First Day Tracking the Z

Read T · 06-08-2014, 07:11 AM

*Edit - better videos from Sunday in post 17*

Yesterday was my first day with the Z on any track or autocross. Also my first HPDE at Carolina Motorsports Park (I have previously only driven at VIR).

It was lots of fun, and this course is pretty hard on brakes. I put myself into novice class, but have had a few HPDEs in the past. In class there's an M3 and RX8 that i'm mostly on pace with, and some slow guys that keep not giving a pass

The car is mostly stock with an OEM Nismo exhaust and OEM nismo suspension. Very impressed with PFC 08 pads and PFC 665 brake fluid, Z1 motorsports cheap slotted rotors I was skeptical of but are holding up great *knocks on wood*.

Yesterday the first 30 min run was in a thunderstorm, which was a bit intense. I did keep VDC on yesterday and as you can tell by the video, coming out of most sweepers or even tight turns the VDC is KILLING my throttle on the straights. (you can watch that little light blinking nonstop coming out of carousel). Any thoughts of VDC - I think off is the way to go

Today will be a VDC off day, although we are supposed to get thunderstorms again this evening.

Video (complete with RX8 popping a few flames out the back):
https://www.youtube.com/watch?v=PMHHcCRb2Z0

Gopro Hero3, framerate and resolution turned down for battery life and because my laptop can't handle it. Mounted on the rear glass.

Read T · 06-08-2014, 07:14 AM

And yes I am a novice, but thanks for everyone's critique haha

NORAIN · 06-08-2014, 09:19 AM

I had the same problem last weekend at VIR. I think mine was from tires. 305 S-04's in back, the soft side wall and the over sized tire on stock Rays was rolling over a bit more than the OEM Potenza's. I will run with VDC off next time. And hopefully have a more suited tire. What tires are you running? I'm curious to here how it goes for you with it off.

Rangerz · 06-08-2014, 11:25 AM

Your on the right track. VDC off for tracking. I did leave mine on when we had a soaked trackday.

If the tarmac is shinny from the rain be cautious VDC on. If the tarmac is grey from slight rain I take it off and ease into the sission until I feel comfotable.

Then to add one more deminsion you can do the YAW sensor mod to have zero traction control.

just make sure your comfortable with the traction of the car before you cut out VDC or YAW

Read T · 06-08-2014, 05:23 PM

Today went with traction control off. WORLD of difference! No only are you able to actually give it throttle out of the corners, but it feels much more planted in the corners since I wasn't fighting with the ECU the whole time. I got a little tail happy once on a low speed very tight turn (turn 14) but it was no big deal at all. If you go to a track, it might be good to learn the track with VDC on, but once you're familiar with the course TURN IT OFF.

That said, it was thunderstorming for the second half of the day. VDC went back on for that, seeing as I had to drive my Z to work this week.

I will upload videos to youtube and post more here. MUCH better than yesterday's video I posted in post #1. Last run of the day they combined green/yellow run groups and I went solo, it started thunderstorming halfway through.

Read T · 06-08-2014, 05:25 PM

TIRES: Kumho XS 275/35/18 on all corners Great tire for the money, gobs of grip when dry and did very well in the wet too. They did overheat on me some the first day, but I ended up changing pressures to ~36 cold all around and did well wet and dry.

wheels are Forgestar F14 18x10, forgot the offset but square.

Read T · 06-08-2014, 05:31 PM

FUEL STARVE!!!

Forgot to mention, this sucks and cut one of my sessions short. CMP has one long right hand carousel, and one long complex of 3 right turns (taken as a sweeper). I had added a splash of fuel to the tank before one of my runs and the gas gauge was reading 1 dot above 1/4 tank. Coming out of both of those turns, the car starved and throttle died. I pitted in, and even though it was reading over 1/4 tank, my car still took over 7 gallons of fuel. Afterwards no worries. This totally freaked me out and sucks.

Rusty · 06-08-2014, 06:08 PM

Fuel starve sucks.

Been there and fixed it wirh "phunks" kit.

I run with the VDC off. With it on. It kills your drive coming out of the turns.

Just wait until you're in a turn with the back just starting to come out, and the othe nanny kicks in and applies a brake for you to keep the car straight.

I'm putting in a switch for the YAW sensor.

Have fun.

Z-Girl 12 · 06-08-2014, 06:14 PM

Subscribed for cool vids

Read T · 06-08-2014, 09:07 PM

I'll have vids up soon. If anyone has any tips with GoPro I could use some. If I import the clip into CineForm studio, I have to convert the file from .mp4 to .avi to edit it. I like editing it so I can crop/frame the image, zoom in whats in the windshield, and turn up contrast/down exposure so you can see out of the car and not just interior. When I do convert from .mp4 to .avi, I lose a ton of sharpness and the image looks washed out. Any tips? I'm not a computer guy. I work on pets and cars.

