Check my Dyno results, seems LOW?

jchammond · 08-20-2017, 06:47 AM

Quote:

Originally Posted by SG4247

They probbly know this. They just want to play it safe and not hurt your engine.

Unsure how they do it at other locations; but I had to sign a waiver,giving permission & I was responsible if an internal engine failure occurred.
As mine had around 65k at the time of tuning (May 2016) and currently has 85k on it.
After the tune; everything was much more responsive & if tire's broke loose in 1st or 2nd...gotta pay attention to shifts/ as mine has bounced off the rev limiter numerous times.

TreeSemdyZee · 08-20-2017, 10:25 PM

Just because a shop has a dyno doesn't mean they know how to use it.
There are so many hack shops in this part of the world and it's probably no different where you are.

shadow85 · 08-21-2017, 01:54 AM

Hmm yeah fair enough. Yeah I had some members from Zclub Australia send me their dyno sheets for the stock Z, and they all showed around 190-200 rwkw (260-270whp) even on multiple and different kinds of dynos.

So yeah, I believe my reading was definitly not fully accurate and true.

shadow85 · 05-18-2019, 05:50 PM

All good, I was on a low timing MAP. Had a higher timing MAP activated and ran 1 more psi and got very good results!

08-20-2017, 10:25 PM	#17 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,883 Drives: '09 370 & ‘14 Juke Rep Power: 27408	Just because a shop has a dyno doesn't mean they know how to use it. There are so many hack shops in this part of the world and it's probably no different where you are. __________________ Borla S-Type \| Motordyne \| Z1 (lots) \| South Bend \| K&N \| Nismo/Nismo S-Tune \| Eibach \| Aerojacket \| Fujimara \| Spl \| ZSpeed Performance \| Kenwood-Infinity-Sound Ordnance \| Whiteline \| Ecutek \| Hotchkis \| Clazzio \| VQ Vortex \|Morimoto XB \|Dynosty Tune 329.64hp 265.73 ft/lb

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dyno Day results	Rangerz	Engine & Drivetrain	4	10-26-2013 06:00 PM
Dyno results are in!	MyKindaGuise	Mid-Atlantic Region	17	10-21-2012 11:56 AM
My Z's Dyno Results	pty370z	Tuning	10	07-21-2011 02:37 PM
Dyno Results	TonyBPD	Engine & Drivetrain	39	03-24-2010 04:09 AM
NEW Dyno results are in....	2theextreme	Nissan 370Z General Discussions	56	08-22-2009 08:08 PM

08-21-2017, 01:54 AM	#18 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 917 Drives: 15' 370Z A/T AMM TT Rep Power: 24	Hmm yeah fair enough. Yeah I had some members from Zclub Australia send me their dyno sheets for the stock Z, and they all showed around 190-200 rwkw (260-270whp) even on multiple and different kinds of dynos. So yeah, I believe my reading was definitly not fully accurate and true.

05-18-2019, 05:50 PM	#19 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 917 Drives: 15' 370Z A/T AMM TT Rep Power: 24	All good, I was on a low timing MAP. Had a higher timing MAP activated and ran 1 more psi and got very good results!