GTM Stage 1 Super Charger Install -Initial Start Up

kentmo280z · 01-02-2015, 10:25 PM

I'm just about finished with my Stage 1 SC build, but I was not able to obtain ECU Flash files from GTM. Wondering if I can get advice as to what I need to do to the ECU before I do the initial start? I'm not versed on tuning so I don't know if I can start the vehicle without a flash or is there a download that I can find either through this forum or online somewhere???
Kent

brutusvk · 01-02-2015, 10:51 PM

You need uprev software and a tuner.

Staples · 01-02-2015, 11:31 PM

Quote:

Originally Posted by kentmo280z

I'm just about finished with my Stage 1 SC build, but I was not able to obtain ECU Flash files from GTM. Wondering if I can get advice as to what I need to do to the ECU before I do the initial start? I'm not versed on tuning so I don't know if I can start the vehicle without a flash or is there a download that I can find either through this forum or online somewhere???
Kent

Do you have the UpRev cable?

kentmo280z · 01-03-2015, 05:06 AM

I forgot to mention that I do have a cable. I also have a tuner who has uprev.
I want to find out if i can start the car and drive it ( break it in) b4 I have a tune done, or do I need to down load info onto my ECU. My SC install instructions asks that I aquire a flash from GTM b4 initial start up.

Zat_Zuma · 01-03-2015, 09:19 AM

Still don't have the GTM stage 1 file? Ishould have it in my files somewhere.

Zat_Zuma · 01-03-2015, 09:25 AM

PM sent

Chuck33079 · 01-03-2015, 09:39 AM

Quote:

Originally Posted by kentmo280z

I forgot to mention that I do have a cable. I also have a tuner who has uprev.
I want to find out if i can start the car and drive it ( break it in) b4 I have a tune done, or do I need to down load info onto my ECU. My SC install instructions asks that I aquire a flash from GTM b4 initial start up.

If it starts at all without a base map, it'll run badly since it expects much smaller injectors.

kentmo280z · 01-03-2015, 11:08 PM

Thanks to a member here I obtained the ROM files!

Lo and behold... Sam called me today also...

ANMVQ · 01-30-2015, 07:38 AM

?? Were are we man , Looking for a vid is

kentmo280z · 01-30-2015, 11:21 AM

Quote:

Originally Posted by ANMVQ

?? Were are we man , Looking for a vid is

Well, it's dead of winter here in lovely Ohio. So, not much driving right now. I do take the car out when the roads are dry enough. Car runs really well, and no problems so far! Me likem' boooost!! Check out my : "Confuscious Say" post on the Forced Induction page.... lol
I'm waiting on FI resonated test pipes delivery and then I'll take the car in for the TUNE!
Vids at that time!!!

ANMVQ · 01-30-2015, 12:50 PM

Ah ok. Dead of winter 30+ inches of snow here also, Maybe thought about a garage start up , but with out a tune I don't blame you.

kentmo280z · 01-30-2015, 01:53 PM

Quote:

Originally Posted by ANMVQ

Ah ok. Dead of winter 30+ inches of snow here also, Maybe thought about a garage start up , but with out a tune I don't blame you.

I got a tune from GTM and downloaded it, car runs very well. Not digging the BOV noise when accelerating easily. It makes a noise kinda like "chedda chedda chedda".. There is an adjustment that can be done to the valve to lessen the noise, so I've read...
I can feel the torque difference with the SC and with the FI cat backs, it sounds great. Like the scream the exhaust makes when gettin on it!

ANMVQ · 02-02-2015, 09:47 AM

that almost sounds like a boost leak, either that or flutter, I know I had to adjust my turbosmart BPV when I swapped out the Stillen stock one.

kentmo280z · 02-02-2015, 01:38 PM

Quote:

Originally Posted by ANMVQ

that almost sounds like a boost leak, either that or flutter, I know I had to adjust my turbosmart BPV when I swapped out the Stillen stock one.

I'm thinking it's the BOV also. I'll do some adjusting when I tear the bumper off at Tune time!
I tried to upload a start up video... beyond my capabilities.... It's on you tube under "Whoooooosh"
and another video under "startup" They're not very impressive...lol
kent eckman is my youtube I.D.

FPenvy · 02-02-2015, 01:48 PM

01-02-2015, 10:25 PM	#1 (permalink)
kentmo280z Base Member Join Date: Sep 2014 Location: Akron , Ohio Posts: 199 Drives: '10 370Z Roadster Rep Power: 11	GTM Stage 1 Super Charger Install -Initial Start Up I'm just about finished with my Stage 1 SC build, but I was not able to obtain ECU Flash files from GTM. Wondering if I can get advice as to what I need to do to the ECU before I do the initial start? I'm not versed on tuning so I don't know if I can start the vehicle without a flash or is there a download that I can find either through this forum or online somewhere??? Kent ANMVQ likes this.

01-03-2015, 09:19 AM	#5 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	Still don't have the GTM stage 1 file? Ishould have it in my files somewhere. __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

01-03-2015, 09:25 AM	#6 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	PM sent cdoxp800 and kentmo280z like this. __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

01-30-2015, 07:38 AM	#9 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 20	?? Were are we man , Looking for a vid is __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

01-30-2015, 12:50 PM	#11 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 20	Ah ok. Dead of winter 30+ inches of snow here also, Maybe thought about a garage start up , but with out a tune I don't blame you. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

01-02-2015, 10:51 PM	#2 (permalink)
brutusvk Base Member Join Date: May 2014 Location: Az Posts: 220 Drives: 2014 sport package Rep Power: 12	You need uprev software and a tuner.

01-03-2015, 05:06 AM	#4 (permalink)
kentmo280z Base Member Join Date: Sep 2014 Location: Akron , Ohio Posts: 199 Drives: '10 370Z Roadster Rep Power: 11	I forgot to mention that I do have a cable. I also have a tuner who has uprev. I want to find out if i can start the car and drive it ( break it in) b4 I have a tune done, or do I need to down load info onto my ECU. My SC install instructions asks that I aquire a flash from GTM b4 initial start up.

01-03-2015, 11:08 PM	#8 (permalink)
kentmo280z Base Member Join Date: Sep 2014 Location: Akron , Ohio Posts: 199 Drives: '10 370Z Roadster Rep Power: 11	Thanks to a member here I obtained the ROM files! Lo and behold... Sam called me today also...

02-02-2015, 09:47 AM	#13 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 20	that almost sounds like a boost leak, either that or flutter, I know I had to adjust my turbosmart BPV when I swapped out the Stillen stock one. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can you get to 400 without turbo or super-charger	Q_USAF	Engine & Drivetrain	193	03-15-2023 02:18 PM
GTM Stage 1 Super Charger Install--Kentmo	kentmo280z	Forced Induction	66	05-19-2015 06:09 PM
[WTB] Stillen super charger or GTM	ocean.mirage	Parts for sale (Private Classifieds)	3	05-09-2013 12:15 AM
Super charger flutter	Mrbiker	Forced Induction	6	10-05-2011 06:59 PM
Tsb: All nissan models; remanufactured engine lubrication upon initial start up	AK370Z	370Z Technical Service Bulletins (TSB) / Recalls	0	02-08-2010 10:30 PM