Smooth Throttle for UpRev

j-rho · 04-09-2015, 12:51 AM

This is a pretty amazing thread, thanks to everyone involved for your contributions to the community.

I had a question regarding lift-throttle behavior, specifically if anybody has found a way to influence it.

To see what I mean, cruise down the freeway, lay into full throttle for a second (don't really have to be going fast), look down at the shifter, then quickly lift off the gas. At least in my car, the shifter stays where it is for about half a second, then moves to the side, indicating the engine is now providing counter-torque. I'd like to see it move in sync with the pedal coming up off the floor.

That half second or so I believe is related to "rev hang" and a means of reducing NOx emissions caused by rapid throttle closure.

The problem for me is I autocross, and we often have to move the car through some rapid-fire elements which require coordination of steering and throttle. The delay in throttle response on lift, makes this much more difficult and inconsistent.

I'm fine with the way things go as the pedal is going down, but I'd like it to follow my movements on the way back up a lot better. Do these throttle maps influence this at all?

Thanks for reading, and in advance for the help!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z FI Throttle Response: Boost vs. Throttle Position	DIGItonium	Forced Induction	9	01-23-2011 08:49 PM
Adjusting Throttle Response with UpRev?	AlphaSnacks	Tuning	4	12-05-2010 03:40 AM
2nd gear not as smooth as the others???	VQinside	Engine & Drivetrain	14	11-03-2010 09:22 PM
UpRev Osiris/Technosquare users- throttle mapping?	SE	Tuning	3	08-29-2010 05:03 PM
Smooth launch in 1st Gear?	BrianMSmith	Nissan 370Z General Discussions	22	03-26-2010 10:40 PM

04-09-2015, 12:51 AM	#11 (permalink)
j-rho Base Member Join Date: Jul 2014 Location: San Diego Posts: 154 Drives: 1967 Camaro Z28 Rep Power: 12	This is a pretty amazing thread, thanks to everyone involved for your contributions to the community. I had a question regarding lift-throttle behavior, specifically if anybody has found a way to influence it. To see what I mean, cruise down the freeway, lay into full throttle for a second (don't really have to be going fast), look down at the shifter, then quickly lift off the gas. At least in my car, the shifter stays where it is for about half a second, then moves to the side, indicating the engine is now providing counter-torque. I'd like to see it move in sync with the pedal coming up off the floor. That half second or so I believe is related to "rev hang" and a means of reducing NOx emissions caused by rapid throttle closure. The problem for me is I autocross, and we often have to move the car through some rapid-fire elements which require coordination of steering and throttle. The delay in throttle response on lift, makes this much more difficult and inconsistent. I'm fine with the way things go as the pedal is going down, but I'd like it to follow my movements on the way back up a lot better. Do these throttle maps influence this at all? Thanks for reading, and in advance for the help!