295s are way too much tire for a 9" wheel.

The "Will it fit?" thread
 

Advice Z family...

So it seems that 265(35)/305(30) is the size of choice for 9.5/10.5

What would y'all run on 9.5/11?

I'm going to; when $$$$ get pumped back up & a 325/30 on it

I'm thinking more of a 19x9,11 combo w/265 or 275's up front & 325's back


Sent from my iPhone using Tapatalk

325 will be too tall.. 26.3 and 26.7 seems like a 315 may work but too bad there's nothing available in that size

Here are the specs...

F 20x10 +28 285 30 20
R 20x11 +15. 305 30 20

Lowered on swifts and have sport brakes... what do you all think... anyone running these specs?

Thanks!

The Rear looks good buy why the 20x10.0 +28 infront? Is that all they offer? I would lean towards a 9.5 +20ish wheel in front.

I'm sponsored by vertini... they send me wheels, I put them on and take photos and post ect ect... they want to send a 20x10 and a 20x11... I wish it was a 9 or 9.5....but after some research I figured 28 offset would be the best for my suspension setup... I think...

Edit I think I bought my lugs from ya lol. I'm in melbourne fl... any advice is appreciated

I run 265/35 and 305/30 RE-11s on my 9.5 and 11 Work wheels. The pics below were taken before the ride height and camber were adjusted. A different brand of tires will also provide a slightly different stretch.

http://i1043.photobucket.com/albums/...sojhgdszy.jpeg

http://i1043.photobucket.com/albums/...simyeysd3.jpeg

Looks good thanks for the pics.

I prefer my tires to have somewhat of a "square" look. Looking at the pics I posted, I'm pretty sure a 10mm wider tire front and rear on the same width wheels will fit, and may even look better. Again, tires of a different brand will look differently.

looking to run a 18x10.5 +30 nto3+m
with a 275/35 or 285/35

any clearance issues with the bbk or the suspension?

I know " martin82 " on the forums runs 18x10.5 +30 NT03+M all around with 15mm-20mm spacers in the rear with 285/35

Will clear your sport brakes and inside suspension.

325/30/19@26.7"Diameter is factory height DW!
only 2.7% difference if i choose this Route (3%max) ; I just may like a slight rake on my Stock Ride Height,-1* camber on all 4 corner ~Z~

Factory height for 245/40 on a 9. The rear is smaller overall.