyone have that ?

MUST · 03-23-2011, 04:12 AM

Quote:

Originally Posted by ND370z

how about a deep dish concave step lip? anyone have that ?

been looking for the same thing, this is what i found so far...

Ron · 03-23-2011, 11:36 PM

Dropped on swift springs, car is daily driven. What can you tell me about this:

front: 19x9.5 +22 on 245/40s
rear: 19x10.5 +12 on 285/35s

Edit: After thinking about it, I figured that the setup I want would be the equivalent of adding 18mm front/11mm rear spacers to the stock nismo wheels, so I guess I will be ok up front since there are people here running 20mm spacers on the front with nismo wheels and tires....for the rears I guess I could add 5mm+2.5mm spacers to bring the offset down to +4.5 (same thing as adding 18.5mm spacer to rear nismo wheels, again, I've seen people here running 20mm spacers back there.)

what do you think? do you think camber will be too bad for a daily driver? Do I have all my calcs wrong? lol

-370Z- · 04-04-2011, 08:22 AM

Anyone have any idea how much room we got up front as far as suspension clearance goes?

theART · 04-14-2011, 04:48 PM

Any idea if 19x9.5+17 on the 245/40/19 Fronts with stock springs IS TOO AGGRESSIVE and going to eat the fender?

ArtK · 05-20-2011, 04:12 PM

Couple of quick questions, (I'm sure my answers are in this post somewhere, so let me apologize upfront if I'm being redundant!)
1. If I am getting a 20x11 wheel and want 315/25/20 tires and want them to be able to tuck what range offset should I get?

2. Same question for the front with a 20x9.5 wheel and either 255 or 265/30/20 tire?

Thanks for the info, Trial and error is too expensive!!

ArtK · 05-20-2011, 04:14 PM

Couple of quick questions, (I'm sure my answers are in this post somewhere, so let me apologize upfront if I'm being redundant!)
1. If I am getting a 20x11 wheel and want 315/25/20 tires and want them to be able to tuck what range offset should I get?

2. Same question for the front with a 20x9.5 wheel and either 255 or 265/30/20 tire?

Thanks for the info, Trial and error is too expensive!!

ArtK · 05-20-2011, 04:16 PM

Sorry for the double post. Damn Droid, can't wait for the next iPhone!!

ArtK · 05-21-2011, 08:39 AM

Has anyone put a 265/30/20 tire on a 9.5 wheel using an offset in the +12 to +18 range?
I am wondering if it will rub on anything or if I should do a 255/30/20...I don't want to go to narrow in the front because I am doing a 315 rear tire on an 11mm wheel.
Any thoughts.............

One_Quick_Z · 06-16-2011, 04:18 AM

Thread revive!

How about +15 front and rear anyone have this yet?

DAN

daisuke149 · 06-17-2011, 09:15 AM

Quote:

Originally Posted by One_Quick_Z

Thread revive!

How about +15 front and rear anyone have this yet?

DAN

you could run a +15 .. depends on what width you want.

a 10" wide +15 would required a serious drop and/or camber for the front and the rear would need a spacer if it was 10" + 15. but if it was a 8" wheel, it would fit fine up front and require a massssive spacer in the rear.

OMGWTFBBQ · 06-17-2011, 12:37 PM

Quote:

Originally Posted by One_Quick_Z

Thread revive!

How about +15 front and rear anyone have this yet?

DAN

I'm running 18x10 +15 255/40/18 all around with a 30mm spacer in the rear. -2.3 front camber and -2.0 rear camber. Lowered pretty aggressively on KW V3's. Front fenders are slightly pulled, fender liners trimmed, bumper tab relocated. No issues here.

One_Quick_Z · 06-22-2011, 10:58 AM

I am already on Stance Coils with a mild drop, I was really hoping not to get spacers Im just not a fan wheel specs are 19/9.5/10.5 +15 front and rear......Dont really care if it has a little tuck or even just a little poke.....I plan on 255 30's up front and 305 30's in the rear...

