2 Step tuning with Uprev

wstar

Mine still has the funny delay behavior, even with the latest updates. It may be a 7AT-specific thing. I haven't even tried this launch mode (I have no use for it), but a typical example scenario:

I'm parked in my rev/speed-limit map (it's limited down to like 2.5K and 2mph - anti-theft to leave the car running for a sec). I pull out of the spot and start crossing the gas station. I immediately notice the low limits, so while rolling I switch to the unlimited map (or alternatively: come to a stop at the edge of the street I'm about to pull out onto, and switch maps while in neutral). Either way, pull out onto the street and it starts to take off, gets well past my limited map's low rpm/mph thresholds, then rev limits itself at something stupid like 4-5K and refuses to accelerate further on upshift. Then I pull off into the next parking lot, put the car in park, re-apply the map, sit there for ~15 seconds, pull out, and everything's fine. I haven't really tried to debug the issue further, I just avoid switching without waiting in park a bit (except on the rare occasions that I forget...).

__________________
7AT Track Car!
Journal thread / Car setup details