Uprev issues :(

cwrenny · 08-01-2017, 07:35 PM

Hey guys just a hunch but did your pro tuner remember to disable the P006A DTC in your tune? lager MAF housings and boost will cause instant limp mode if this code isn't disabled. I'm running custom 3" intakes and had a hell of a time getting around a similar issue. The worst part is it'll go into limp mode without a hard code, just a soft code in the background so no CEL will come on. The new version of Uprev removed the DTC toggles so your new ROM might be missing the toggles to dissable the P006A but ProTuners should be able to work around this. If you want you can even send me your ROM and I can take a look.

Also I remember reading somewhere about an issue with the intake pipe near the filters on SC kits. Something about an adapter of some sort not fitting right and causing improper air flow around the MAFs. Double check your fitment and make sure everything is good.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any issues switching from ECUtek to Uprev?	QB333	Tuning	5	08-31-2016 12:18 AM
Need help - Car issues	2016	Engine & Drivetrain	17	02-05-2016 03:32 PM
Uprev e-tune vs dyno tuning with uprev??	babbagandu	Tuning	6	05-07-2012 10:53 PM
thinking of buying 370z, then GTM turbo's , but overheat issues,oil issues ??	Christopher	Nissan 370Z General Discussions	19	10-16-2009 03:55 PM
Initial Z issues that are now non-issues......	cave vulture	Nissan 370Z General Discussions	1	09-06-2009 10:19 PM

08-01-2017, 07:35 PM	#6 (permalink)
cwrenny Base Member Join Date: Jun 2017 Location: Toronto Posts: 17 Drives: 2011 G37 IPL Rep Power: 9	Hey guys just a hunch but did your pro tuner remember to disable the P006A DTC in your tune? lager MAF housings and boost will cause instant limp mode if this code isn't disabled. I'm running custom 3" intakes and had a hell of a time getting around a similar issue. The worst part is it'll go into limp mode without a hard code, just a soft code in the background so no CEL will come on. The new version of Uprev removed the DTC toggles so your new ROM might be missing the toggles to dissable the P006A but ProTuners should be able to work around this. If you want you can even send me your ROM and I can take a look. Also I remember reading somewhere about an issue with the intake pipe near the filters on SC kits. Something about an adapter of some sort not fitting right and causing improper air flow around the MAFs. Double check your fitment and make sure everything is good.