http://i940.photobucket.com/albums/a...ps75cda4e8.jpg

http://i940.photobucket.com/albums/a...ps080554a9.jpg

http://i940.photobucket.com/albums/a...ps66135dd6.jpg

http://i940.photobucket.com/albums/a...ps79a0cdba.jpg
2) Name of the Rim, (Brand, type, color)
Work Emotion CR Ultimate Matte bronze

3) Rim Size (Height X Width + Offset)
19x10.5 +32 (F) 19x10.5 +22 3mm spacer to clear calipers (R), 5mm spacer on back

4) Name of the tire
Bridgestone (RE11)

5) Tire size (Width/Profile/Rim)
Tire Size: 285/35/19 (front), 285/35/19 (rear)

6) Spring/Coilover Set up
Swift springs


7) Camber settings
FRONT: -1.8
REAR: -2.1

8) Fenders
Unrolled

9) Comments before modifing the car to make the rims fit
after i got it alignment done it seemed the top of the rears were to far in sto added the 5mm spacer

10) Comments after modifications done to the car
No Rubs

11) Additional comments
not sure if i should have gone with a different offset in the front.
spoke to front calipers
http://i940.photobucket.com/albums/a...psk1hijhf9.jpg

12) wheel and/or tire weight
Whees 24lbs tires 33.

1) Volk Racing GT-30 RED
2) Front 9.5 +25mm 255/35/20 and Rear 10.5 +23mm 285/30/20
3) Hancook EVO V12
4) BC BR coilovers. 2" drop front 1.75" rear. with 25mm spacers in the back.
4) -2.5 front and -3.0 in the back.
5) No fenders rolled.
6) Rubs a bit on softest setting up front.
7) Never weighted them with tires. Rims are 25lb a piece (front). 28lb rear.
8) sits very flush.

http://i8.photobucket.com/albums/a22...ps186bb245.jpg

http://i8.photobucket.com/albums/a22...psb2623b5c.jpg

http://i8.photobucket.com/albums/a22...ps340eb10f.jpg

:icon14:

Does any one have 370z with varrestoen es112?? Please this would help a lot

Here ya go
Nissan 370Z Forum - Skullmike21's Album: my z - Picture

I don't know how I missed this thread....

Rays Volk Racing G25
19x9.5 +22 & 19x10.5 +22 (+7 after 15mm spacers) w/ Potenza RE-11 265/35/19 & 305/30/19

http://www.the370z.com/members/fairl...1402978463.jpg
http://www.the370z.com/members/fairl...e1ea943f-k.jpg

ADVAN RZ-DF Flat Black
19x9 +25 & 19x10.5 +15 w/ stock sport tires

http://www.the370z.com/members/fairl...34847-042a.jpg
http://www.the370z.com/members/fairl...e34846-013.jpg

Work Meister S1R in Bronze Anodized
19x9.5 +22 & 19x10.5 +15 (-5 w/ 20mm spacers)
w/ stock sport tires

http://www.the370z.com/members/fairl...-img-0023a.jpg
http://www.the370z.com/members/fairl...-img-0025a.jpg

Here's mine:

http://i110.photobucket.com/albums/n...ps2f97336e.jpg
http://i110.photobucket.com/albums/n...ps84229b7d.jpg
http://i110.photobucket.com/albums/n...psac9de90d.jpg
http://i110.photobucket.com/albums/n...psf63c7bd2.jpg
http://i110.photobucket.com/albums/n...psacf575f5.jpg
http://i110.photobucket.com/albums/n...ps8680add3.jpg
http://i110.photobucket.com/albums/n...ps7be2e1fe.jpg
http://i110.photobucket.com/albums/n...psfadc72a9.jpg
http://i110.photobucket.com/albums/n...ps08d965af.jpg
http://i110.photobucket.com/albums/n...ps82a530af.jpg
http://i110.photobucket.com/albums/n...psd3aa3f41.jpg

One of a kind custom BKB WORK VS XX 20x9.5" +20 "T" Disk on the front and 20x12" +26 "A" Disk on the rear. 265's on the fronts and 325 on the rears. Lowered on Swifts. No fender rolling or pulling. -1.9 degree's camber in the rear and -2.0 on the front. No rubbing.