Read T · 06-08-2014, 09:33 PM

Brakes
Also a HUGE shout out to PFC brakes. The classroom instructor was kind of a brake guru and was talking about Hawk a good bit, but mentioned hands down the best pads in his opinion were PFC. I ran PFC 08 (endurance sportscar /SCCA racing compound) on all corners and was amazed with the feel and stopping power these provided. They are a little loud until warmed up or in the paddock. Also ran PFC 665 fluid and had no concerns there.

Note that I did get a few sets of pads and 2L of the fluid for almost nothing, but I'm trying to be impartial here.

Read T · 06-09-2014, 06:46 PM

Not sure if this will work, but one of my friends who's an instructor shot this video with Harry's Lap Timer. It shows the course layout well.

https://www.facebook.com/photo.php?v=10203194590539566

TheBoomSpoon · 06-09-2014, 07:59 PM

Quote:

Originally Posted by Read T

I'll have vids up soon. If anyone has any tips with GoPro I could use some. If I import the clip into CineForm studio, I have to convert the file from .mp4 to .avi to edit it. I like editing it so I can crop/frame the image, zoom in whats in the windshield, and turn up contrast/down exposure so you can see out of the car and not just interior. When I do convert from .mp4 to .avi, I lose a ton of sharpness and the image looks washed out. Any tips? I'm not a computer guy. I work on pets and cars.

have you downloaded gopro studio from their website? Its free, and allows you to do the above mentioned

Sent from my SAMSUNG-SGH-I747 using Tapatalk

kfull · 06-09-2014, 08:48 PM

Nice! how were your oil temps?

Read T · 06-10-2014, 07:31 AM

Quote:

Originally Posted by TheBoomSpoon

have you downloaded gopro studio from their website? Its free, and allows you to do the above mentioned

Sent from my SAMSUNG-SGH-I747 using Tapatalk

I have downloaded the cineform studio. It makes you convert the .mp4 to .mov before editing and due to that you lose a lot of the image quality. You lose just as much when you upload to youtube like I did anyways. The videos I have on my desktop are crystal clear compared to the ones I'm going to post in the next few minutes

06-08-2014, 07:11 AM	#1 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 19	First Day Tracking the Z Edit - better videos from Sunday in post 17 Yesterday was my first day with the Z on any track or autocross. Also my first HPDE at Carolina Motorsports Park (I have previously only driven at VIR). It was lots of fun, and this course is pretty hard on brakes. I put myself into novice class, but have had a few HPDEs in the past. In class there's an M3 and RX8 that i'm mostly on pace with, and some slow guys that keep not giving a pass The car is mostly stock with an OEM Nismo exhaust and OEM nismo suspension. Very impressed with PFC 08 pads and PFC 665 brake fluid, Z1 motorsports cheap slotted rotors I was skeptical of but are holding up great knocks on wood. Yesterday the first 30 min run was in a thunderstorm, which was a bit intense. I did keep VDC on yesterday and as you can tell by the video, coming out of most sweepers or even tight turns the VDC is KILLING my throttle on the straights. (you can watch that little light blinking nonstop coming out of carousel). Any thoughts of VDC - I think off is the way to go Today will be a VDC off day, although we are supposed to get thunderstorms again this evening. Video (complete with RX8 popping a few flames out the back): https://www.youtube.com/watch?v=PMHHcCRb2Z0 Gopro Hero3, framerate and resolution turned down for battery life and because my laptop can't handle it. Mounted on the rear glass. igotcabada, Eagle, Rusty and 2 others like this. __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS Last edited by Read T; 06-10-2014 at 10:46 AM.

06-08-2014, 07:14 AM	#2 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 19	And yes I am a novice, but thanks for everyone's critique haha __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

06-08-2014, 09:19 AM	#3 (permalink)
NORAIN Enthusiast Member Join Date: Jun 2013 Location: Wilmington, NC Age: 57 Posts: 323 Drives: 2011 370Z 6M SP Rep Power: 13	I had the same problem last weekend at VIR. I think mine was from tires. 305 S-04's in back, the soft side wall and the over sized tire on stock Rays was rolling over a bit more than the OEM Potenza's. I will run with VDC off next time. And hopefully have a more suited tire. What tires are you running? I'm curious to here how it goes for you with it off. __________________ Swift Springs\|265-305 RE-11\|Forgestar F14\|F.I. TDX S.S. 12" Res."Milled Out"\|K&N\|SPL\|Z1(34 row)oil cooler\|Z1 brake upgrade\|Hotchkis Zspeed\|Team Voodoo\|HPDEjunkie.com

06-08-2014, 11:25 AM	#4 (permalink)
Rangerz Enthusiast Member Join Date: Jun 2013 Location: Northern Utah Age: 60 Posts: 476 Drives: 2012 370 Nismo Rep Power: 13	Your on the right track. VDC off for tracking. I did leave mine on when we had a soaked trackday. If the tarmac is shinny from the rain be cautious VDC on. If the tarmac is grey from slight rain I take it off and ease into the sission until I feel comfotable. Then to add one more deminsion you can do the YAW sensor mod to have zero traction control. just make sure your comfortable with the traction of the car before you cut out VDC or YAW __________________ Stillen Gen III/ NST/ Fast Intentions Non-Res HFC & 12" Resonated CF TDX/ Setreb series 9 OC/ SPL upper control arms/ Whiteline front & rear swaybars/ Uprev tuned by Seb@specialtyZ/ 319HP 262TQ/ Z1 PS Cooler/ Z1 SS Premium break lines/ CJM Road Race pump/Carbotech F:XP10 R:XP8 Nismo OC DIY Last edited by Rangerz; 06-08-2014 at 12:08 PM.

