First Arizona Thread....

[NickTurnon]

Originally Posted by Haboob

I saw a few 370's roll in to C&C Saturday, but as we were walking around I couldn't find the vehicles. Did y'all stay? Couple of white Z's, at least one Nismo, maybe two, I can't remember.



Then I found a 370Z (Silver) that lives (I think, could have been visiting) nearby off of Olive, near El Mirage - though I don't think that's anyone on here, is it?

Kev, constantly hoping theres someone else out there roaming around looking for other ZBros

[Haboob]

Originally Posted by NickTurnon

Kev, constantly hoping theres someone else out there roaming around looking for other ZBros

I live too far from you cool kids.

[GeauxTigers1]

Originally Posted by Haboob

I saw a few 370's roll in to C&C Saturday, but as we were walking around I couldn't find the vehicles. Did y'all stay? Couple of white Z's, at least one Nismo, maybe two, I can't remember.



Then I found a 370Z (Silver) that lives (I think, could have been visiting) nearby off of Olive, near El Mirage - though I don't think that's anyone on here, is it?

What's C&C? I was out at SCCA Solo at Wild Horse Raceway Saturday, is that it? Autocross was a blast and probably the most fun I've had in a car! Including my old boosted z's. Maybe I was the Nismo you saw if we are talking about the same event. Also, I'm out here in good ole Surprise

[Z Spec]

Originally Posted by GeauxTigers1

What's C&C?

Cars & Coffee on every third Saturday of the month in Scottsdale.

[Haboob]

Originally Posted by GeauxTigers1

What's C&C? I was out at SCCA Solo at Wild Horse Raceway Saturday, is that it? Autocross was a blast and probably the most fun I've had in a car! Including my old boosted z's. Maybe I was the Nismo you saw if we are talking about the same event. Also, I'm out here in good ole Surprise

Originally Posted by Z Spec

Cars & Coffee on every third Saturday of the month in Scottsdale.

Cars & Coffee. It's every first Saturday of the month at Scottsdale Rd and Doubletree Ranch Blvd (the Gainey Ranch area).

The one that's the third Saturday of the month is Penske, and I went once and it was a bust. Haven't been back since.

[GeauxTigers1]

Originally Posted by Haboob

Cars & Coffee. It's every first Saturday of the month at Scottsdale Rd and Doubletree Ranch Blvd (the Gainey Ranch area).

The one that's the third Saturday of the month is Penske, and I went once and it was a bust. Haven't been back since.

alrighty so that wasn't me! LOL Might have to try to make it by one of these days. What time does it start?

[louiey370z]

Anyone here own a yellow 370z by any chance? saw one parked outside by dollar tree and safeway on flw

[GeauxTigers1]

Anybody have any experience with DynoComp in Scottsdale? Went to get an estimate from the guy for the FI twin turbo install, along with clutch/flywheel, e85 fuel system, and exhaust. First they don't call me back when trying to schedule a consult, so I call a week later and get a time. He was great to talk to in person, but then doesn't send my estimate over. Call after a week and claims they sent it, so they resend. I get it and it's missing all sorts of stuff. PLUS $2k upcharge for the kit...i guess for him ordering it for me? I call him out on it, and just politely asked why the kit was $12k, and then never do I hear from them again. Makes me not even want to do maintenance there. Anybody have a great shop recommendation in the valley? I'm in the west Valley so closer to there would be best. Preferably with a Dyno. Thanks!

[conor1123]

First of all, call FI directly and deal with them (assuming you are talking about Fast Intentions). I don't think DynoComp even has any connections with them in the first place. You will be waiting 3-5months for the FI kit to be build since they are built to order. Depending on the upgrades you can easily spend 12k-14k on the kit itself. That isn't even including a clutch. I priced out my build at around 18k just to get it rolling, that isn't including any labor. You could probably do it for around 16-17k without labor. If you want it done right without worry, id bring it to FI directly or SpecialtyZ. SpecialtyZ will install the kit for around 3.5k.

UMS would probably get it done right if you want to stay here in AZ. Just make a trip out to Cali

Originally Posted by GeauxTigers1

Anybody have any experience with DynoComp in Scottsdale? Went to get an estimate from the guy for the FI twin turbo install, along with clutch/flywheel, e85 fuel system, and exhaust. First they don't call me back when trying to schedule a consult, so I call a week later and get a time. He was great to talk to in person, but then doesn't send my estimate over. Call after a week and claims they sent it, so they resend. I get it and it's missing all sorts of stuff. PLUS $2k upcharge for the kit...i guess for him ordering it for me? I call him out on it, and just politely asked why the kit was $12k, and then never do I hear from them again. Makes me not even want to do maintenance there. Anybody have a great shop recommendation in the valley? I'm in the west Valley so closer to there would be best. Preferably with a Dyno. Thanks!

[Hotrodz]

Dude just take the car to SpecialtyZ...you will get it done right witb everything you need for 15 to 17k. It just depends on what up grades you want. Really you would be foolish, take it to anyone who has not installed the kit before.

[GeauxTigers1]

Originally Posted by conor1123

First of all, call FI directly and deal with them (assuming you are talking about Fast Intentions). I don't think DynoComp even has any connections with them in the first place. You will be waiting 3-5months for the FI kit to be build since they are built to order. Depending on the upgrades you can easily spend 12k-14k on the kit itself. That isn't even including a clutch. I priced out my build at around 18k just to get it rolling, that isn't including any labor. You could probably do it for around 16-17k without labor. If you want it done right without worry, id bring it to FI directly or SpecialtyZ. SpecialtyZ will install the kit for around 3.5k.

UMS would probably get it done right if you want to stay here in AZ. Just make a trip out to Cali

Originally Posted by Hotrodz

Dude just take the car to SpecialtyZ...you will get it done right witb everything you need for 15 to 17k. It just depends on what up grades you want. Really you would be foolish, take it to anyone who has not installed the kit before.

Already on it! Been talking to Kevin for a while, but was wondering about a good shop for the easy maintenance down the road. Can't take it to Cali everytime I need to do something! HOWEVER, Calling on Tuesday to officially order! Gnna drive to Cali when it's done, fly back, then fly there and take her home! AHHH! Gonna be closer to $22k tho, hang out I'll see if I can find the estimate. Getting a bit of work done other than just the kit.

[GeauxTigers1]

Here it IS! Looks pretty good to me, I don't think there giving any of a discount for doing it all with them, but they are pretty busy as is and people keep lining up for the kit. I feel like I'd rather pay a little more and have the masterminds that designed the kit install it for me This isn't including the Defi Gauges and POD I want so that's why I'm thinking a little closer to $22k. I want 3; boost, exhaust temp, and air/fuel on the driver side pillar. Sounds like the pod would have to be custom made by one of their guys.

[conor1123]

Dude nice! Good thing you got ahold of Kevin! They will square you away and take care of you! So jealous hah! I was getting ready to do this soon but I'm going to build an s2000 track car since everything is cheaper lol.

[NickTurnon]

UMS or Goodspeed will take care of you -

I haven't heard very good things about DynoComp

[conor1123]

Originally Posted by NickTurnon

UMS or Goodspeed will take care of you -

I haven't heard very good things about DynoComp

Agreed!