The "Will it fit?" thread

Wuero370z · 03-10-2022, 09:19 PM

Picking up some Gram Lights 57FXZ in 19x10.5 +22. Squared setup. I woulda liked a staggered but the guy gave me a decent deal so we’re here.

I was about to switch tires on my v1 nismo wheels when they got stolen so I have nitto invos waiting to be mounted already. 285/30-19 and 325/30-19.

I just want to confirm I can squeeze the 325 on that wheel as well as making sure I won’t have an ugly poke in the front. Nitto states minimum size wheel for 325 is 11.0 but I had no issues with the OEM 10.5in wheels so I’m assuming that will be fine…

As for the front I was pretty “flush” with the 285 tire size on a 9.5 so I’m unsure if adding an inch to the rim AND reducing offset from +40 to +22 will drastically change the poke since the tire is still the same size. From what I calculated I’ll be about 1.7” further out with this combo. +1” in rim and then another ~.7” due to the offset. Will this be hideous? Could a smaller tire make this look less pokey?

Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official The370Z "Hot Girls with Hot cars" thread NSFW 01.01.09	AK370Z	Gentleman's Club	187	01-12-2011 12:24 AM
why did the thread "Sharing a bad experience with my 370Z" get closed?	TheSnakeJake	Nissan 370Z General Discussions	1	03-26-2010 11:35 PM
Why there isn't a "Monterey Blue"370Z thread?	Devil Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	08-24-2009 01:55 PM
Official "Guess the Stig's Time" Thread	ResIpsa	Nissan 370Z General Discussions	11	07-27-2009 09:45 PM
Official "Nissan 370Z spotted in Japan" Thread	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	120	05-01-2009 09:30 AM

03-10-2022, 09:19 PM	#11 (permalink)
Wuero370z Enthusiast Member Join Date: Nov 2018 Location: Albuquerque Posts: 358 Drives: 2013 Nissan 370z Rep Power: 6718	Picking up some Gram Lights 57FXZ in 19x10.5 +22. Squared setup. I woulda liked a staggered but the guy gave me a decent deal so we’re here. I was about to switch tires on my v1 nismo wheels when they got stolen so I have nitto invos waiting to be mounted already. 285/30-19 and 325/30-19. I just want to confirm I can squeeze the 325 on that wheel as well as making sure I won’t have an ugly poke in the front. Nitto states minimum size wheel for 325 is 11.0 but I had no issues with the OEM 10.5in wheels so I’m assuming that will be fine… As for the front I was pretty “flush” with the 285 tire size on a 9.5 so I’m unsure if adding an inch to the rim AND reducing offset from +40 to +22 will drastically change the poke since the tire is still the same size. From what I calculated I’ll be about 1.7” further out with this combo. +1” in rim and then another ~.7” due to the offset. Will this be hideous? Could a smaller tire make this look less pokey? Sent from my iPhone using Tapatalk