Work Meisters S1 3P

justin_boy · 01-24-2020, 02:14 PM

Quote:

Originally Posted by Mike_O_Nite

Lol, yep...even this (me) wheel whore will never stop learning (5th set is on its way

).

I'm just playing it safe (or maybe too lazy to mess with the suspension/fenders, lol).

Congrats on your Meisters! I imagine my Emotion T5R 2Ps will be here around the same time, maybe even cross paths over in the Work factory, lol.

Congrats to you too my man! I'ts always exciting....Im on my 3rd set of wheels in the past year only. This time I was like screw it, Im going aggressive and never looking back! now the fun part....lol

vq37818 · 01-24-2020, 02:42 PM

I have a 19x10.5 +17 (83mm lip) front and 19x11.5 +3 (130mm lip) rear. TX disk and A disk, respectively. Believe it or not, when you order through an authorized dealer, they need to order a “TX” disk to clear the wide front Akebonos. Work takes the Tdisk (biggest brake clearance) and machines the inside to clear our brakes. I have 255/35 and 275/35 Federal RSPROS which are notorious for running super wide and are effectively a 275/295.

Stock camber at -2.7 front/ -3.0 rear

With a “normal” 255/35 up front, you can run super low without modding your fender. Like this:

Hope this helps!

justin_boy · 01-24-2020, 03:00 PM

Quote:

Originally Posted by vq37818

I have a 19x10.5 +17 (83mm lip) front and 19x11.5 +3 (130mm lip) rear. TX disk and A disk, respectively. Believe it or not, when you order through an authorized dealer, they need to order a “TX” disk to clear the wide front Akebonos. Work takes the Tdisk (biggest brake clearance) and machines the inside to clear our brakes. I have 255/35 and 275/35 Federal RSPROS which are notorious for running super wide and are effectively a 275/295.

Stock camber at -2.7 front/ -3.0 rear

With a “normal” 255/35 up front, you can run super low without modding your fender. Like this:

Hope this helps!

You are a godsend! Thank you
These are the exact same specs, respectively

Wow thank you thank you thank you now I know exactly how it’ll sit

Now I’m worried about the tx face cause they didn’t say anything about that to me, Chris with vivid first wrote to them and they emailed back saying to get t face and a face

vq37818 · 01-25-2020, 11:47 AM

Quote:

Originally Posted by justin_boy

You are a godsend! Thank you

These are the exact same specs, respectively

Wow thank you thank you thank you now I know exactly how it’ll sit

Now I’m worried about the tx face cause they didn’t say anything about that to me, Chris with vivid first wrote to them and they emailed back saying to get t face and a face

No worries brother.

I’m sure Work will provide you with the correct disk, assuming they know your car is a 370z with Akebonos.

Let me know if you need help with anything else.

OptionZero · 01-25-2020, 02:57 PM

Quote:

Originally Posted by justin_boy

You are a godsend! Thank you
These are the exact same specs, respectively

Wow thank you thank you thank you now I know exactly how it’ll sit

Now I’m worried about the tx face cause they didn’t say anything about that to me, Chris with vivid first wrote to them and they emailed back saying to get t face and a face

Call vivid and make sure
Do not assume
These are not cheap, make sure they get it right

justin_boy · 01-25-2020, 04:42 PM

Quote:

Originally Posted by OptionZero

Call vivid and make sure
Do not assume
These are not cheap, make sure they get it right

I called and made sure, and he told me he first emailed them and these are the faces that they confirmed fit, they put them on a red nismo ...also pure_q50 let me know the t face will clear the front brakes.....by like 2mm. I'm still worried tho

I just emailed work....lets see

justin_boy · 01-25-2020, 04:48 PM

Quote:

Originally Posted by vq37818

No worries brother.

I’m sure Work will provide you with the correct disk, assuming they know your car is a 370z with Akebonos.

Let me know if you need help with anything else.

Ugh I hope so....Option zero got in my head

I hope I can stuff some 275/35's and some 315/30's in there

justin_boy · 02-01-2020, 09:31 PM

okay guys they confirmed the tx face, thank you! really appreciate all of the help!

k67p67 · 02-09-2020, 02:39 PM

Can't remember if my fronts are TX disk. It rings a bell but my wheels have (T) stamped on them. Running 19.0"x10.0" +24 and 19.0"x11.0" +10 (A) with 265/35 and 305/30 Michelin PS4S. Front clearance is tight but it fits.

justin_boy · 02-09-2020, 04:27 PM

WOW .... drooling atm

sheet maybe i went to aggressive.. great

apparently tx face is just for works reference...and its for them to know its an akebono face. After 2013 work released that face for bbk's and the akebonos were on the list

OptionZero · 02-10-2020, 10:13 AM

It doesn’t look like that white car has had any adjustable components. His specs aren’t aggressive

justin_boy · 02-10-2020, 12:51 PM

Quote:

Originally Posted by OptionZero

It doesn’t look like that white car has had any adjustable components. His specs aren’t aggressive

phew...I dont want to run more than -3 in the front, and not much more in the rear. Maybe -3.5. But I also want alot of tire...

