car wont start after attempting to program ecu with hypertech

DEpointfive0 · 02-19-2013, 12:22 PM

Quote:

Originally Posted by Motion Lab

The ECU is stuck in flash mode. Ask if hypertech can repair ECU's that are stuck in flash mode. If there is no way to recover, you will unfortunately have to simply replace the ECU. We have had similar issues with the older Cobb accessports on the 350z's. Luckily Cobb tuning has been able to recover the ECU's that we have had failures with, but since they never supported the 370z platform they wont be able to help.

Good luck with your issue!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

Hey Alex, Cobb DID make an AccessPort for the 370Z, ONLY for the 2009.
Cobb/UpRev still might be able to help because they both still work on 370's in TX

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z wont start no power . Where to start	acracing118	Exterior & Interior	6	01-05-2013 06:37 PM
Car wont start, fuel pump 400?!	A 2 Z	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	4	09-05-2012 03:07 PM
HYPERTECH programmed great, then car no start	TPrelude-370z	Engine & Drivetrain	19	06-21-2012 06:39 PM
HYPERTECH programmed great, then car no start	TPrelude-370z	Tuning	14	06-20-2012 12:35 PM
Car wont start	faijia	Nissan 370Z General Discussions	4	06-14-2009 11:37 PM