Help Newbie

piston671 · 02-22-2017, 07:35 AM

Hey guys. I saw a set of Ray Engineering Gram Lights 57getter rims. the fronts are 19x9.5 +25 rears and 19x10.5 +25 rears. Will this work on my Z. They did a test on the fronts and it stuck out the fenders. Installer said once I lowered the car, the wheels should tuck in. Right now they installed 245/40/19 on the front wheel and it looked stretched. Would going with a wider tire such as 255/40/19 take the stretch look away? Any advise is greatly appreciated.

OptionZero · 02-22-2017, 03:39 PM

Front are the exact same width rim and tire that factory uses. If you think that's "stretched", i dunno what to tell you.

Folks run 19x9.5 +22 all the time in front, its a conservative as hell fitment and won't be any problem. Wheels camber as the suspension settles. You can go up to a 255 wheel, i don't see any "need" to unless the "stretch" causes you to start sneezing uncontrollably.

This aversion to "stretch" is absurd, particularly here. Its the same fuc.king fitment as stock wheels.

The rears are sunk as hell.

Why do folks even buy sports cars? Sell your car and buy a civic si or something, jeez

CCastro · 02-22-2017, 03:50 PM

Hafa Adai! Search button! - The rears are going to be sunken, the front is fine...

piston671 · 02-22-2017, 04:32 PM

Quote:

Originally Posted by CCastro

Hafa Adai! Search button! - The rears are going to be sunken, the front is fine...

Hafa Adai!! Thanks for the advise.

kenchan · 02-22-2017, 07:48 PM

ET25's in those widths are for lowered 350Z/G35C..

@NT · 02-23-2017, 12:45 PM

Thats a pretty conservative fitment. A lot of people run the same specs.

kenchan · 02-23-2017, 06:12 PM

Quote:

Originally Posted by @NT

Thats a pretty conservative fitment. A lot of people run the same specs.

aka wrong fitment for 370Z

jchammond · 02-23-2017, 07:19 PM

1" staggered wheels are usually 10-13mm difference (example 19x9.5+25/19x10.5+12)
this will vary pending your camber setting's

jchammond · 02-23-2017, 07:19 PM

1" staggered wheels are usually 10-13mm difference (example 19x9.5+25/19x10.5+12)
this will vary pending your camber setting's

jchammond · 02-23-2017, 07:27 PM

Your front spacing is 4.25" on a 9.5+25 & your camber is probably stock @ -0.5 to -1.0,,,lowered will lean wheel inward more -1.5*,-2.0*....got to get adjustable upper control arms to dial it in.
Here's mine with stock -0.8* front camber on a 19x10+38,,,4" of front spacing- measured from mounting face out to wheel lip.

Sent from my iPhone using Tapatalk

piston671 · 02-24-2017, 09:46 AM

Quote:

Originally Posted by jchammond

Your front spacing is 4.25" on a 9.5+25 & your camber is probably stock @ -0.5 to -1.0,,,lowered will lean wheel inward more -1.5*,-2.0*....got to get adjustable upper control arms to dial it in.
Here's mine with stock -0.8* front camber on a 19x10+38,,,4" of front spacing- measured from mounting face out to wheel lip.

Sent from my iPhone using Tapatalk

Thanks for the tip!!

02-22-2017, 03:39 PM	#2 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	Front are the exact same width rim and tire that factory uses. If you think that's "stretched", i dunno what to tell you. Folks run 19x9.5 +22 all the time in front, its a conservative as hell fitment and won't be any problem. Wheels camber as the suspension settles. You can go up to a 255 wheel, i don't see any "need" to unless the "stretch" causes you to start sneezing uncontrollably. This aversion to "stretch" is absurd, particularly here. Its the same fuc.king fitment as stock wheels. The rears are sunk as hell. Why do folks even buy sports cars? Sell your car and buy a civic si or something, jeez Z-Girl 12 and piston671 like this. __________________ OptionZero Build Thread

02-22-2017, 03:50 PM	#3 (permalink)
CCastro Enthusiast Member Join Date: Sep 2010 Location: SF Posts: 300 Drives: 10 Nismo MB Rep Power: 14	Hafa Adai! Search button! - The rears are going to be sunken, the front is fine... piston671 likes this. Last edited by CCastro; 02-22-2017 at 03:53 PM.

02-22-2017, 07:48 PM	#5 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	ET25's in those widths are for lowered 350Z/G35C.. piston671 likes this.

02-23-2017, 12:45 PM	#6 (permalink)
@NT Base Member Join Date: Apr 2013 Location: Socal Posts: 135 Drives: 2013 370Z PW M6 Rep Power: 11	Thats a pretty conservative fitment. A lot of people run the same specs. piston671 likes this.

02-23-2017, 07:19 PM	#8 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	1" staggered wheels are usually 10-13mm difference (example 19x9.5+25/19x10.5+12) this will vary pending your camber setting's __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

02-23-2017, 07:19 PM	#9 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	1" staggered wheels are usually 10-13mm difference (example 19x9.5+25/19x10.5+12) this will vary pending your camber setting's __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

02-23-2017, 07:27 PM	#10 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Your front spacing is 4.25" on a 9.5+25 & your camber is probably stock @ -0.5 to -1.0,,,lowered will lean wheel inward more -1.5,-2.0....got to get adjustable upper control arms to dial it in. Here's mine with stock -0.8* front camber on a 19x10+38,,,4" of front spacing- measured from mounting face out to wheel lip. Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hello Newbie here..!!	Burton001	New Forum Member	4	03-09-2013 06:19 PM
Newbie	boomkapow!	New Forum Member	19	02-23-2012 09:39 AM
Newbie	Ilovejdm07	New Forum Member	7	12-07-2010 01:13 AM
First Z, Newbie	OOCRacing	Nissan 370Z General Discussions	13	10-25-2010 09:18 PM
newbie here!	VQinside	New 370Z Owner	14	10-20-2010 09:18 AM