R.K.

2) Name of the Rim, (Brand, type, color)
TSW Nerburgring (sp?) gunmetal gray

3) Rim Size (Height X Width + Offset)
18x7.5 front 18x10.5 rear

4) Name of the tire
Nitto555 all around

5) Tire size (Width/Profile/Rim)
see signature for sizes

6) Spring/Coilover Set up
n/a

7) Camber settings
stock

8) Fenders
Unrolled

9) Comments before modifing the car to make the rims fit
perfect fit

10) Comments after modifications done to the car
shoulda gone bigger than 255 in the front


11) Additional comments
homeboy at tirebarn said the biggest i could go was 255 in front, so i opted for that.

12) wheel and/or tire weight
n/a

https://scontent-b-nrt.xx.fbcdn.net/...10955354_o.jpg
https://fbcdn-sphotos-h-a.akamaihd.n...81045419_o.jpg
https://scontent-b-nrt.xx.fbcdn.net/...57441712_o.jpg

2) SSR Professor MS3 in SBC Super Black Coat
3) 19X9.5+25HP (Hyper Disk), 19X10.5NR (Normal Disk)
4) Michelin Pilot Super Sports
5) 265/35/19, 305/30/19
6) KW V3 lowered just less than 1" still on factory KW damper and rebound settings
7) Eibach/ SPC set to 0 degrees camber
8) Fenders: Still untouched and no rubbing or clearance issues at all with a flush kinda look :)

(F)Volk TE37SL 19x 91/2 J22 245/40/19 Yokohama Advan Neova AD08R (R)Volk TE37SL 19 x 10 1/2 J22 295/30/19 Yokohama Advan Neova AD08R. No Fitment problem or rubbing....

[Official] 370z wheel fitment guide (pics/specs) only
 

Attachment 96429
Attachment 96430
Attachment 96431

19x10 +0 F 225/35

19x11 +0 R 245/35

H&r springs, no camber adjustments.

subd lets see some more Z's!!!!

Forgestar F14 with limited edition red centers
19x10 +20 w 255/35/19 and 19x11.5 +25
I don't know if I want to run a 295 or 305 /30/19
I plan on going swift lowering springs or whatever gets me the most low w good performance until I can afford coils.
no rolling or anything yet other ppl with like offsets seem to be ok

Vossen VFS1
 

Because I am in the process of copying the wheel/suspension setup of the Vossen "Fanta-Z" I post pictures of their car instead of my own car. But it'll look the same (also got Amuse body kit)

1) A Picture or a link must be posted (Please include 1-3 pics not a million pics)
https://farm4.staticflickr.com/3875/...e287feb9_b.jpg
https://farm4.staticflickr.com/3915/...213e7a69_b.jpg

2) Name of the Rim, (Brand, type, color)
Vossen VFS-1 matte graphite

3) Rim Size (Height X Width + Offset)
Front: 20x9.5 ET25 (mid-face concave)
Rear: 20x12 ET30 (deep concave)

4) Name of the tire (Brand, type)
The Fanta-Z runs Yokohama ADVAN Sport
but I chose Michelin Pilot Supersport XL

5) Tire size (Width/Profile/Rim)
Front: 245/35ZR20 (95Y)
Rear: 305/30ZR20 (103Y)

6) Spring/Coilover Set up (include height drop or stock, include any other specs)
KW Variant 3 coil-over

7) Camber settings
unknown

8) Fenders (Rolled, trim, stock,ect) (include details, major rolling required?)
stock, no interference

9) Comments before modifying the car to make the rims fit (Rubbing issues, clearance? Lock to lock?)
n/a

10) Comments after modifications done to the car (Does if fit now after rolling fenders, camber adjustments? Lock to lock?)
n/a

11) Additional comments (how does it look? aggressive? Flush? recommendation?)
Flush fit. I personally find the VFS-1 look on an Amuse 370Z fanta-stic. Can't wait to get mine :driving:

12) wheel and/or tire weight
Vossen claims the VFS-1 is the lightest rim in their entire rim line-up.