Work Meisters S1 3P

Originally Posted by vq37818

I have a 19x10.5 +17 (83mm lip) front and 19x11.5 +3 (130mm lip) rear. TX disk and A disk, respectively. Believe it or not, when you order through an authorized dealer, they need to order a “TX” disk to clear the wide front Akebonos. Work takes the Tdisk (biggest brake clearance) and machines the inside to clear our brakes. I have 255/35 and 275/35 Federal RSPROS which are notorious for running super wide and are effectively a 275/295.

Stock camber at -2.7 front/ -3.0 rear



With a “normal” 255/35 up front, you can run super low without modding your fender. Like this:


Hope this helps!

Originally Posted by justin_boy

You are a godsend! Thank you

These are the exact same specs, respectively



Wow thank you thank you thank you now I know exactly how it’ll sit



Now I’m worried about the tx face cause they didn’t say anything about that to me, Chris with vivid first wrote to them and they emailed back saying to get t face and a face

Originally Posted by vq37818

No worries brother.

I’m sure Work will provide you with the correct disk, assuming they know your car is a 370z with Akebonos.

Let me know if you need help with anything else.

Originally Posted by justin_boy

You are a godsend! Thank you
These are the exact same specs, respectively

Wow thank you thank you thank you now I know exactly how it’ll sit

Now I’m worried about the tx face cause they didn’t say anything about that to me, Chris with vivid first wrote to them and they emailed back saying to get t face and a face

Originally Posted by OptionZero

Call vivid and make sure
Do not assume
These are not cheap, make sure they get it right