A good tune needs to include both dyno and street tuning, since there's so much more to it than just tuning wot on the dyno. I'm just trying to get an idea of the total cash outlay.

Edit now that I'm not trying to type on my phone- I'm not a huge fan of tuning WOT/ full bore pulls on the street. That's more for on/off throttle, part throttle, etc. I'd prefer to have the high speed stuff done on a dyno. Plus, I want all the printouts- power, boost/afr, etc. The butt dyno is often a liar. If I'm going to drop the coin to switch software, I'd like to be able to look at it and say "this is X more power at Y rpm".

Well, you could always do the street tuning yourself with the rented cable to save Joe some time. Get a base tune from him, log some data, then bring the car and data to him. He won't have to spend as much time driving it on the street before additional dyno tuning. Obviously, you'll have to pony up for the dyno and his time, which I can understand why you'd be hesitant with the limited results out there and having already paid for a different tuning software. But doing some datalogging yourself would probably save a little bit of money.

software itself is around 1500-1600.

We are trying to keep this to qualified shops. No I'm not being snobbish, but you wouldn't take your baby to just anyone would you? We would prefer to work with established shops, with qualified tuners for two reasons; to protect the integrity of the product, and to expand the knowledge base on this platform.

Let me explain that a bit better;

First, as a Master tuner, I am answerable to not only you, as the end customer, but to EcuTek as well. So if we hand out the software to JimBob down at the gas station and he proceeds to talk someone into a tune, and melts a piston or two, guess who gets the call from the pissed customer?

Second, and I know this might be a shock to hear a tuner admit this, but we don't know everything there is to know about this platform. There are guys out there with a deeper knowledge of the 370, and that's the truth. I'm damn good at what I do, that's why I'm one of a very select group of "master" tuners, but the simple fact is I learn something new EVERY day. We like to work with shops that we can learn from, and in turn they learn from us. This is what I mean when I refer to expanding the knowledge base

I you happen to have a shop in mind, let me know, I'm happy to work with any qualified shop in the world. We could talk to them directly, and show them the software. Hell you might even get a free calibration from them for bringing it to their attention!

I'm trying to avoid doing too much running around on a base tune since it's FI. There's a lot more to go wrong. In the past when I've had other vehicles tuned, we started on the dyno to get it mostly dialed in, and then moved it to the street for polishing.

Oh, I'm completely ok with not letting everybody with a lift and a set of tools become a "tuner".

Rather than type out a novel here, I'll just get to the point. I'm looking for a total drive-out cost to come to your shop, dyno tune it, touch it up on the street and go home with the cable. I'll be scheduling it right after I see that Ecutek has added the boost control functionality to the software.

completely agree with you. I see a huge amount of shops "tuning" on the dyno, and not paying any attention to the drive characteristics of the car. so what you end up with is a car that makes a sh#t load of power, but stalls, farts, and makes the driver look like an idiot. Not much fun to drive in short.

I would much rather give up 1-2% on the top end to have a well rounded car that has factory like transitions.

Now all that said, you CAN get 95-96% of everything available with drive cycle tuning and data logs, BEFORE you ever strap the car to a chassis dyno. And that's coming from a guy that owns two 50K$ dynos.

I enjoy working on the dyno, and have 25+ years in this business. But not everyone wants or needs the last 4-5% that you get from the extra money spent on the rollers.

Those of you that have blood sweat and cubic dollars in your car, yes I understand. Trust me I understand. My Mazda 6 World Challenge car spends about 1/3 of its life on the dyno trying new stuff

Give me a call, or PM me and we can work something out for you. Fair enough?

pm'd

so is it 1500-1600 for everything i would need to tune my car myself? i dont let other people tune my car... that sounds like a great way to end up with a blown engine :) i just want to buy what i need to never have to rely on anybody else for getting my tune completed.

if you qualify as a dealer the cost is ~1500-1600 plus hardware and license per car.

There is no end-user version of the software, sorry

what are the dealer qualifications?

Have a shop? What type dyno does your shop own?Tune now? What platforms?

Had a shop, sold the dynojet, only tune my cars now. I am in the manufacturing industry now. I just want to tune my own car, not interested in any other platforms or anything like that. Just 1 car, the one I drive.

is it normal that i did not received a conformation email that the kit has been shipped?

No, that's not normal. Did you receive the instruction email?