06-08-2014, 05:23 PM	#5 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 19	Today went with traction control off. WORLD of difference! No only are you able to actually give it throttle out of the corners, but it feels much more planted in the corners since I wasn't fighting with the ECU the whole time. I got a little tail happy once on a low speed very tight turn (turn 14) but it was no big deal at all. If you go to a track, it might be good to learn the track with VDC on, but once you're familiar with the course TURN IT OFF. That said, it was thunderstorming for the second half of the day. VDC went back on for that, seeing as I had to drive my Z to work this week. I will upload videos to youtube and post more here. MUCH better than yesterday's video I posted in post #1. Last run of the day they combined green/yellow run groups and I went solo, it started thunderstorming halfway through. __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

06-08-2014, 05:25 PM	#6 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 19	TIRES: Kumho XS 275/35/18 on all corners Great tire for the money, gobs of grip when dry and did very well in the wet too. They did overheat on me some the first day, but I ended up changing pressures to ~36 cold all around and did well wet and dry. wheels are Forgestar F14 18x10, forgot the offset but square. __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

06-08-2014, 05:31 PM	#7 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 19	FUEL STARVE!!! Forgot to mention, this sucks and cut one of my sessions short. CMP has one long right hand carousel, and one long complex of 3 right turns (taken as a sweeper). I had added a splash of fuel to the tank before one of my runs and the gas gauge was reading 1 dot above 1/4 tank. Coming out of both of those turns, the car starved and throttle died. I pitted in, and even though it was reading over 1/4 tank, my car still took over 7 gallons of fuel. Afterwards no worries. This totally freaked me out and sucks. Eagle likes this. __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

06-08-2014, 06:08 PM	#8 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,490 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Fuel starve sucks. Been there and fixed it wirh "phunks" kit. I run with the VDC off. With it on. It kills your drive coming out of the turns. Just wait until you're in a turn with the back just starting to come out, and the othe nanny kicks in and applies a brake for you to keep the car straight. I'm putting in a switch for the YAW sensor. Have fun. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

06-08-2014, 06:14 PM	#9 (permalink)
Z-Girl 12 A True Z Fanatic Join Date: Apr 2012 Location: Florida Posts: 4,105 Drives: Spirited Rep Power: 11717	Subscribed for cool vids __________________ 2012 Z-SOLD 2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq

06-08-2014, 09:07 PM	#10 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 19	I'll have vids up soon. If anyone has any tips with GoPro I could use some. If I import the clip into CineForm studio, I have to convert the file from .mp4 to .avi to edit it. I like editing it so I can crop/frame the image, zoom in whats in the windshield, and turn up contrast/down exposure so you can see out of the car and not just interior. When I do convert from .mp4 to .avi, I lose a ton of sharpness and the image looks washed out. Any tips? I'm not a computer guy. I work on pets and cars. __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

06-08-2014, 09:33 PM	#11 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 19	Brakes Also a HUGE shout out to PFC brakes. The classroom instructor was kind of a brake guru and was talking about Hawk a good bit, but mentioned hands down the best pads in his opinion were PFC. I ran PFC 08 (endurance sportscar /SCCA racing compound) on all corners and was amazed with the feel and stopping power these provided. They are a little loud until warmed up or in the paddock. Also ran PFC 665 fluid and had no concerns there. Note that I did get a few sets of pads and 2L of the fluid for almost nothing, but I'm trying to be impartial here. __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

06-09-2014, 06:46 PM	#12 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 19	Not sure if this will work, but one of my friends who's an instructor shot this video with Harry's Lap Timer. It shows the course layout well. https://www.facebook.com/photo.php?v=10203194590539566 __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

06-09-2014, 08:48 PM	#14 (permalink)
kfull Track Member Join Date: Mar 2012 Location: Massachusetts Posts: 909 Drives: A lot Rep Power: 15	Nice! how were your oil temps? __________________ 2012 GM 6MT sports package \| FI non res cf exhaust \| K&N Drop Ins \| Viper 3303 security system w/ tilt sensor \| GTR start button \| 35% rear 45% side window tint \| Michelin PSS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is it like to hit a deer when tracking!	nepali	The Lounge (Off Topic)	26	08-06-2012 01:41 PM
First time tracking the Z	JEMP1003	Track / Autocross / Drifting / Dragstrip	24	07-28-2012 01:50 PM
Tracking the NISMO	Nism0370	Track / Autocross / Drifting / Dragstrip	26	04-30-2011 01:11 PM
Tracking	jaycz	Wheels & Tires	9	02-11-2011 05:26 PM
VIN Tracking	tbonesteak	Nissan 370Z Pricing / Ordering Discussions	5	07-30-2009 12:46 PM