Ichiba V2 20mm spacers for front. (help)

JC671 · 03-17-2011, 02:01 AM

Sup fellas, I ran into a problem last night while installing my springs and spacers. I read a thread that the above spacer will fit 20mm all around with the bolts mounted on them already. The backs when on fine but when I tried to do the fronts. There was one extra metal stem/screw/lug that stuck out from the rotor. This was preventing me from being able to put the spacer on. Did I buy the wrong set of spacers for the front? Please help. I want to put 20mm up front also without having to change the stock lugs or extend them (hence the reason why I got the spacers with the bolts already attached). Please help me out. Thank you.

iceman21_23 · 03-17-2011, 03:38 AM

that little bold is just to help people not put the rear wheels on the front all you need to do is take it off.

Boost_lee · 03-17-2011, 03:43 AM

Yup, just remove that bolt you don't need it.

JC671 · 03-17-2011, 07:02 AM

Let me get this straight so that size 10 or 12mm bolt will just come off with the entire metal stem? If so I'll give it a try.. Thanks fellas +rep for both of ya!

03-17-2011, 02:01 AM	#1 (permalink)
JC671 Enthusiast Member Join Date: Feb 2011 Location: Guam Posts: 451 Drives: Toretto around Rep Power: 14	Ichiba V2 20mm spacers for front. (help) Sup fellas, I ran into a problem last night while installing my springs and spacers. I read a thread that the above spacer will fit 20mm all around with the bolts mounted on them already. The backs when on fine but when I tried to do the fronts. There was one extra metal stem/screw/lug that stuck out from the rotor. This was preventing me from being able to put the spacer on. Did I buy the wrong set of spacers for the front? Please help. I want to put 20mm up front also without having to change the stock lugs or extend them (hence the reason why I got the spacers with the bolts already attached). Please help me out. Thank you.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS 20mm & 25mm Ichiba V2 Spacers	fairladyZ34	Parts for sale (Private Classifieds)	9	12-01-2010 09:57 PM
FS: Ichiba V2 20mm spacers	kenchan	Parts for sale (Private Classifieds)	19	10-26-2010 05:00 PM
20mm Ichiba V1 spacers only (2)	Danny3.7	Parts for sale (Private Classifieds)	0	10-10-2010 10:57 PM
Ichiba spacers 15mm / 20mm	Mike	Parts for sale (Private Classifieds)	5	03-14-2010 08:42 PM
FS: 20mm Ichiba Spacers	phelan	Parts for sale (Private Classifieds)	11	11-28-2009 04:15 PM

03-17-2011, 03:38 AM	#2 (permalink)
iceman21_23 Track Member Join Date: Jan 2009 Location: league city, tx Posts: 757 Drives: 09' Solid Red 370z Rep Power: 17	that little bold is just to help people not put the rear wheels on the front all you need to do is take it off.

03-17-2011, 03:43 AM	#3 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	Yup, just remove that bolt you don't need it.

03-17-2011, 07:02 AM	#4 (permalink)
JC671 Enthusiast Member Join Date: Feb 2011 Location: Guam Posts: 451 Drives: Toretto around Rep Power: 14	Let me get this straight so that size 10 or 12mm bolt will just come off with the entire metal stem? If so I'll give it a try.. Thanks fellas +rep for both of ya!