What's with this camber?

spearfish25 · 03-13-2011, 04:19 PM

I just put my new RE-11s on the car and the wide tires really accentuate the stock rear camber. My OEM RE050As wore out pretty evenly and looked similar. However, what do you guys think of the stock rear camber? Unless you're cornering, it looks like 10-150% of the tread isn't contacting the ground. You can see the front contact patch is much more even with the stock camber up front.

Red__Zed · 03-13-2011, 06:05 PM

Can't see much in the way of camber in those pics, so it's hard to say.

Did you check your tire pressures?

Baer383 · 03-13-2011, 06:10 PM

your back wheels will have .5-.9 more neg. camber,judging from the dirt pattern on the rear tires I wouldn't worry about it.

spearfish25 · 03-13-2011, 06:25 PM

Yeah, dirt pattern is what I was using as implied camber indicator. Tire pressures are 35psi currently.

Zerafian · 03-13-2011, 07:26 PM

camber looks completely acceptable. If the 370z stock camber is anything like the 350 your gonna be around -1.1 to -1.6

kenchan · 03-13-2011, 07:55 PM

This is normal. This is why tire manufacturers started making more asymetrical tires with reinforced inner tread belts to sustain proper posture while going straight. Think of these tires having two work modes..one for straight, one for cornering. (+wet/dry)

NewYorkJon34 · 03-13-2011, 08:36 PM

Got the RE-11's already Alex, lol how do you like them compared to the hankooks? The Z already has negative camber to begin with, are you lowered?

spearfish25 · 03-13-2011, 09:09 PM

I'm at stock height. Only suspension and wheel changes are the Hotchkis sways and H&R spacers. Too soon to say about the RE-11s. They're definitely more noisy than the Hankooks. I'll have a better idea about them after my highway run to work tomorrow.

Baer383 · 03-13-2011, 09:30 PM

Quote:

Originally Posted by spearfish25

I'm at stock height. Only suspension and wheel changes are the Hotchkis sways and H&R spacers. Too soon to say about the RE-11s. They're definitely more noisy than the Hankooks. I'll have a better idea about them after my highway run to work tomorrow.

I'm sure you know that the H&R spacers will add a little - camber

NewYorkJon34 · 03-13-2011, 09:35 PM

What size tires did you go with?

spearfish25 · 03-13-2011, 09:37 PM

Quote:

Originally Posted by Baer383

I'm sure you know that the H&R spacers will add a little - camber

Sure. I had the same 'dust pattern' on the tread of my RE050As BEFORE spacers though. So I think the spacer impact on camber is pretty minimal.

My first set of tires wore very evenly, so I agree with you guys who say this contact patch is a-OK. Maybe the track days helped wear the outer portions of the tire more evenly.

Quote:

Originally Posted by NewYorkJon34

What size tires did you go with?

I was going to get the same as the Hankooks...255/285. But the RE-11s come in some different profile heights so I instead went with 265/35 and 285/35.

Baer383 · 03-13-2011, 09:39 PM

Just do a couple of burnouts and see which tread is new and which is worn.

cossie1600 · 03-14-2011, 12:59 AM

awww you wimped out, should have gone with the 285 all around! You are fine, front tires will wear out way quicker than the rear anyway.

SPOHN · 03-14-2011, 08:20 AM

Quote:

Originally Posted by Baer383

I'm sure you know that the H&R spacers will add a little - camber

Quote:

Originally Posted by Baer383

Just do a couple of burnouts and see which tread is new and which is worn.

That looks about just like mine. But I have 265/305 tires. My front and rear camber is -1.3/ -1.6.

spearfish25 · 03-14-2011, 08:43 AM

Quote:

Originally Posted by cossie1600

awww you wimped out, should have gone with the 285 all around! You are fine, front tires will wear out way quicker than the rear anyway.

Given that I'll be tracking often, I didn't want to go out of spec limits on the front. 285s up front are out of spec on 9.5" rims.

03-13-2011, 06:10 PM	#3 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 29	your back wheels will have .5-.9 more neg. camber,judging from the dirt pattern on the rear tires I wouldn't worry about it. __________________ 2013 ZL1 754 rwhp 747 rwtq

03-13-2011, 06:25 PM	#4 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	Yeah, dirt pattern is what I was using as implied camber indicator. Tire pressures are 35psi currently. __________________ 2013 Cadillac V-Wagon, RIP Z

03-13-2011, 07:26 PM	#5 (permalink)
Zerafian A True Z Fanatic Join Date: Jan 2009 Location: Chattanooga, TN Posts: 1,334 Drives: 13' MB 370z Rep Power: 24238	camber looks completely acceptable. If the 370z stock camber is anything like the 350 your gonna be around -1.1 to -1.6 __________________ LC500 exhaust set uphttps://www.youtube.com/watch?v=bI7DiA43ZYw&t

03-13-2011, 09:09 PM	#8 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	I'm at stock height. Only suspension and wheel changes are the Hotchkis sways and H&R spacers. Too soon to say about the RE-11s. They're definitely more noisy than the Hankooks. I'll have a better idea about them after my highway run to work tomorrow. __________________ 2013 Cadillac V-Wagon, RIP Z

03-13-2011, 09:39 PM	#12 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 29	Just do a couple of burnouts and see which tread is new and which is worn. __________________ 2013 ZL1 754 rwhp 747 rwtq

03-13-2011, 06:05 PM	#2 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 119	Can't see much in the way of camber in those pics, so it's hard to say. Did you check your tire pressures?

03-13-2011, 07:55 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	This is normal. This is why tire manufacturers started making more asymetrical tires with reinforced inner tread belts to sustain proper posture while going straight. Think of these tires having two work modes..one for straight, one for cornering. (+wet/dry)

03-13-2011, 08:36 PM	#7 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1064	Got the RE-11's already Alex, lol how do you like them compared to the hankooks? The Z already has negative camber to begin with, are you lowered?

03-13-2011, 09:35 PM	#10 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1064	What size tires did you go with?

03-14-2011, 12:59 AM	#13 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 29	awww you wimped out, should have gone with the 285 all around! You are fine, front tires will wear out way quicker than the rear anyway.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camber much?	Junior370z	Nissan 370Z General Discussions	14	11-21-2010 09:26 PM
camber kit	CWofRR	Brakes & Suspension	0	07-09-2010 11:42 PM
Camber, Camber...More Camber	SoCal 370Z	The Lounge (Off Topic)	6	06-14-2010 11:55 PM
camber arm or not.	COD4	Brakes & Suspension	0	02-17-2010 09:07 AM