I'm just lowered on Stance GR+ coils, with the spc rear camber kit, and the spl front upper control arms. There are no rubbing issues or issues turning full radius.

Rear side view for flushness
https://i.imgur.com/yfd3Uy5h.jpg

Front side view
https://i.imgur.com/cevC2szh.jpg

Rear wheel gap
https://i.imgur.com/oYXwxVCh.jpg

Front wheel gap
https://i.imgur.com/uMbNAPIh.jpg

09 Touring
 

09 GTR Premium Wheels

20x9.5 +25
20x10.5 +45

Michelin Pilot Super Sports

255/40R/20
285/35R/20

Tein S Tech's
SPC Front and Rear Camber kits - camber withing stock limits

25lbs front, 27lbs rear

Had to trim front fender liners where the fender attaches to the bumper otherwise no interference.

Not flush, but i'll never run spacers again after using them on the base 18's. So much more grip than stock Yoko's, not much louder either.


Attachment 128933
Attachment 128934

This is the wheel setup that should be everyone's baseline to work off of

I have a:
370z || Base Model || 7AT || 2015 Vehicle

OEM Tires and Rims

I am thinking about changing out the tires for better ones, but I could care less about the rims.

Would someone be able to help me confirm or not if:
305/35/19 sized tires would replace the two rear tires, and if I could still use the OEM rims on these or no?

Please and thank you!

What is your front tire size? The 305/35-19 tire is about 27.4" tall.

only thing better would be to get the camber and ride height compared to stock.

Base wheels are 18" in diameter, so 19" won't fit. ;)

And, 305/35 is too wide for base 9" rear rim.

Darn it.
So I would need to change BOTH the rims and tires then...

Ugh.
Okay thank you.

Let's not throw the baby out with the bath water. Are you wanting to run a drag radial as a 305/35/18 will work on the rear a stock height. You probably need 10" rim width. Most run a 19" wheel up front to get a tire height that is close to the rear.

Okay. You are right. I can go 10.5" to 11.5" rim width for the 305 35 19 tires in the rear :D

http://www.the370z.com/members/igota...96968087-o.jpg

http://www.the370z.com/members/igota...93187518-o.jpg

http://www.the370z.com/members/igota...96968527-o.jpg

http://www.the370z.com/members/igota...65145125-o.jpg

http://www.the370z.com/members/igota...96970837-o.jpg

http://www.the370z.com/members/igota...65620301-o.jpg

Thanks to all for helping guide me with my wheel/tire/suspension upgrades!

Work Cr2p 19x9.5 +15 (f); 19x11 +13 (r)
Michelin Pilot Sport 4s 255/35/19 (f); 305/30/19 (r)
KW v3 set to factory dampening setting
SPC front and rear camber kit
Two finger gap; will drop another 1/4-1/2" once springs settle
Alignment is more or less within spec; could use minor castor adjustment
No fender mod, no rubbing (even at high speed over moderate bump)
Front pokes a tad more than back but still more or less flush
Front tire has a very minimal stretch, while back is fully square
Would not go any lower; this setup has the ideal look/functionality balance

Work XSA04c

20/10 +10(r disk)
20/11.5 +10(w disk)

Michelin PSS 255/35 front, 305/30 rear

Stance XR coils(true style) SPL rear camber and toe arms. SPC front control arms



Fenders still stock. I get some rubbing up front on incline roads when wheel is angled into a turn. Rolling the front fenders, NOT pulling, would fix the issue.

Cant put my pinky between the tire and fender of the front or the back

Alignment settings as of yesterday

https://i.imgur.com/QuktApC.jpg


Pics

https://i.imgur.com/TNZdQfr.jpg
https://i.imgur.com/haCAzzK.jpg

https://i.imgur.com/ViigUJt.jpg

https://i.imgur.com/iVP3gfI.jpg

This is a classic and comfortable fit for a daily. Very happy with the offsets. Inconspicuous and fairly flush. Cheap tyres due to the common sizes.
1) Pics - see links below
2) Work Emotion Kiwami AHG (bronze)
3) 19x9.5 +25 / 19x10.5 +12
4) Dunlop Sportmaxx 050+
5) 275/35R19 / 245/40R19
6) Standard suspension
7) Standard camber
8) Standard fenders
10) Perfect fit
11) Flush fit, almost perfect. Will review the tyre sizes once I install coilovers.
12) Haven’t weighed the wheels, sorry.
https://www.instagram.com/p/BlzSB64H...ken-by=paracin
https://www.instagram.com/p/BlzR43wn...ken-by=paracin
https://www.instagram.com/p/BlzTKUBH...ken-by=paracin
https://www.instagram.com/p/BlzTGsjn...ken-by=paracin

wow just wow

Just put on my winter setup.

Running 245/45/R18 Michelin X-Ice Xi3 in all 4 corners.
18x9" ET25, with 20mm spacers in the rear.

https://i.imgur.com/ocGrtD8_d.jpg?ma...&fidelity=high

Fills in the wheel wells pretty good, no rubbing that I am aware of.
https://i.imgur.com/Da2m4qP_d.jpg?ma...&fidelity=high
https://i.imgur.com/U8lfZtj_d.jpg?ma...&fidelity=high
https://i.imgur.com/5sDGe4L_d.jpg?ma...&fidelity=high