The "Will it fit?" thread

Z Runner · 04-11-2016, 05:59 PM

Quote:

Originally Posted by KamiSpeed

Advan doesnt make an 18x11.0 +12 its a +15. And yes that will fit the 370Z just fine.

Thanks

BlackZMamba · 04-13-2016, 12:53 AM

What about: 19 x 9.5 +20 Front, 19 x 11 +18 Rear?
Currently lowered on BC racing coilovers.

/Angelo350Z/ · 04-13-2016, 05:17 AM

Quote:

Originally Posted by BlackZMamba

What about: 19 x 9.5 +20 Front, 19 x 11 +18 Rear?
Currently lowered on BC racing coilovers.

19x9.5 +20 is fine, but 19x11 +18 is going to be a bit sunk in. I have 19x11 +15 with 305 tires and I'm running 5mm slip on spacers.

BigBen5.Oh · 04-13-2016, 02:58 PM

Have some 20x11+15 avant gardes for sale with tires

Ghost116 · 04-13-2016, 09:31 PM

U can run up to a 19x11 +5 I'm pretty sure. It think it was Moore speed that had it no rubbing.

/Angelo350Z/ · 04-22-2016, 03:53 AM

Quote:

Originally Posted by Ghost116

U can run up to a 19x11 +5 I'm pretty sure. It think it was Moore speed that had it no rubbing.

Correct. Generally, we can run 19x11 +5 wheels in the back as long as the tires are narrower than 305s. Based on my experience, 19x11+10 with 305s or 19x11 +5 with 295s work perfectly.

cranzy · 04-21-2016, 05:51 PM

Hi guys, I want to do autoX and ocasionally track days. For my wheel/tire set up, I am thinking of getting:

Enkei RPF1 Black (18x9.5) +15offset (5x114.3)
18x10.5 Enkei RPF1 (Black) Wheels/Rims 5x114.3 (37981056515BK) also +15 offset.

I want to Run r888s 275/35R18 99Y - front
295/30R18 98Y - rear

Can you please tell me if that's going to work especially for the front? I don't want to rub the fender. Thanks!

p.s. I currently have 20mm spacers all around but my current set up is stock sports rays with 245 front and 305s on the back.

SlyZGuy · 04-21-2016, 09:03 PM

Hey guys not trying to cut in on cranzys fitment question but also have a fitment question:

1. Will a 325/30 fit on a 10.5 rim?
2. I'm running 19x10.5et12 do you think I'll have rubbing issues? I have a spare set of rears et22 as well.

Car is on tein Springs with around 1.75 drop.

/Angelo350Z/ · 04-22-2016, 03:57 AM

Quote:

Originally Posted by SlyZGuy

Hey guys not trying to cut in on cranzys fitment question but also have a fitment question:

1. Will a 325/30 fit on a 10.5 rim?
2. I'm running 19x10.5et12 do you think I'll have rubbing issues? I have a spare set of rears et22 as well.

Car is on tein Springs with around 1.75 drop.

1. I wouldn't do that.
2. No rubbing issues with 19x10.5 +12 in the rear. 19X10.5 +22 in the rear will look sunk in without spacers.

clkio · 04-21-2016, 09:14 PM

You need a 12" rim for 325. The biggest you can do with 10.5 is 305

Sent from my Nexus 6P using Tapatalk

Drew303 · 05-02-2016, 03:26 PM

Quick will it fit question:

Looking at Nitto NT05R's. in the 19"s they come in a 305/35 will those fit stock nismo rims?

/Angelo350Z/ · 05-02-2016, 03:31 PM

Quote:

Originally Posted by Drew303

Quick will it fit question:

Looking at Nitto NT05R's. in the 19"s they come in a 305/35 will those fit stock nismo rims?

There are a few threads with pictures of 305 tires on OEM Rays. So yeah, they should fit the Nismo wheels.

clkio · 05-02-2016, 03:28 PM

I think the rear nismo are 10.5 so ya 305 should be good

Sent from my Nexus 6P using Tapatalk

Drew303 · 05-02-2016, 03:49 PM

Thanks

dylanmm · 05-17-2016, 02:24 AM

Hi guys,
Been looking at getting myself a set of Work VS-XX [not the step lip] - heard a few different things about different disk types... These are A Disk all round, I'm aware that I'll need a ~3mm spacer to clear on the rear, but haven't seen anything about fitment on the front?

Specs: 19x9 +25, 19x10 +25

Looking into new lips essentially making them 19x10+13 , 19x11.5+6 [OR] 19x11+13 (plus 3mm spacer). Don't mind rolling the guards, not planning on getting them pulled. Any estimates on the camber I'll need to run? ~ -2.5 front and back?
Thoughts? Cheers.

