Number sticker decals for track

jkim23 · 05-20-2013, 04:20 PM

I already searched the forum and nothing came up.

Do you guys know a place that makes sticker number decals for track days? Thanks.

ChrisSlicks · 05-20-2013, 05:20 PM

I use iZoom Graphics

The reuseable vinyl is the way to go, if you take car to only apply it to a clean car and make sure you have clean hands when handling it will last quite a while.

They do permanent vinyl and magnetic numbers too but obviously magnetic isn't going to work to well.

djtodd · 05-20-2013, 06:29 PM

soloperformance.com

If you're an scca member they have a discount.

gomer_110 · 05-20-2013, 07:49 PM

Quote:

Originally Posted by djtodd

soloperformance.com

If you're an scca member they have a discount.

Got a set of the reusable vinyl numbers myself for autox. I'm pretty sure if you get them on well (no bubbles, etc.) that they'll stay put even at high speed.

Mike · 05-20-2013, 08:21 PM

Discovery Parts

///MSH · 05-20-2013, 09:05 PM

From past experience. I'd vouch for izoom as noted above......but I have not used the other resources mentioned. I will compare all the above when I buy again.

blackcherry20 · 05-20-2013, 09:08 PM

Quote:

Originally Posted by ChrisSlicks

I use iZoom Graphics

The reuseable vinyl is the way to go, if you take car to only apply it to a clean car and make sure you have clean hands when handling it will last quite a while.

They do permanent vinyl and magnetic numbers too but obviously magnetic isn't going to work to well.

image.jpg
^^^magnetic

zoomgraphics.com

ChrisSlicks · 05-20-2013, 09:46 PM

Quote:

Originally Posted by blackcherry20

Attachment 69372
^^^magnetic

zoomgraphics.com

Nice! I was afraid the magnets wouldn't work well on the curves. With high speed track though I think vinyl is still probably preferable.

gomer_110 · 05-20-2013, 10:15 PM

Watch out for the magnets as the speed increases especially if they're cold and won't conform to the curves well. Even at AutoX speeds I had the magnets come off, hence the reason I've gone to reusable vinyl.

jkim23 · 05-21-2013, 12:55 AM

Thanks for all the responses. I had another member recommend izoomgraphics via PM.

bobburk · 05-21-2013, 04:26 AM

I always love the comments at the track like "has anyone seen a magnetic 6"
Personally I bought a vinyl cutter and make my own. With my wife and I both doing around 1 trackday a month it payed for it's self in under a year.

blackcherry20 · 05-21-2013, 05:09 AM

Quote:

Originally Posted by ChrisSlicks

Nice! I was afraid the magnets wouldn't work well on the curves. With high speed track though I think vinyl is still probably preferable.

Quote:

Originally Posted by gomer_110

Watch out for the magnets as the speed increases especially if they're cold and won't conform to the curves well. Even at AutoX speeds I had the magnets come off, hence the reason I've gone to reusable vinyl.

only auto cross here when it is fairly warm...so no worries about them coming off...plus I don't go so fast as to have them blow off! LOL

blackcherry20 · 05-21-2013, 05:10 AM

Quote:

Originally Posted by bobburk

I always love the comments at the track like "has anyone seen a magnetic 6"
Personally I bought a vinyl cutter and make my own. With my wife and I both doing around 1 trackday a month it payed for it's self in under a year.

Vinyl cutter at iZoom too?

Onelownismo · 05-21-2013, 07:56 PM

I bought some vinyl numbers from izoom today. Hopefully they hold up well!

05-20-2013, 04:20 PM	#1 (permalink)
jkim23 Base Member Join Date: Jun 2012 Location: orange county ca Posts: 57 Drives: 2012 370z Rep Power: 12	Number sticker decals for track I already searched the forum and nothing came up. Do you guys know a place that makes sticker number decals for track days? Thanks. __________________ 2012 Sport \| Hankook R-S3 \| StopTech \| Motul RBF600 \| K&N Air \| Nismo Exhaust \| Z1 34

05-20-2013, 05:20 PM	#2 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	I use iZoom Graphics The reuseable vinyl is the way to go, if you take car to only apply it to a clean car and make sure you have clean hands when handling it will last quite a while. They do permanent vinyl and magnetic numbers too but obviously magnetic isn't going to work to well. blackcherry20 likes this. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

05-20-2013, 08:21 PM	#5 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	Discovery Parts __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

05-20-2013, 09:05 PM	#6 (permalink)
///MSH Base Member Join Date: Jul 2011 Location: Owasso, OK Posts: 86 Drives: '11 370Z Nismo Rep Power: 13	From past experience. I'd vouch for izoom as noted above......but I have not used the other resources mentioned. I will compare all the above when I buy again. __________________ 2011 Nismo with...Stillen Gen3 CAI, FI LTH's, Stillen CBE with Springfielddyno rear section. Stillen under drive crank pulley, UpRev, and LW flywheel. Penske 8300DA Valved by ANZE, SPR FCA's, Stillen F/R adj. sway bars, Enkei PF01's, and Hoosier A6's

05-20-2013, 10:15 PM	#9 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36940	Watch out for the magnets as the speed increases especially if they're cold and won't conform to the curves well. Even at AutoX speeds I had the magnets come off, hence the reason I've gone to reusable vinyl. blackcherry20 likes this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

05-20-2013, 06:29 PM	#3 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3397	soloperformance.com If you're an scca member they have a discount.

05-21-2013, 12:55 AM	#10 (permalink)
jkim23 Base Member Join Date: Jun 2012 Location: orange county ca Posts: 57 Drives: 2012 370z Rep Power: 12	Thanks for all the responses. I had another member recommend izoomgraphics via PM. __________________ 2012 Sport \| Hankook R-S3 \| StopTech \| Motul RBF600 \| K&N Air \| Nismo Exhaust \| Z1 34

05-21-2013, 04:26 AM	#11 (permalink)
bobburk Base Member Join Date: Mar 2013 Location: Lowry Crossing, Tx Age: 58 Posts: 151 Drives: 13' Black 370Z Nismo Rep Power: 12	I always love the comments at the track like "has anyone seen a magnetic 6" Personally I bought a vinyl cutter and make my own. With my wife and I both doing around 1 trackday a month it payed for it's self in under a year. blackcherry20 likes this.

05-21-2013, 07:56 PM	#14 (permalink)
Onelownismo Track Member Join Date: Jul 2011 Location: Suffolk, VA Age: 37 Posts: 805 Drives: 09 PG base/sport Rep Power: 14	I bought some vinyl numbers from izoom today. Hopefully they hold up well! blackcherry20 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
VIN Number (To Track Down 2013 Reflector Part Number)	OldGuy	Nissan 370Z General Discussions	4	04-10-2013 09:44 PM
Decals are done :)	SoCalZ	40th Anniversary 370Z	13	06-18-2012 05:30 PM
Car Decals	A 2 Z	The Lounge (Off Topic)	6	02-15-2012 09:44 AM
Window Decals	Alto101	Nissan 370Z General Discussions	8	05-28-2011 01:21 PM
The370Z decals are here!!!	AK370Z	Announcements	43	08-16-2009 01:46 PM