I'm planning to run 20x10.5 +22 front and 20x12 +12 TE-37 Ultra
anyone have this setup?

From wat I've read the plus 12 will be really close if not hitting the fender without pretty excessive camber.

Sorry, i typed that wrong. Rays only makes the 20x12 in +20, which is still cool

I was running 17x9.5 +12 and 18x10.5 +18 on my S14; i'm
used to making stuff fit (and that wasn't even uber aggressive, even for metal fenders)

I've dug around enough to know the rears will be fine with stretch, camber, roll, and the Z has enormous space in the rear. I'm not planning on tucking the entire tire or anything.

I'm mainly just checking if the 10.5 +22 will have any rubbing issues on the INSIDE.

For my S14, i kept rubbing on the wiring harness on the front, and had to ziptie the damn thing near the top of the front frame inside the fender.

Wish they made 20x9.5 +12 with face 4

With camber and stretch ya u should be good in the rear. Plus they are already rolled ;). And I'm not 100% on the inside of the front but I've heard of close to that fitting with a roll. Front aren't rolled. Could always run it through an offset calc. And see what happens

You can make them fit. At the most you may need some camber, a tire stretch, and possibly the fenders rolled. I'm personally running 10.5s but with a big negative offset (18s with a slammed car) They took some work, but they fit.

Just posting my current setup

Front 19x9 +8
Rear 19x11 - 6
Coilover suspension, Camber arms, Toe arms.

http://i1240.photobucket.com/albums/...psibizyacr.jpg

http://i1240.photobucket.com/albums/...pscbc2ba65.jpg

Want some opinions before I order a new set, I want to run 285 35 19 front and 325 30 19 rear, I've seen the nismo wheels hold these sizes nicely but I won't be running any spacers, lowered or more camber. Should the nismo offsets be the best option or is anyone running something similar but better?

I need help with wheels. There are these varstoen es2 wheels i want, the sizes are:
front 19x9.5 +22
rear 19x10.5 +22

There are all kind of sizes for offset but i was wondering if this one will fit my base 370 and will it look good? I am lowered an inch on ark gtf springs. What tires do I choose? I'm a beginner to car modding sorry. Ordering from concept z performance website.

thats the size that like . . .every run of the mill z owner runs.

Are you replying to me or the one of the guys above? Also would .12 offset front and back work on 9.5 and 10.5

For +12 you may need some camber depending on tire size imo

U should be ok with +12 considering u can run 19x11 +5 no rub. I was going to go with es2 but they only go up to 10.5 and y oh y run 10.5 when u could run 12 ;)

Our 370z on Work CR 2P
19x9.5 +12 - 245/35
19x11 -5 - 275/35
Approx. -3* camber all around

Here's some photos for you guys to reference if anyone is questioning their future setup with similar specs.

http://www.royalspeedshop.com/v/vspf...s/IMG_0769.jpg
http://www.royalspeedshop.com/v/vspf...s/IMG_0771.jpg
http://www.royalspeedshop.com/v/vspf...s/IMG_0781.jpg
http://www.royalspeedshop.com/v/vspf...s/IMG_0789.jpg

just bought 19.5 +25 and they dont clear my sport brakes

!@#$%^&*

been mentioned over and over

offset doesn't dictate clearance
spoke design does

most reputable brands will tell you if a particular size will clear

what wheel did you buy?