Motion Lab Tuned 2014 NISMO 303WHP/253WTQ Solid gains through-out the RPM range!

Motion Lab · 10-31-2014, 01:53 PM

Quote:

Originally Posted by jwick

Ah....guess that was English

Lol sorry sometimes it can be difficult to figure out a way to explain it without using all the jargon that comes along with chassis dyno. Essentially we are using a eddy brake to apply additional load through-out the dyno pull versus depending on the inertia of the rollers to provide resistance. This type of testing usually works best on small roller dynos.

Quote:

Originally Posted by ANMVQ

Peak Torque at RPM: 253Wtq @ 3800 RPMs
Nice and early great job Alex, now I know why mine pulls so hard down low.

As always thank you for your support Mike! Yeah I think Todd sent you a recent revision shortly after finishing this car up and spending a good amount of time on the VVEL tuning down low. That is much easier to dial in on the dyno versus looking at remote logs. Glad you are enjoying your tune!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Motion Lab Tuned Nismo 484whp/400wtq @ 12.5psi w/ Vortech impeller on the Stillen S/C	Motion Lab	Tuning	39	09-02-2016 11:45 AM
Motion Lab Tuned 2012 Nismo 321WHP/289WTQ Berk Tech, AAM, and Stillen N/A power	Motion Lab	Tuning	19	12-18-2013 04:27 PM
Motion Lab Tuned 2011 Nismo 460whp/380wtq Stillen and DW making power!	Motion Lab	Tuning	5	02-25-2013 11:47 AM
GReddy Twin Turbo 2011 Nismo installed and tuned @ Motion Lab	Motion Lab	Forced Induction	9	01-28-2013 09:40 AM
Motion Lab Tuned 2011 Nismo GReddy Twin turbo 440whp/339wtq @ 5.5psi	Motion Lab	Tuning	8	07-26-2012 12:09 PM