Work Meisters S1 3P

sirnixalot · 01-22-2020, 02:07 PM

I got Work T5R 2 piece in the following sizes if it helps

19x10 +20mm offset A disk -1.75* camber up front
19x12 +20mm offset R disk -2.5* camber out back

I'm running tire sizes for a very different goal though, assuming you will be running a stretched tire setup. 285/35's rub up front on the bumper mounting tabs at my current ride height, the whoreish rear fender wells take every mm of the 325/30 without any clearance issues

justin_boy · 01-22-2020, 03:22 PM

Quote:

Originally Posted by sirnixalot

I got Work T5R 2 piece in the following sizes if it helps

19x10 +20mm offset A disk -1.75* camber up front
19x12 +20mm offset R disk -2.5* camber out back

I'm running tire sizes for a very different goal though, assuming you will be running a stretched tire setup. 285/35's rub up front on the bumper mounting tabs at my current ride height, the whoreish rear fender wells take every mm of the 325/30 without any clearance issues

Thats a beauty!

I actually dont plan on stretching much, Im planning on running 275/35's in the front with about -3.5~ camber and 315's in the rear with -3~ camber ish. All numbers are really loose until test fit time. I already cut off my bumper taps lol and Im rolling fronts as much as i can hopefully thhis weekend.

Mike_O_Nite · 01-22-2020, 11:28 PM

Quote:

Originally Posted by sirnixalot

I got Work T5R 2 piece in the following sizes if it helps

19x10 +20mm offset A disk -1.75* camber up front
19x12 +20mm offset R disk -2.5* camber out back

I'm running tire sizes for a very different goal though, assuming you will be running a stretched tire setup. 285/35's rub up front on the bumper mounting tabs at my current ride height, the whoreish rear fender wells take every mm of the 325/30 without any clearance issues

Did you have to roll your fenders?

I literally just ordered a set of these last week in a conservative (but not too wimpy, I hope) setup: 19x9.5 +15 and 19x11 +10

I wanted the Meisters, but I couldn’t justify the almost $4K (wanted the balls-out setup in Asterism black and gold bolts).

Any pics of your setup?

Apologies for the thread jack.

sirnixalot · 01-23-2020, 01:51 PM

Quote:

Originally Posted by Mike_O_Nite

Did you have to roll your fenders?

I literally just ordered a set of these last week in a conservative (but not too wimpy, I hope) setup: 19x9.5 +15 and 19x11 +10

I wanted the Meisters, but I couldn’t justify the almost $4K (wanted the balls-out setup in Asterism black and gold bolts).

Any pics of your setup?

Apologies for the thread jack.

I did not have to roll my fenders, but like I said it does rub on the front bumper to fender attachment points on bumps.

Also my apologies for thread jack

justin_boy · 01-23-2020, 03:45 PM

Quote:

Originally Posted by sirnixalot

I did not have to roll my fenders, but like I said it does rub on the front bumper to fender attachment points on bumps.

Also my apologies for thread jack

never apologize for such a beauty

justin_boy · 01-23-2020, 03:46 PM

Quote:

Originally Posted by Mike_O_Nite

Did you have to roll your fenders?

I literally just ordered a set of these last week in a conservative (but not too wimpy, I hope) setup: 19x9.5 +15 and 19x11 +10

I wanted the Meisters, but I couldn’t justify the almost $4K (wanted the balls-out setup in Asterism black and gold bolts).

Any pics of your setup?

Apologies for the thread jack.

haha we all learnin'

Mike_O_Nite · 01-23-2020, 03:58 PM

Quote:

Originally Posted by justin_boy

haha we all learnin'

Lol, yep...even this (me) wheel whore will never stop learning (5th set is on its way

).

I'm just playing it safe (or maybe too lazy to mess with the suspension/fenders, lol).

Congrats on your Meisters! I imagine my Emotion T5R 2Ps will be here around the same time, maybe even cross paths over in the Work factory, lol.

justin_boy · 01-24-2020, 02:14 PM

Quote:

Originally Posted by Mike_O_Nite

Lol, yep...even this (me) wheel whore will never stop learning (5th set is on its way

).

I'm just playing it safe (or maybe too lazy to mess with the suspension/fenders, lol).

Congrats on your Meisters! I imagine my Emotion T5R 2Ps will be here around the same time, maybe even cross paths over in the Work factory, lol.

Congrats to you too my man! I'ts always exciting....Im on my 3rd set of wheels in the past year only. This time I was like screw it, Im going aggressive and never looking back! now the fun part....lol

01-22-2020, 02:07 PM	#1 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57456	I got Work T5R 2 piece in the following sizes if it helps 19x10 +20mm offset A disk -1.75* camber up front 19x12 +20mm offset R disk -2.5* camber out back I'm running tire sizes for a very different goal though, assuming you will be running a stretched tire setup. 285/35's rub up front on the bumper mounting tabs at my current ride height, the whoreish rear fender wells take every mm of the 325/30 without any clearance issues Mike_O_Nite likes this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] fs or ft Work Meisters s1 3P	SR_GUY	Parts for sale (Private Classifieds)	4	04-18-2017 03:53 PM
[FOR SALE] Work Meisters for Sale	///PureSwank	Parts for sale (Private Classifieds)	7	09-15-2015 11:30 PM
[FOR SALE] Work Meisters S1 3P 19x10-2 and 19x11-7	CarbonFZ	Parts for sale (Private Classifieds)	29	02-25-2014 05:26 PM
19" Work Meisters (BLACK)	Holliday	Parts for sale (Private Classifieds)	25	02-16-2011 10:43 PM
WTB: Volk RE30s or Work Meisters	crazybeasty	Tires/Wheels	1	09-15-2010 03:43 PM