Wheels: Work MCO Racing White 18x10 +20 and 18x11 +18 (and rear 10mm spacers)
Tires: Toyo R888R 265/35/18 and 295/30/18
Coilover: Zeal Function X
Camber: didn't check, but front was around -3.3 and rear about -2.5
No fender modifications

The wheels was for a friend for track, I tested the fitment on my car (just one side) so the alignment setup were from my original setup.

http://www.the370z.com/attachment.ph...1&d=1540980744

http://www.the370z.com/attachment.ph...1&d=1540980744

http://www.the370z.com/attachment.ph...1&d=1540980744

http://www.the370z.com/attachment.ph...1&d=1540980744

Can Tire Rack be trusted? I'm looking at a set of 20" wheels...they suggest a 285/30/20 for the back. That's a full inch wider than the stockers I have on 18s now. They say they'll fit my car. What says the experts? I don't want tire rub. Suspension is stock and will likely stay that way.

Fronts:

Size: 20x9
Offset: 20mm
245/35/20 tire

Rears:

Size: 20x10.5
Offset: 25mm
285/30/20 tire

Tire Rack's is flaming hot garbage that is super duper conservative. Their whole system is stupid, you can't browse by specific size and spec

The nismo runs 19x10.5 +23 with a 285/35/19. Your rears are essentially the same damn thing. Should be fine.

Hell, people use the 19x10.5 +12 fitment with 305 in the back without problems

Fronts will stick out about 14mm further than stock nismo (19x9.5 +40 with 245/40/19)

This MIGHT pose an issue.

Any alignment changes needed? And on the fronts, is the fender lip where my concern would be?

370Z front alignment is not adjustable. You need the SPL Front Upper Control Arms, which are caster/camber adjustable.

Fender rolling isn't that hard, its like $40 a corner from a pro shop.

Rears . . . like i said, STOCK NISMO uses that same size

thanks for the replies

Vossen vws-2

20x9.5 +32 in front 265/30/20 tires
20x11 +37/38 ( not sure ) 295/30/20

Any help/comments fitting them on 370z? Any problems? What to do? Will be running on hsd coils

no problems fitting

will look like hot garbage

refer to posts above yours

Will I have any problem with a Forgestar CF5V 19 x 9.5 SDC +12 up front fitting flush? I'm at stock ride height and want it as flush as possible. Thank you

Sent from my SAMSUNG-SM-G930A using Tapatalk

I used to run a 9.5 Et 15 and with stock camber it was poking, with -2.5 it was exactly flush. For reference they were wrapped in r888r 275/35/18. Just to let you know you would have to get really aggressive in the rear so it doesn’t look reverse staggered

It's gonna poke at stock height

Stop ******* around

Get coils and arms and drop the damn thing

It's a daily driver so no

Sent from my SAMSUNG-SM-G930A using Tapatalk

aint no reason you can't daily it

That statement says I can't daily drive it. You understand how the English language works, right?

Sent from my SAMSUNG-SM-G930A using Tapatalk

He wants everything dropped. :shakes head: