Anyone have a setup of 15mm spacers in front and 20 rear?

G35guy84 · 03-10-2010, 09:04 PM

Quote:

Originally Posted by Zultimate

New to the forum - directed here because i had a question about spacers on a different forum. I have a touring 370Z with the sport wheels and would like to install some spacers but will admit i don't know much about them. Feel like i know a little more after reading through this 11 page thread though.

I'd like to add some spacers but can't lower my car because of clearance issues getting into my driveway. It seems that most people are going with 20/25 spacers to get that flush look, which is what i want. Here's my question: I did a measurement using a weighted string on the fender lip and measured from the string to the edge of the tire. Both front and back measured approx. 9/16 in which is approx. 15mm. Big difference between 15 and 25mm. So, i guess you know my question. Are these spacers true to size? Not sure what size to go with at this point.

I didn't know too much about spacers until about a month ago, but I would think that since you're not lowering your Z you should go with 15mm front / 20mm rear spacers because you don't have the added negative camber to account for that you would with at set of springs/coilovers. I would imagine that 20mm/25mm spacers would cause the wheels (especially the rears) to stick out past the fenders, but I'm not certain since I've yet to see pics of a Z with spacers that's not lowered.

03Z33 · 03-13-2010, 07:42 PM

G35guy is correct, I was running 15mm front/20mm rear before lowering the car and it was a nice fit.
Now running 20mm front/25mm rear with Eibach springs and -1.8 deg camber all around on a base model with stock 18" wheel and tires. Using bolt on spacers.

Driftomodachi · 04-23-2014, 01:22 PM

Not a fan of extended studs and slip on spacers. Torque can stretch the bolts and create play and loose bolts. Bolt on spacers are safer and much more simple

Mr.Zbody · 05-23-2014, 01:14 PM

This thread has confused me a little not sure anymore of what spacer sizes will and won't work because of studs lol I Don't plan on dropping my Z (at least not anytime soon) but would like to add bolt on spacers. I have 13 Touring Sport Package with 19 Rays wheels. Can I run a square 20/20 setup at stock height and be flush all around? or do I have to do 15 up front to keep it flush at stock height?

NORAIN · 05-23-2014, 03:35 PM

You will be fine even if you lower some day and want bigger tires.

SoLif3Lik3 · 05-23-2014, 05:42 PM

Ok...now that my head is dizzy and spinning from reading all of this, I think this is the appropriate place to get a final answer since it has to do with correct size spacers.

I'm considering a set of aftermarket wheels that have lower offsets than the 19" RAYS but not low enough, at least in the rear. The fronts should be ok (going on the notion that an additional 15mm - 20mm up front is ideal) at 20x9 et30. That's 17mm less than stock putting me smack dab in between the 15 - 20 window. The rear is what will need a spacer. 20x10.5 et25. That's 11mm less than stock. If I add a 12mm bolt on spacer to the rear that will get me to 23mm which is smack dab in bewteen the 20-25 window for the rears.

This should be good, right?

20x9 et30 on 255/35/20
20x10.5 et13 on 285/30/20

Suspension = ARK GT-F springs (1.20f/1.0r)

04-23-2014, 01:22 PM	#168 (permalink)
Driftomodachi Enthusiast Member Join Date: Mar 2013 Location: Cerritos, CA Posts: 482 Drives: 2010 40th Rep Power: 13	Not a fan of extended studs and slip on spacers. Torque can stretch the bolts and create play and loose bolts. Bolt on spacers are safer and much more simple cooltoy likes this. __________________ 2010 40th Anniversary ll GT-R start button ll GT-R map lenses ll Plastidipped fangs and rear valence ll OEM foglight & switch ll Motordyne E370 Cat back ll Motordyne ART Pipes ll Takeda aFe Attack CAI ll Sprint Booster ll Z1 34 row Setrab oil cooler ll Z1 Motorsports M-Spec Shift Knob

05-23-2014, 03:35 PM	#170 (permalink)
NORAIN Enthusiast Member Join Date: Jun 2013 Location: Wilmington, NC Age: 56 Posts: 323 Drives: 2011 370Z 6M SP Rep Power: 11	You will be fine even if you lower some day and want bigger tires. __________________ Swift Springs\|265-305 RE-11\|Forgestar F14\|F.I. TDX S.S. 12" Res."Milled Out"\|K&N\|SPL\|Z1(34 row)oil cooler\|Z1 brake upgrade\|Hotchkis Zspeed\|Team Voodoo\|HPDEjunkie.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
15mm Spacer installed (Rear)	Minicobra1	Wheels & Tires	72	05-26-2011 10:40 PM
Front and rear valence group buy!	SpawnAeroJohn	Exterior & Interior	143	12-23-2009 01:28 AM
Parking sensors for rear/front?	jekel	Nissan 370Z General Discussions	9	07-29-2009 06:32 PM
Front and Rear Emblem?	cwj370	Exterior & Interior	16	05-02-2009 09:21 AM
Size of Front & Rear Emblems	mspeasl	Exterior & Interior	14	02-27-2009 05:22 PM

03-13-2010, 07:42 PM	#167 (permalink)
03Z33 Base Member Join Date: Oct 2009 Location: socal Posts: 232 Drives: BRZ Rep Power: 15	G35guy is correct, I was running 15mm front/20mm rear before lowering the car and it was a nice fit. Now running 20mm front/25mm rear with Eibach springs and -1.8 deg camber all around on a base model with stock 18" wheel and tires. Using bolt on spacers.

05-23-2014, 01:14 PM	#169 (permalink)
Mr.Zbody Base Member Join Date: Feb 2014 Location: Houston Posts: 14 Drives: 13 370Z GM M6 sport Rep Power: 11	This thread has confused me a little not sure anymore of what spacer sizes will and won't work because of studs lol I Don't plan on dropping my Z (at least not anytime soon) but would like to add bolt on spacers. I have 13 Touring Sport Package with 19 Rays wheels. Can I run a square 20/20 setup at stock height and be flush all around? or do I have to do 15 up front to keep it flush at stock height?

05-23-2014, 05:42 PM	#171 (permalink)
SoLif3Lik3 Base Member Join Date: Apr 2014 Location: Mill Creek, WA Posts: 75 Drives: '11 MINI Cooper S Rep Power: 10	Ok...now that my head is dizzy and spinning from reading all of this, I think this is the appropriate place to get a final answer since it has to do with correct size spacers. I'm considering a set of aftermarket wheels that have lower offsets than the 19" RAYS but not low enough, at least in the rear. The fronts should be ok (going on the notion that an additional 15mm - 20mm up front is ideal) at 20x9 et30. That's 17mm less than stock putting me smack dab in between the 15 - 20 window. The rear is what will need a spacer. 20x10.5 et25. That's 11mm less than stock. If I add a 12mm bolt on spacer to the rear that will get me to 23mm which is smack dab in bewteen the 20-25 window for the rears. This should be good, right? 20x9 et30 on 255/35/20 20x10.5 et13 on 285/30/20 Suspension = ARK GT-F springs (1.20f/1.0r)