I know I will be bookmarking all the required reading before attempting the install.

Some picks of why I like this thing so much. One dot of fuel, no problem (ran the tank almost empty to get a full one of 94 before the track day). At the track and at a 1/4 tank, no problem (conserving fuel at 8.4 mpg)

Here you go. :D

http://www.the370z.com/track-autocro...p-install.html

Thanks Phunk, pleasure talking to you as always.

:tiphat:

Count me in for this buy if it isn't over yet!! Sent you a PM Phunk.

I think we are maxed out at 12. Could possibly do another batch really soon if there is some more people

Cool! I'm in so post up or let me know when you want to start another batch. Hopefully we can get one together before I turbo so I can do the install with that lol.

Crap, I missed this thread. How the heck did I do that.

I am just learning of this product.

If it fits a 350z, I am def in. If anybody back out for whatever reason, i'll take it!

Unfortunately it will not fit a 350z, the older gas tanks are not deep enough.

of course... the older guy with the older car gets no love. :(

Phunk,

No rush from me, but is there any ETA?

Also are there any concerns about installing this and it effecting any tune I may have/get? Just curious if I should hold off on my tune until after I install the RRP.

Thanks.

Are you having fuel starve issues on the 350z? I raced a stock fuel system Spec Z in a 16 hour World Racing League endurance race over the weekend and took that 350z down to almost empty (5 miles left on the display) with no fuel starve. In contrast my PrePhunk 370z would starve at less than 10 laps from full.

What year is yours DR? I have several friends with 350's G35's at track that complain of fuel starve as well. But there's seems to be a lot tamer than ours and is not an issue until ~1/4 tank.

We are on the tail end of it now.. Tonight I am setting up the CNC to cut the inside profile on those thick looking tubes on the right (its an extrusion, we already turned down the outside of them, but I have to mill the inside shape).

After that, I just have to make more level sensor mounts because I only had 6.

We will probably start welding together the first 6 before the end of the week.

I dont want to say an ETA yet, but I think its safe to say these will all be out the door before the end of this month! :tup:

As for tuning, the RRP will generally not require any tune adjustment.