Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Wheels & Tires (http://www.the370z.com/wheels-tires/)
-   -   The "Will it fit?" thread (http://www.the370z.com/wheels-tires/17683-will-fit-thread.html)

jchammond 09-27-2015 04:48 PM

Quote:

Originally Posted by joshdr (Post 3318097)
I bought a 2013 second hand z that already had aftermarket rims on it. The rims are ok, but my front tire looks bigger than the rear. How can I improve the look of this? Should I just ditch the wheels and start over?

Front: 20x8.5 offset 20. 245 35 20
Rear: 20x10 offset 25. 275 30 20

2nd- can I put 305 30 on the rear 10" rim?

Thanks

the suggested minimum rim size i see is 10.5",,,depending on what tire you are looking at & if you like a fat tire with a bit of bulge or not.
that's a 27.2" tire...your front's are 26.8"
A 295/30 is 27" and has just over an 11" tread on the Michelin PSS tire

JenovaI 09-28-2015 08:43 PM

Guys, I need some help in the "will it fit with spacers big enough to clear my BBK".

I have Maya STMs in: Front - 19x90 offset +30, Rear - 19x105 offset +29. That's what the label reads. Tape measure reads more like 10" and 11". I have the APRacing BBK currently, tried to put the fronts on, not enough caliper clearance. like a good 1/4" off. I also read a thread stating I'd need spacers so they'd fit flush with the fenders anyway.

I'm really bad with wheels and tires. Can someone tell me what spacers I would need to make these flush with my fenders on a 2011 370z base model? Hopefully that's enough clearance for my BBK.

Really appreciate it.
Jenova

jchammond 09-28-2015 09:10 PM

Quote:

Originally Posted by JenovaI (Post 3318823)
Guys, I need some help in the "will it fit with spacers big enough to clear my BBK".

I have Maya STMs in: Front - 19x90 offset +30, Rear - 19x105 offset +29. That's what the label reads. Tape measure reads more like 10" and 11". I have the APRacing BBK currently, tried to put the fronts on, not enough caliper clearance. like a good 1/4" off. I also read a thread stating I'd need spacers so they'd fit flush with the fenders anyway.

I'm really bad with wheels and tires. Can someone tell me what spacers I would need to make these flush with my fenders on a 2011 370z base model? Hopefully that's enough clearance for my BBK.

Really appreciate it.
Jenova

not sure about the brake clearance/but 10mm would put you @+20 front & 15mm would be +14 in rear,,,very close to flush...all pending tire size,camber,etc....
may could go 20mm in rear.
would be cool to have some loaners before making a purchase.

ourdelusions 09-28-2015 10:32 PM

Quote:

Originally Posted by JenovaI (Post 3318823)
Guys, I need some help in the "will it fit with spacers big enough to clear my BBK".

I have Maya STMs in: Front - 19x90 offset +30, Rear - 19x105 offset +29. That's what the label reads. Tape measure reads more like 10" and 11". I have the APRacing BBK currently, tried to put the fronts on, not enough caliper clearance. like a good 1/4" off. I also read a thread stating I'd need spacers so they'd fit flush with the fenders anyway.

I'm really bad with wheels and tires. Can someone tell me what spacers I would need to make these flush with my fenders on a 2011 370z base model? Hopefully that's enough clearance for my BBK.

Really appreciate it.
Jenova

19x90. That's insane! Lol

Sent from my SAMSUNG-SM-G900A using Tapatalk

JenovaI 09-28-2015 11:33 PM

Quote:

Originally Posted by jchammond (Post 3318830)
not sure about the brake clearance/but 10mm would put you @+20 front & 15mm would be +14 in rear,,,very close to flush...all pending tire size,camber,etc....
may could go 20mm in rear.
would be cool to have some loaners before making a purchase.

Thanks!

Aznjay83 09-30-2015 01:24 PM

can I run 20x9.5/11 et+5/+0 255/285 with stock camber or do I need to order front/rear camber kit. Will roll front/rear if needed!!

jchammond 09-30-2015 10:30 PM

Quote:

Originally Posted by Aznjay83 (Post 3319926)
can I run 20x9.5/11 et+5/+0 255/285 with stock camber or do I need to order front/rear camber kit. Will roll front/rear if needed!!

I know that's getting out there-Aznjay!
i'm sure another member is out there with rolled fender's.
A bit more imfo. would be helpful; 35,30,25 series tires/also brand (if known)
Ride height(stock,lowered 1" etc...) & Driving habits (normal street,track,both,etc...)
That's a very aggressive wheel offset.

Aznjay83 10-01-2015 05:31 AM

Quote:

Originally Posted by jchammond (Post 3320190)
I know that's getting out there-Aznjay!
i'm sure another member is out there with rolled fender's.
A bit more imfo. would be helpful; 35,30,25 series tires/also brand (if known)
Ride height(stock,lowered 1" etc...) & Driving habits (normal street,track,both,etc...)
That's a very aggressive wheel offset.

I'm going 245/35 and 285/30. I'll be on kw v3, normal driving and also it won't be my daily.

DRFTR 10-01-2015 03:38 PM

Looking at a set of G25s 20x10 +30 / 20x12 +20 , how aggressive? I have STANCE SS+ coils and SPL rear camber arms and toe bar. No camber adjustments up front. Also wanted to run 255/30-35 or 265/30-35 up front and 305/25-30 in rear. Will this fit with factory camber settings or is it fairly aggressive?

JerryDeluxe 10-05-2015 12:03 PM

Whats the best 20in wheel and tire combo for my sport Z on 19in rays

LMBmikeZ 10-05-2015 01:02 PM

Quote:

Originally Posted by JerryDeluxe (Post 3322802)
Whats the best 20in wheel and tire combo for my sport Z on 19in rays

Best to start with 19" wheels for those 19" rims :ugh2:

Also "the best" will be highly opinionated. What makes a rim "the best"?

Tires just get Michelin PSS and save yourself the headache.

AntiVenom 10-05-2015 01:06 PM

Quote:

Originally Posted by JerryDeluxe (Post 3322802)
Whats the best 20in wheel and tire combo for my sport Z on 19in rays

best is subjective. so tell us what your ultimate goal is.

20s with as much wide meaty tire as you can stuff under the fenders.

20s with hellaflush/stretched tires (note: i wonīt respond if this is your direction. :rofl2: no really i wouldnīt)

20s and you dont care how wide the tires are you just want a certain asthetic.

anyway you get my drift hopefully.

FPenvy 10-05-2015 01:14 PM

oh god please say hellaflush!!! I need to troll more today :stirthepot:

AntiVenom 10-05-2015 01:16 PM

Quote:

Originally Posted by DRFTR (Post 3320586)
Looking at a set of G25s 20x10 +30 / 20x12 +20 , how aggressive? I have STANCE SS+ coils and SPL rear camber arms and toe bar. No camber adjustments up front. Also wanted to run 255/30-35 or 265/30-35 up front and 305/25-30 in rear. Will this fit with factory camber settings or is it fairly aggressive?

should be doable although i think the 305 will look stretched on a 12" wheel. but if thatīs what you are going for then have no fear. daisuke149 ran that size wheel in the back but with a 325/25 and it didnīt rub.

here are some photos:
http://www.the370z.com/members-370z-...ml#post1118014

in some thread or another he mentioned that once he lowered it and added a bit of camber it actually didnīt poke any more. with factory camber youīd poke a bit (those photos give you an idea of how much).

JerryDeluxe 10-05-2015 02:18 PM

Only reason i wanna go 20s is because volk te37 19s are discontinued and 20s still available


All times are GMT -5. The time now is 08:40 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2