What maps is everyone with an UpRev tune running?

Vince@R/T · 04-08-2011, 03:16 PM

I usually do 5 maps as follows....

1- 93 Octane
2- 91 octane
3- Valet
4- Anti Theft
5- Stock

Most people are pretty happy with that set up. 5 maps is more then what ya typically need and I leave MAP 5 stock just to have that option...

Pete370Z · 04-08-2011, 04:41 PM

Quote:

Originally Posted by Vince@R/T

I usually do 5 maps as follows....

1- 93 Octane
2- 91 octane
3- Valet
4- Anti Theft
5- Stock

Most people are pretty happy with that set up. 5 maps is more then what ya typically need and I leave MAP 5 stock just to have that option...

So if someone might have to go in to the dealership for warranty work would they just switch to the stock map or would the ECU have to be re-flashed? (I'm assuming you're a tuner) How do you feel about an economy class or a lower octane class? Also, what settings do you usually do on different maps? (redline, idle, anything else I might have to specify?)

Vince@R/T · 04-08-2011, 06:38 PM

Quote:

Originally Posted by Pete370Z

So if someone might have to go in to the dealership for warranty work would they just switch to the stock map or would the ECU have to be re-flashed? (I'm assuming you're a tuner) How do you feel about an economy class or a lower octane class? Also, what settings do you usually do on different maps? (redline, idle, anything else I might have to specify?)

Hey Pete, I do have some guys ask for a lower octane map and we can do that as well. I don't advise it cause these motors are still high comp for a factory motor. As far as the dealer is concern they can look at the map but chances are at the dealer level that they wouldn't be able to tell what was changed. However if there was an issue that the dealer or rep had to look into the ECU, they can tell how many times it has been flashed..

Redline I usually do 7800, idle i set at 850...and then just trim in timing and fuel...

CZero · 04-24-2011, 05:29 PM

Quote:

Originally Posted by Vince@R/T

Hey Pete, I do have some guys ask for a lower octane map and we can do that as well. I don't advise it cause these motors are still high comp for a factory motor. As far as the dealer is concern they can look at the map but chances are at the dealer level that they wouldn't be able to tell what was changed. However if there was an issue that the dealer or rep had to look into the ECU, they can tell how many times it has been flashed..

Redline I usually do 7800, idle i set at 850...and then just trim in timing and fuel...

Does the engine still make good power at 7800?
Also, has anyone revved the engine up high enough to start getting valve float? Just curious what all we can do with the VQ37.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UpRev Tune results	Diocletian	Tuning	38	05-06-2011 11:37 AM
UpRev tune... Changing maps?	SM5654	Tuning	36	04-29-2011 10:17 AM
Looking to do an Uprev Tune	Zeto	North East Region	12	07-12-2010 04:04 PM
Uprev Tune Issue	LateralG'z	Tuning	1	05-04-2010 06:24 AM
Uprev Tune	jpit	Tuning	10	01-13-2010 06:23 PM

04-08-2011, 03:16 PM	#1 (permalink)
Vince@R/T Base Member Join Date: Mar 2011 Location: Lansdale PA Posts: 87 Drives: 99 GS400 Rep Power: 16	I usually do 5 maps as follows.... 1- 93 Octane 2- 91 octane 3- Valet 4- Anti Theft 5- Stock Most people are pretty happy with that set up. 5 maps is more then what ya typically need and I leave MAP 5 stock just to have that option...