Fuel starvation, who else?

SPOHN · 05-13-2012, 08:52 AM

Quote:

Originally Posted by vjarnot

So, on the first page of this thread (2+ years ago) someone suggested fuel cell foam. Has anyone tried/investigated filling the left side of the tank with fuel cell foam, or creating a barrier in the middle of the tank with fuel cell foam?

Don't quote me but I believe a member here (TravisJB) had done this. But only mild results from it. Can't remember.

travisjb · 05-13-2012, 10:40 AM

Correct. My car had a combination of fuel cell foam and pickup pumps on drivers side and rear drivers side of tank.

The foam will control 'sloshing'... but I believe it will not control the fluid angle that occurs in a sustained right hand turn. Foam is not a solution to our problem but may help just a bit in certain situations.

I'm hoping that Doug at Z Fever gets on here soon to clarify how his fix is coming along.

SPOHN · 05-13-2012, 11:23 AM

^very interested in this. Travis were you also running the second fuel pump from the drivers side to feed the pot on the passengers side? I'd so how did that work?

travisjb · 05-13-2012, 12:27 PM

Yes, I had a second and third fuel pump that fed back to the OEM pump. I pulled those out for safety reasons... they were getting hot when not soaked in fuel, ie when turning left and I didn't want to risk it... the other problem was that those secondary fuel pumps were not mounted they were just held down by the foam... they were bumping around a lot... the solution z fever is putting together will use a second pump but it will be soaked at all times I understand, and so less risk. The secondary pump will mount in the secondary access panel and will be integrated with an in-tank swirl pot... one simple unit that then feeds back over to the OEM pump, as I understand it.

In any event, I'm going to refrain from discussing it further until Doug can come in here and explain for himself. It's his product, not mine.

SPOHN · 05-13-2012, 12:29 PM

Ok sounds great and simple.

vjarnot · 05-13-2012, 01:54 PM

Quote:

Originally Posted by travisjb

The secondary pump will mount in the secondary access panel and will be integrated with an in-tank swirl pot... one simple unit that then feeds back over to the OEM pump, as I understand it.

Anyone know if it's possible to simply swap the OEM pump and secondary sender from side to side? Won't fix the issue per se, but it would mitigate it due to the fact that the vast majority of tracks run clockwise.

Mike · 05-13-2012, 08:09 PM

the only certain fix that I know of is what jayfightmoves did and its a little extreme, plus you lose the fuel gauge. He took the tank out, cut it in half and welded the one side shut and just put half a tank in the car.

travisjb · 05-13-2012, 08:42 PM

^ damn, not a bad idea for my car... but wait, what materials is our tank made out of?

Mike · 05-13-2012, 09:40 PM

aluminum, I think.

phunk · 05-14-2012, 11:39 AM

Quote:

Originally Posted by spearfish25

I just want to say what a great product Phunk has made. It's helped me tremendously...

...in my wildest fantasies. The only thing worse than having no good solution to a problem is having someone dangle magical carrots in front of you and never deliver.

Ridiculous.

never say never.

phunk · 05-14-2012, 11:41 AM

Quote:

Originally Posted by Mike

aluminum, I think.

i have a brand new tank from nissan sitting on the floor here, and its definitely steel! Very easy to fabricate on. For those of you willing to fabricate on to your gas tank, I see no reason to go so far as to just cut the tank in half and weld it shut to keep it that way... if you already have the tank cut in half, just add proper baffles and trap doors and then weld it back together and retain full tank volume.

travisjb · 05-14-2012, 07:11 PM

Quote:

Originally Posted by phunk

i have a brand new tank from nissan sitting on the floor here, and its definitely steel! Very easy to fabricate on. For those of you willing to fabricate on to your gas tank, I see no reason to go so far as to just cut the tank in half and weld it shut to keep it that way... if you already have the tank cut in half, just add proper baffles and trap doors and then weld it back together and retain full tank volume.

Christ, maybe that's the best solution here... someone create a program where they offer modified steel tanks... if a core exchange is included, maybe it would be the cheapest and most effective fix to our problem???

phunk · 05-15-2012, 10:14 AM

^^^ thats a pretty labor extensive route.. I believe much more costly than a good surge canister setup. But, it does solve the problem at its very ROOT, which I am a big fan of doing.

