Nissan 370Z Forum - The "Will it fit?" thread

Page 98 of 225

« First

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Wheels & Tires (http://www.the370z.com/wheels-tires/)

- - The "Will it fit?" thread (http://www.the370z.com/wheels-tires/17683-will-fit-thread.html)

14BlackCherry

01-23-2016 05:34 PM

So I'm looking for some 18" wheels for autocross since I'm running STR. I was looking at these Enkei RPF1. It's 18x9 +35 5x114.3. My question is will these fit over the sports brakes or will a wheel spacer be needed ando if so what size? I don't care about the sunken look since it's just for autocross. Thanks.

avery370z

01-26-2016 05:53 PM

Im thinking about trying to run a 19x11 front with a 305/30/19. Looking at an et of 27. Im lowered on H and R springs. Any help will be greatly appreciated.

jchammond

01-26-2016 06:26 PM

Quote:

Originally Posted by avery370z (Post 3398417)

Im thinking about trying to run a 19x11 front with a 305/30/19. Looking at an et of 27. Im lowered on H and R springs. Any help will be greatly appreciated.

Look at Car#17 on the [official] 370z wheel fitment guide (pics/specs) only
He's running 19x10+31's w/275/35 Nitto Invo's & is lowered on H&R springs

Try it & see

whiteZ34

01-28-2016 01:45 PM

So I'm running TE-37 Tokyo time attacks. 19x9.5 -22 front with 265/35-19 tires. 19x11 -15 rear with 305/30-19...would a 325/30 tires fit on my rears and does anyone know a good combo to put on the front with that, and if it'll fit?
Thank you

Rusty

01-28-2016 07:30 PM

Quote:

Originally Posted by whiteZ34 (Post 3399943)

275/35-19's will fit on the front rims, and the 325/30-19 will fit on the rear rims. But I don't know about your offsets.

whiteZ34

01-28-2016 07:45 PM

Quote:

Originally Posted by Rusty (Post 3400097)

275/35-19's will fit on the front rims, and the 325/30-19 will fit on the rear rims. But I don't know about your offsets.

Thanks rusty, I know the tire sizes will fit for sure. That's not the issue..worried about having those sizes on the car and rubbing issues, with the sizes and my offsets.. It's a flush fitment already as the car sits

jchammond

01-29-2016 04:15 AM

He must have ment +22/15's

Sent from my iPhone using Tapatalk

jchammond

01-29-2016 04:20 AM

Quote:

Originally Posted by whiteZ34 (Post 3399943)

Rusty confirmed the fitment of the 325/30 on the 11",,,So you can take that to the Bank!
What kind of driving are you doing & is it a daily driver?

Sent from my iPhone using Tapatalk

BrockDM1

01-29-2016 01:28 PM

Quote:

Originally Posted by BrockDM1 (Post 3378874)

I am looking to put my old set of Vossen CV5's on my 15 Nismo in the spring. They are 20x9+35 245/35 and 20x10.5+45 275/30.

I was wondering what a good size spacer to run would be?

I dont want it too aggressive because the new Nismo has fender flares that stick in the wheel well more than the fender does.

I am lowered on coilovers, from the center of the fender to the ground is 26.25" in the front and 26.5" in the rear.

Thanks

So i posted this in the past and I had a quick question.

I am going to run a 15mm front spacer and a 30mm rear but my biggest concern is will it rub on the 2015 Nismo fender flares? I know guys were saying no but im not sure if they were basing that off of a regular z fender.

Anthony@Royal

01-29-2016 02:10 PM

Quote:

Originally Posted by BrockDM1 (Post 3400614)

Regular Z fenders or Nismo doesn't matter. The nismo "fender flares" are just little side moldings added onto the regular Z fenders. Regardless, you should have any issues with those sizes.

BrockDM1

01-29-2016 02:18 PM

Quote:

Originally Posted by Anthony@Royal (Post 3400639)

Regular Z fenders or Nismo doesn't matter. The nismo "fender flares" are just little side moldings added onto the regular Z fenders. Regardless, you should have any issues with those sizes.

My concern was the flares have a lip that stick into the fender-well so i didn't know if that would cause rubbing.

Thank you though!

Anthony@Royal

01-29-2016 03:36 PM

Quote:

Originally Posted by BrockDM1 (Post 3400645)

My concern was the flares have a lip that stick into the fender-well so i didn't know if that would cause rubbing.

Thank you though!

I see what you're saying. Are you planning on lowering the car?

BrockDM1

01-29-2016 07:30 PM

Quote:

Originally Posted by Anthony@Royal (Post 3400745)

I see what you're saying. Are you planning on lowering the car?

It is lowered on Tein street flex coils. Roughly around an inch, no camber kits

Pic for reference
https://farm2.staticflickr.com/1676/...1362a50e_b.jpg

whiteZ34

01-30-2016 06:11 AM

Quote:

Originally Posted by jchammond (Post 3400265)

Rusty confirmed the fitment of the 325/30 on the 11",,,So you can take that to the Bank!
What kind of driving are you doing & is it a daily driver?

Sent from my iPhone using Tapatalk

It is not the issue of the tire fitting on the wheel. I know this...it is if the tire will fit without rubbing anywhere in the wheel well with my offsets.

cjwsrt6

02-02-2016 04:53 PM

Anyone know if we can fit a 305 35 19 on the rear?

All times are GMT -5. The time now is 11:20 PM.

Page 98 of 225

Show 40 post(s) from this thread on one page