DAN

03-17-2011, 11:05 AM	#106 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	Looks good, what tire sizes are you running? __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

03-23-2011, 11:36 PM	#110 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	Dropped on swift springs, car is daily driven. What can you tell me about this: front: 19x9.5 +22 on 245/40s rear: 19x10.5 +12 on 285/35s Edit: After thinking about it, I figured that the setup I want would be the equivalent of adding 18mm front/11mm rear spacers to the stock nismo wheels, so I guess I will be ok up front since there are people here running 20mm spacers on the front with nismo wheels and tires....for the rears I guess I could add 5mm+2.5mm spacers to bring the offset down to +4.5 (same thing as adding 18.5mm spacer to rear nismo wheels, again, I've seen people here running 20mm spacers back there.) what do you think? do you think camber will be too bad for a daily driver? Do I have all my calcs wrong? lol Last edited by Ron; 03-24-2011 at 12:51 AM.

06-16-2011, 04:18 AM	#117 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 218	Thread revive! How about +15 front and rear anyone have this yet? DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

06-22-2011, 10:58 AM	#120 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 218	I am already on Stance Coils with a mild drop, I was really hoping not to get spacers Im just not a fan wheel specs are 19/9.5/10.5 +15 front and rear......Dont really care if it has a little tuck or even just a little poke.....I plan on 255 30's up front and 305 30's in the rear... DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z offset	azn370z	Wheels & Tires	28	10-06-2010 09:53 PM
Need Help Indentifing a wheel ..	Q_USAF	Wheels & Tires	2	04-12-2009 11:06 PM
RAYS wheel nut.?	Chan Chee Hoe	Wheels & Tires	4	03-15-2009 09:02 PM
Peak Power discussion...	klubbheads	Engine & Drivetrain	4	02-19-2009 08:52 PM
Discussion Thread: 370z pictures from Europe 11.05.08	AK370Z	Nissan 370Z General Discussions	17	11-09-2008 04:04 PM

03-22-2011, 02:42 PM	#108 (permalink)
ND370z Base Member Join Date: Feb 2011 Location: SoCal Posts: 115 Drives: 370z Rep Power: 14	how about a deep dish concave step lip? anyone have that ?

04-04-2011, 08:22 AM	#111 (permalink)
-370Z- Base Member Join Date: Jun 2009 Location: Miami Posts: 8 Drives: 05 Honda S2000 Rep Power: 15	Anyone have any idea how much room we got up front as far as suspension clearance goes?

04-14-2011, 04:48 PM	#112 (permalink)
theART Base Member Join Date: Feb 2009 Location: BC Posts: 163 Drives: To Drive Rep Power: 7822	Any idea if 19x9.5+17 on the 245/40/19 Fronts with stock springs IS TOO AGGRESSIVE and going to eat the fender?

05-20-2011, 04:12 PM	#113 (permalink)
ArtK Base Member Join Date: May 2011 Location: Tampa Posts: 36 Drives: 2010 370Z Black 7AT Rep Power: 13	Couple of quick questions, (I'm sure my answers are in this post somewhere, so let me apologize upfront if I'm being redundant!) 1. If I am getting a 20x11 wheel and want 315/25/20 tires and want them to be able to tuck what range offset should I get? 2. Same question for the front with a 20x9.5 wheel and either 255 or 265/30/20 tire? Thanks for the info, Trial and error is too expensive!!

05-20-2011, 04:14 PM	#114 (permalink)
ArtK Base Member Join Date: May 2011 Location: Tampa Posts: 36 Drives: 2010 370Z Black 7AT Rep Power: 13	Couple of quick questions, (I'm sure my answers are in this post somewhere, so let me apologize upfront if I'm being redundant!) 1. If I am getting a 20x11 wheel and want 315/25/20 tires and want them to be able to tuck what range offset should I get? 2. Same question for the front with a 20x9.5 wheel and either 255 or 265/30/20 tire? Thanks for the info, Trial and error is too expensive!!

05-20-2011, 04:16 PM	#115 (permalink)
ArtK Base Member Join Date: May 2011 Location: Tampa Posts: 36 Drives: 2010 370Z Black 7AT Rep Power: 13	Sorry for the double post. Damn Droid, can't wait for the next iPhone!!

05-21-2011, 08:39 AM	#116 (permalink)
ArtK Base Member Join Date: May 2011 Location: Tampa Posts: 36 Drives: 2010 370Z Black 7AT Rep Power: 13	Has anyone put a 265/30/20 tire on a 9.5 wheel using an offset in the +12 to +18 range? I am wondering if it will rub on anything or if I should do a 255/30/20...I don't want to go to narrow in the front because I am doing a 315 rear tire on an 11mm wheel. Any thoughts.............