I was thinking 265/35 and 305/30 like you suggested...but the thing is I kept my flares on so even with rolling I still have less clearance

OptionZero · 02-10-2020, 01:24 PM

ditch the flares. the way the clip on impedes clearance
roll your fenders
relocate front bumper tab or shave it down
problem solved

OptionZero · 02-10-2020, 01:26 PM

19x10-2 and 19x11-7
clears BBK
with tires
225/35 and 235/35

owner: CarbonFZ

pretty sure at the time of that photo he was static and DID NOT have SPL arms

Zezus · 02-10-2020, 03:48 PM

Quote:

Originally Posted by OptionZero

19x10-2 and 19x11-7
clears BBK
with tires
225/35 and 235/35

owner: CarbonFZ

pretty sure at the time of that photo he was static and DID NOT have SPL arms

His back looks lower than the front. That would drive me bonkers. That is almost exactly how my car sat on those ark gts lowering springs.

01-24-2020, 02:42 PM	#17 (permalink)
vq37818 Base Member Join Date: Aug 2016 Location: Glendale Posts: 97 Drives: 19' 370z 6MT Rep Power: 8	Work Meisters S1 3P I have a 19x10.5 +17 (83mm lip) front and 19x11.5 +3 (130mm lip) rear. TX disk and A disk, respectively. Believe it or not, when you order through an authorized dealer, they need to order a “TX” disk to clear the wide front Akebonos. Work takes the Tdisk (biggest brake clearance) and machines the inside to clear our brakes. I have 255/35 and 275/35 Federal RSPROS which are notorious for running super wide and are effectively a 275/295. Stock camber at -2.7 front/ -3.0 rear With a “normal” 255/35 up front, you can run super low without modding your fender. Like this: Hope this helps! sunkist350z, Waiz, JARblue and 2 others like this. __________________ 2019 370z Sport 6MT \| Magnetic Black

02-01-2020, 09:31 PM	#23 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8366	okay guys they confirmed the tx face, thank you! really appreciate all of the help! vq37818 likes this.

02-09-2020, 02:39 PM	#24 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 290 Drives: 2017 Nismo Tech 6MT Rep Power: 3936	Can't remember if my fronts are TX disk. It rings a bell but my wheels have (T) stamped on them. Running 19.0"x10.0" +24 and 19.0"x11.0" +10 (A) with 265/35 and 305/30 Michelin PS4S. Front clearance is tight but it fits. sunkist350z, God-Speed, Mike_O_Nite and 1 others like this. __________________ 2017 370Z Nismo Tech 6MT Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square \| Hawk Performance \| Kanjo Spec.D \| Raceseng Last edited by k67p67; 02-09-2020 at 10:26 PM.

02-10-2020, 10:13 AM	#26 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,160 Drives: 15 370Z Nismo 6MT Rep Power: 203226	It doesn’t look like that white car has had any adjustable components. His specs aren’t aggressive __________________ OptionZero Build Thread

02-10-2020, 01:24 PM	#28 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,160 Drives: 15 370Z Nismo 6MT Rep Power: 203226	ditch the flares. the way the clip on impedes clearance roll your fenders relocate front bumper tab or shave it down problem solved __________________ OptionZero Build Thread

02-09-2020, 04:27 PM	#25 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8366	WOW .... drooling atm sheet maybe i went to aggressive.. great apparently tx face is just for works reference...and its for them to know its an akebono face. After 2013 work released that face for bbk's and the akebonos were on the list

02-10-2020, 01:26 PM	#29 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,160 Drives: 15 370Z Nismo 6MT Rep Power: 203226	19x10-2 and 19x11-7 clears BBK with tires 225/35 and 235/35 owner: CarbonFZ pretty sure at the time of that photo he was static and DID NOT have SPL arms __________________ OptionZero Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] fs or ft Work Meisters s1 3P	SR_GUY	Parts for sale (Private Classifieds)	4	04-18-2017 03:53 PM
[FOR SALE] Work Meisters for Sale	///PureSwank	Parts for sale (Private Classifieds)	7	09-15-2015 11:30 PM
[FOR SALE] Work Meisters S1 3P 19x10-2 and 19x11-7	CarbonFZ	Parts for sale (Private Classifieds)	29	02-25-2014 05:26 PM
19" Work Meisters (BLACK)	Holliday	Parts for sale (Private Classifieds)	25	02-16-2011 10:43 PM
WTB: Volk RE30s or Work Meisters	crazybeasty	Tires/Wheels	1	09-15-2010 03:43 PM