Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Wheels & Tires (http://www.the370z.com/wheels-tires/)
-   -   [Official] 370z wheel fitment guide (pics/specs) only (http://www.the370z.com/wheels-tires/27780-official-370z-wheel-fitment-guide-pics-specs-only.html)

///maestro 02-16-2015 08:33 PM

bump :-)

KittenMittens 02-16-2015 08:54 PM

Quote:

Originally Posted by Dallaz (Post 2303917)

Specs:
Vossen CV3's
Front 20x9 +20 245/30/20
Rear 20x10.5 +15 285/30/20
Powertrix Coilovers ~1 1/4" drop
No spacers
No Camber adjustments



http://images.us.viewbook.com/9b5475...4d56_large.jpg


http://images.us.viewbook.com/eaff37...78a6_large.jpg


http://images.us.viewbook.com/a964d2...c75e_large.jpg


http://images.us.viewbook.com/7e3a77...97a0_large.jpg



Exact setup I've wanted! :yum: Thanks for the bump.

kazman 02-18-2015 06:02 PM

Quote:

Originally Posted by Onikage_87 (Post 2997775)
https://scontent-b-nrt.xx.fbcdn.net/...10955354_o.jpg
https://fbcdn-sphotos-h-a.akamaihd.n...81045419_o.jpg
https://scontent-b-nrt.xx.fbcdn.net/...57441712_o.jpg

2) SSR Professor MS3 in SBC Super Black Coat
3) 19X9.5+25HP (Hyper Disk), 19X10.5NR (Normal Disk)
4) Michelin Pilot Super Sports
5) 265/35/19, 305/30/19
6) KW V3 lowered just less than 1" still on factory KW damper and rebound settings
7) Eibach/ SPC set to 0 degrees camber
8) Fenders: Still untouched and no rubbing or clearance issues at all with a flush kinda look :)

pm sent :hello:

Vic 370z 03-02-2015 11:12 PM

Ok great thread , so I'm looking for some advice maybe some ideas , im going to run F- 20×10 +22 275/30/20 R- 20×11 +17 305/30/20 and trying to figure out what kind of drop to go with don't want to fender roll/pull but want to clear the gap between fender and tire can some one help me figure this out ... thanks 370z.com

Chasingstatus 03-26-2015 05:11 PM

4 Attachment(s)
Forgestar F14's painted white with limited edition red center caps
19x10 +20 w 255/35/19
19x11.5 +25 295/30/19
Hankook ventus V12 Evo 2
Ark gt-f lowering springs
No roll or pulling on the fenders the tires fit really perfect actually.
I just took it off of the jack stands about 5 minutes before I took these pics. I am hoping the springs will settle a bit more and possibly go a bit lower. Either way I would like to grab up some coils in a big but I have to focus on clutch/flywheel and a CSC fix before I can buy any though.

kentstuh 04-09-2015 04:16 PM

2 Attachment(s)
Work VS-XX Step Lips / Matte Black face - Anodized Gloss Black barrel - Gold hardware

Front: 19x9.5 +23 / 5x114 [T-Disk] Rear: 19x10.5 +19 / 5x114 [A-Disk]

Hankooks V12 Evo2 F:265/35/19 R:305/30/19

Dropped on Swifts Spec R

Camber OE

No need for fender work.

No rubbing issue at all.

Had to use 10mm spacer [H&R DRS] for the rear.

Ryguy 04-20-2015 02:20 PM

Work Emotion CR Ultimate with a matte Bronze finish

F: 19x9.5 +25
R: 19x10.5 +22

Michelin Pilot Sport A/S 3

F: 255/40/19
R: 285/35/19

Stock suspension

Stock Camber settings

Stock Fenders (no modification)

When I need new tires I will probably go with a 295 tire in the rear. The 285 fits fine, but I personally think a 295 will look a little more flush. I may feel different when I get coilovers and lower the car a bit. The front sticks out slightly but it isn't very much at all. I was told Work recommended to go with the +15 offset in the front, I am really happy I stuck with the +25.

https://wheelwell.s3.amazonaws.com/f...gCfaJ9Ms91I%3D

https://wheelwell.s3.amazonaws.com/3...s1g18ot8PyE%3D

fire165 04-24-2015 01:37 PM

Owners with sport package.
If you have 19×9.5 up front, what offset clears the big brakes??
Thinking of +12 or lower, but no idea if it'd clear.
Thank you.

Bananaz 04-24-2015 08:03 PM

Depends on the spokes it's not always offset but usually +15 or lower always clears

Ryguy 04-24-2015 08:07 PM

I don't have the sport package but I was told that I would need at least +25 to clear the sport brakes with Work's Emotion CR Ultimate.

gstraw 04-29-2015 04:20 AM

Not seen any people running 19 front and 20 rears. I'm thinking of this since my front looks great with 19 but rears look lost. Plus extra wall on the front helps with comfort!


Sent from my iPhone using Tapatalk

chingster 05-16-2015 10:02 PM

Been lurking the370z for years, first-time poster now that I have my Z!

Needed some advice on my situation:

Currently looking at a really good deal consisting of 4 Vertini Drift rims, but thing is they are all the same size at 19x9.5. I noticed almost everyone in this thread has there rear rims bigger at 10.5+. Are there any drawbacks for putting on all of the same size rim other than the deeper/concave look on the rears?

For tires I was then going to put 245/45/R19 on the front and 285/45/R19 in the rears.

Not sure if I need spacers or not to make the wheels flush with the car.

Does my plan make sense? Could I do 295s on the rears as well?

Thanks everyone!

AntiVenom 05-17-2015 09:44 AM

Quote:

Originally Posted by chingster (Post 3200121)
Been lurking the370z for years, first-time poster now that I have my Z!

Needed some advice on my situation:

Currently looking at a really good deal consisting of 4 Vertini Drift rims, but thing is they are all the same size at 19x9.5. I noticed almost everyone in this thread has there rear rims bigger at 10.5+. Are there any drawbacks for putting on all of the same size rim other than the deeper/concave look on the rears?

For tires I was then going to put 245/45/R19 on the front and 285/45/R19 in the rears.

Not sure if I need spacers or not to make the wheels flush with the car.

Does my plan make sense? Could I do 295s on the rears as well?

Thanks everyone!

This question probably belongs in the "will it fit?" thread for what it's worth. So, I answered it over here Will it Fit? Thread

AntiVenom 05-17-2015 10:03 AM

Quote:

Originally Posted by gstraw (Post 3182142)
Not seen any people running 19 front and 20 rears. I'm thinking of this since my front looks great with 19 but rears look lost. Plus extra wall on the front helps with comfort!

I've wondered about this as well. I think it would work well with our thinner front fenders and the more bulky rear fenders. We just need a guinea pig...

Not it! :rofl2:

RayMaN 05-20-2015 09:55 AM

2 Attachment(s)
Anyone have any similar to these? Love the 6/7 spoke wheels..

Attachment 103598
Attachment 103599


All times are GMT -5. The time now is 05:15 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2