The "Will it fit?" thread

[justin_boy]

2019 nismo

f 18 x 10 et 35 toyo r888r 275/35/18

r 18 x 12 et 27 toyo r888r 305/35/18

so we confirmed I can throw a 335/30/18 on the rears no problem. what about putting 295/30/18 on the fronts. Has anyone done this? again only worried about inside clearance

[Hotrodz]

Originally Posted by justin_boy

2019 nismo

f 18 x 10 et 35 toyo r888r 275/35/18

r 18 x 12 et 27 toyo r888r 305/35/18

so we confirmed I can throw a 335/30/18 on the rears no problem. what about putting 295/30/18 on the fronts. Has anyone done this? again only worried about inside clearance

It all depends on your off sets. I run 18 x 11 +18 square and rull 315/30 square with zero issues front or back.

Sent from my SM-G965U using Tapatalk

[justin_boy]

Originally Posted by Hotrodz

It all depends on your off sets. I run 18 x 11 +18 square and rull 315/30 square with zero issues front or back.

Sent from my SM-G965U using Tapatalk

offsets are 35 up front and 27 in the rear

[Hotrodz]

Originally Posted by justin_boy

offsets are 35 up front and 27 in the rear

You will need a 15 mm spacer all the way around. Also you will have some poke. Not much in the rear but noticable in the front. I run a a track setup at -3 or better up front and there is about a .5" poke or so.

Sent from my SM-G965U using Tapatalk

[justin_boy]

Originally Posted by Hotrodz

You will need a 15 mm spacer all the way around. Also you will have some poke. Not much in the rear but noticable in the front. I run a a track setup at -3 or better up front and there is about a .5" poke or so.

Sent from my SM-G965U using Tapatalk

just what I was trying to avoid

will I need to in the rear to fit?

[jchammond]

Originally Posted by justin_boy

2019 nismo

f 18 x 10 et 35 toyo r888r 275/35/18

r 18 x 12 et 27 toyo r888r 305/35/18

so we confirmed I can throw a 335/30/18 on the rears no problem. what about putting 295/30/18 on the fronts. Has anyone done this? again only worried about inside clearance

I ran 285/35/19’s up front...on 19x10+38 & no issues with factory -1.0* camber

[Hotrodz]

Originally Posted by jchammond

I ran 285/35/19’s up front...on 19x10+38 & no issues with factory -1.0* camber

Remember he running 18's and they go to clear big brakes. I can run a 295 30 on my 18x10.5 +30 with no issues on the front. I run a spacer in the back to make it +15 so it fits flush and has a wider stance.

Sent from my SM-G965U using Tapatalk

[jchammond]

Originally Posted by Hotrodz

Remember he running 18's and they go to clear big brakes. I can run a 295 30 on my 18x10.5 +30 with no issues on the front. I run a spacer in the back to make it +15 so it fits flush and has a wider stance.

Sent from my SM-G965U using Tapatalk

Closer to the knuckle too; as 19’s & 20’s can go deeper in that spot.
I don’t recall him mentioning his suspension mods or camber settings

[Hotrodz]

Originally Posted by jchammond

Closer to the knuckle too; as 19’s & 20’s can go deeper in that spot.

I don’t recall him mentioning his suspension mods or camber settings

Yep and you are spot on the tire size.

Sent from my SM-G965U using Tapatalk

[justin_boy]

Originally Posted by jchammond

Closer to the knuckle too; as 19’s & 20’s can go deeper in that spot.
I don’t recall him mentioning his suspension mods or camber settings

suspension
KW V3
spl billet rear camber arms and thats it

camber -2.5 all around

I lifted my the car and reached back there and looks like im already cutting it close to the strut housing

i think ill stick with the 275 up front but go to the 335 in the rear

[jchammond]

Originally Posted by justin_boy

suspension
KW V3
spl billet rear camber arms and thats it

camber -2.5 all around

I lifted my the car and reached back there and looks like im already cutting it close to the strut housing

i think ill stick with the 275 up front but go to the 335 in the rear

2” stagger on wheels can usually run the same offset w/same camber F&R...you shouldn’t need more than a 10mm Max spacer up front & may get away with a 5mm slip on...that’s gonna be your pinch point...@the knuckle.
Hopefully everything clears without spacers...as there’s no movement up front once wheels are bolted on; unless you’re hub bearings go bad...I had about 1/2” or so at knuckle with +38 offset 10’s...but they were 19’s & only-1.0 factory camber.
Merry Christmas

[jchammond]

Originally Posted by justin_boy

2019 nismo

f 18 x 10 et 35 toyo r888r 275/35/18

r 18 x 12 et 27 toyo r888r 305/35/18

so we confirmed I can throw a 335/30/18 on the rears no problem. what about putting 295/30/18 on the fronts. Has anyone done this? again only worried about inside clearance

Not sure if clearance will be an issue; unless you have a lot of negative camber...I’d be more concerned of the Christmas Tree effect