ok i need help with tire size

jchammond

Heck; you're practically there!
you gotta get car on some level ramps or block's/that fit completely underneath the tire's.
Be sure its a level surface;as you will need to turn the front all the way to one side & then the other @ride height & with all the weight in car (including 19gals. gas)...get down low & get out the ruler & any kind of measuring piece (different width's of boards/blocks etc...)
measure up your pinch points on inner & outer...you gonna try & split the gap between inner part of rear fender & whatever is closest...and do the same on front (most likely upper control arm).
If you're in tight with your alignment guy-he may put it on the rack for you...just be sure you're measuring as if you are driving down the road.
You may be able to lose a little bit of that negative camber.
Good Luck!

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html