04-13-2016, 12:53 AM	#2 (permalink)
BlackZMamba Enthusiast Member Join Date: Oct 2012 Location: La Salle, IL Posts: 345 Drives: 2013 Z @ 321 whp Rep Power: 15	What about: 19 x 9.5 +20 Front, 19 x 11 +18 Rear? Currently lowered on BC racing coilovers. __________________ Mods: ECUtek \| Stillen \| Fujimura \| BC Racing \| SPC \| Avant Garde \| Fast Intentions \| Z1 Motorsports \| Akebono \| Cooper \| Redline \| Motul \| Mobil 1

04-21-2016, 09:03 PM	#8 (permalink)
SlyZGuy Base Member Join Date: Jan 2016 Location: Maryland Posts: 220 Drives: 2014 370z S/C M6 Rep Power: 11	Hey guys not trying to cut in on cranzys fitment question but also have a fitment question: 1. Will a 325/30 fit on a 10.5 rim? 2. I'm running 19x10.5et12 do you think I'll have rubbing issues? I have a spare set of rears et22 as well. Car is on tein Springs with around 1.75 drop. __________________ Stillen S/C \| '15 Nismo Conversion \| Aodhan \| Eibach \| Tokico \| SPC \| Z1 \| Evo-R \| Aerojacket \| HKS \| Berk \| CFE \| APR \| Amuse \| Z1 \| A2A IC \| AAM \| Buddy Club \|

05-17-2016, 02:24 AM	#15 (permalink)
dylanmm Base Member Join Date: May 2016 Location: Australia Posts: 1 Drives: Looking Rep Power: 11	Hi guys, Been looking at getting myself a set of Work VS-XX [not the step lip] - heard a few different things about different disk types... These are A Disk all round, I'm aware that I'll need a ~3mm spacer to clear on the rear, but haven't seen anything about fitment on the front? Specs: 19x9 +25, 19x10 +25 Looking into new lips essentially making them 19x10+13 , 19x11.5+6 [OR] 19x11+13 (plus 3mm spacer). Don't mind rolling the guards, not planning on getting them pulled. Any estimates on the camber I'll need to run? ~ -2.5 front and back? Thoughts? Cheers. Last edited by dylanmm; 05-17-2016 at 02:42 AM. Reason: Non-step lip

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official The370Z "Hot Girls with Hot cars" thread NSFW 01.01.09	AK370Z	Gentleman's Club	187	01-12-2011 01:24 AM
why did the thread "Sharing a bad experience with my 370Z" get closed?	TheSnakeJake	Nissan 370Z General Discussions	1	03-27-2010 12:35 AM
Why there isn't a "Monterey Blue"370Z thread?	Devil Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	08-24-2009 02:55 PM
Official "Guess the Stig's Time" Thread	ResIpsa	Nissan 370Z General Discussions	11	07-27-2009 10:45 PM
Official "Nissan 370Z spotted in Japan" Thread	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	120	05-01-2009 10:30 AM

04-13-2016, 02:58 PM	#4 (permalink)
BigBen5.Oh Base Member Join Date: Apr 2016 Location: So Cal Posts: 27 Drives: 2015 mustang GT Rep Power: 11	Have some 20x11+15 avant gardes for sale with tires

04-13-2016, 09:31 PM	#5 (permalink)
Ghost116 Base Member Join Date: Aug 2015 Location: Ontario Posts: 167 Drives: Up coming Rep Power: 369	U can run up to a 19x11 +5 I'm pretty sure. It think it was Moore speed that had it no rubbing.

04-21-2016, 05:51 PM	#7 (permalink)
cranzy Base Member Join Date: Mar 2015 Location: Seattle Posts: 108 Drives: 370z Rep Power: 12	Hi guys, I want to do autoX and ocasionally track days. For my wheel/tire set up, I am thinking of getting: Enkei RPF1 Black (18x9.5) +15offset (5x114.3) 18x10.5 Enkei RPF1 (Black) Wheels/Rims 5x114.3 (37981056515BK) also +15 offset. I want to Run r888s 275/35R18 99Y - front 295/30R18 98Y - rear Can you please tell me if that's going to work especially for the front? I don't want to rub the fender. Thanks! p.s. I currently have 20mm spacers all around but my current set up is stock sports rays with 245 front and 305s on the back.

04-21-2016, 09:14 PM	#10 (permalink)
clkio Enthusiast Member Join Date: May 2014 Location: Cambridge ON Posts: 265 Drives: 09 370z M6 Rep Power: 13	You need a 12" rim for 325. The biggest you can do with 10.5 is 305 Sent from my Nexus 6P using Tapatalk

05-02-2016, 03:26 PM	#11 (permalink)
Drew303 Base Member Join Date: Jan 2014 Location: Denver, Co Posts: 142 Drives: 2011 Turbo Nismo Rep Power: 13	Quick will it fit question: Looking at Nitto NT05R's. in the 19"s they come in a 305/35 will those fit stock nismo rims?

05-02-2016, 03:28 PM	#13 (permalink)
clkio Enthusiast Member Join Date: May 2014 Location: Cambridge ON Posts: 265 Drives: 09 370z M6 Rep Power: 13	I think the rear nismo are 10.5 so ya 305 should be good Sent from my Nexus 6P using Tapatalk

05-02-2016, 03:49 PM	#14 (permalink)
Drew303 Base Member Join Date: Jan 2014 Location: Denver, Co Posts: 142 Drives: 2011 Turbo Nismo Rep Power: 13	Thanks