I've read this whole thread and still haven't found the answer to my question. I used the tire and offset calculators and I think I'll be o.k. But I'm still a little unsure.
19x9.5 +35 offset 265/40
19x10.5 +35 offset 295/35
I also have the option of plus +15 offset, I'm on stock suspension and I really don't want to get into any major suspension mods.

Any help would be greatly appreciated, and thanks in advance

20x10 front +27 with 275/30/20 continental DW
20x12 rear + 20 with 325/25/20 continental DW

this fit at oem height and camber (eventually lowered the car .5")

if thats meaty enough for you go for it.

since you wanna drop and then adjust camber maybe later on go with a +30 and +23 if you can.

Honestly I dont think those will work regardless.... The faces are flat and are not going to clear the Akebono's.. Do yourself a favor, sell those to the VIP crowd and buy yourself some new wheels with specs for a 370z... Hit up Mark @ Ravspec for advice and prices.

Would this be too aggressive? I'm currently on -2.5 camber in front and -3.3 camber in the rear. I'm planning to get this set up...
19x10 +0 with 245/35
19x11 +0 with 275/35
Opinion?? If you have pictures, please post it up. I wanna see how it sit

This should help a little
Scroll up to see photos

willtheyfit.com

This is a great little tool to help figure things out.

OK so I'm wanting a set of rays gram lights 57fxx.
The measurements come in at

19x9.5+15
19x11+18

So to speak the front should be 38mm further out and 26mm more inner clearance. And the rear should be 26mm further out and 1 mm less inner clearance?

I'm going to measure tomorrow, anyone run these wheels?

Just a quick question, looking at trading wheels with a friend,

18X10 +12 square set up

id like to run 275/40-18

still stock height and I don't think im going to drop the car yet.
is this too aggressive? Thanks in advance for the input.

Fronts will stick out way too much ... I just had the 19x9.5 +25 fitted in my car and they were too aggressive, 35 would work much better for the fronts. I can't speak for the rears, but I think they would also stick out too much by about 5mm

Here's 19x11 +18 rear. No tire, but the suspension is compressed.

http://i.imgur.com/BVVWMjZ.jpg

so the lower the offset number the more the wheel will stick out?

There are these varrstoen es552 wheels that I'd like to get.

website I'm looking at has them at
F 19x9.5 +22
R 19x10.5 +22


Will that be fine? excuse the ignorance.

I think you'll need 10mm spacers in the back

The rears fit perfectly with no spacers and doesnt stick out.

I bought some 15mm spacers and placed them on the front to clear BBK but stick out way to damn much. I guess its time to either re-barrel the fronts or sell them and get some other options.

Ok so I'm getting ready to order the new work emotion c2p wheels and I need some input. First my 370z has bbk's, coilovers and camber arms front and rear and a lot of hp. So what I'm wanting is maximum lip on the rear with widest tire as possible. And decent lip on front. I'm OK with some camber just nothing crazy. I am also willing to stretch the tires some but nothing extreme on this either. The wheels will be 19's also. So what's the best offset to achieve what I'm looking for?

Sent from my SAMSUNG-SGH-I527 using Xparent BlueTapatalk 2

I'm running 19x9.5, +28 in the front with 275/30-19 PSS. Was running 19x12, +25 rear with 325/30-19 PSS's. Perfect fit. Change the rear tires to 345/30-19 PSS's. Same rims. Now they poke some.