For those who havent caught my thread about it... Fuel Starvation Control Product

We are now entering production on the solution we have tested by the Performance Motorsports team. I posted over there about it to get a head count for people in for the first batch. Production will begin in a day or two and we are trying to determine how much material to order for some of the parts we dont have the billet we need in stock for. I put all the details I have in that thread, those who sign up will get more specific details via a mailing list.

critical · 04-28-2013, 11:31 PM

Fuel starvation on the side of the freeway. Fml

takjak2 · 04-29-2013, 12:31 AM

Fuel starvation no more, thanks to Phunk!

05-13-2012, 10:40 AM	#512 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Correct. My car had a combination of fuel cell foam and pickup pumps on drivers side and rear drivers side of tank. The foam will control 'sloshing'... but I believe it will not control the fluid angle that occurs in a sustained right hand turn. Foam is not a solution to our problem but may help just a bit in certain situations. I'm hoping that Doug at Z Fever gets on here soon to clarify how his fix is coming along. __________________ 2009 370Z #104 For Sale

05-13-2012, 11:23 AM	#513 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	^very interested in this. Travis were you also running the second fuel pump from the drivers side to feed the pot on the passengers side? I'd so how did that work? __________________

05-13-2012, 12:27 PM	#514 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Yes, I had a second and third fuel pump that fed back to the OEM pump. I pulled those out for safety reasons... they were getting hot when not soaked in fuel, ie when turning left and I didn't want to risk it... the other problem was that those secondary fuel pumps were not mounted they were just held down by the foam... they were bumping around a lot... the solution z fever is putting together will use a second pump but it will be soaked at all times I understand, and so less risk. The secondary pump will mount in the secondary access panel and will be integrated with an in-tank swirl pot... one simple unit that then feeds back over to the OEM pump, as I understand it. In any event, I'm going to refrain from discussing it further until Doug can come in here and explain for himself. It's his product, not mine. __________________ 2009 370Z #104 For Sale

05-13-2012, 12:29 PM	#515 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Ok sounds great and simple. __________________

05-13-2012, 08:09 PM	#517 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	the only certain fix that I know of is what jayfightmoves did and its a little extreme, plus you lose the fuel gauge. He took the tank out, cut it in half and welded the one side shut and just put half a tank in the car. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

05-13-2012, 08:42 PM	#518 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	^ damn, not a bad idea for my car... but wait, what materials is our tank made out of? __________________ 2009 370Z #104 For Sale

05-13-2012, 09:40 PM	#519 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	aluminum, I think. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

05-15-2012, 10:14 AM	#523 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,657 Drives: 370 Rep Power: 947878	^^^ thats a pretty labor extensive route.. I believe much more costly than a good surge canister setup. But, it does solve the problem at its very ROOT, which I am a big fan of doing. For those who havent caught my thread about it... Fuel Starvation Control Product We are now entering production on the solution we have tested by the Performance Motorsports team. I posted over there about it to get a head count for people in for the first batch. Production will begin in a day or two and we are trying to determine how much material to order for some of the parts we dont have the billet we need in stock for. I put all the details I have in that thread, those who sign up will get more specific details via a mailing list. scruffydog, nismo09 and scionide like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

04-28-2013, 11:31 PM	#524 (permalink)
critical A True Z Fanatic Join Date: Oct 2012 Location: Washington Posts: 1,252 Drives: 09' 370z 7AT Rep Power: 15	Fuel starvation on the side of the freeway. Fml

04-29-2013, 12:31 AM	#525 (permalink)
takjak2 A True Z Fanatic Join Date: Feb 2011 Location: Sterling, VA Posts: 1,922 Drives: Legit Racecar 370Z Rep Power: 142	Fuel starvation no more, thanks to Phunk! Rusty likes this. __________________ Mods \| Stuff \| Things \| Seat Time \| Nismo facebook.com/TeamSparrowSpeed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fuel question	MYZ	Engine & Drivetrain	7	04-04-2020 03:22 PM
Fuel Economy...WTF?	spearfish25	Nissan 370Z General Discussions	28	07-08-2009 06:05 PM
Question about air/fuel	zZSportZz	Nissan 370Z General Discussions	9	06-15-2009 04:59 PM
370Z Fuel Gauge?!?!	Temple	Exterior & Interior	47	04-24-2009 05:07 PM
Fuel Release	FERRARI	Nissan 370Z General Discussions	3	02-13-2009 11:36 AM