Nissan Mesh Grill

SPOHN · 12-29-2012, 08:30 AM

Quote:

Originally Posted by wstar

For the DIY crowd, Spohn did it the cheap home-made way here: Spohn's Journal

And then I copied it here: wstar's Journal

Rusty · 12-29-2012, 09:15 AM

Quote:

Originally Posted by wstar

For the DIY crowd, Spohn did it the cheap home-made way here: Spohn's Journal

And then I copied it here: wstar's Journal

How did I miss this?

Dustin@Z1 · 12-29-2012, 09:46 AM

+1 for going OEM and RARE. I like it! Street RC FTW!

gurneyeagle · 12-29-2012, 10:42 AM

Looks great Rusty!

I'm going to try and build the same thing myself. Got all the parts from custom car grills.

customcargrills.com - Perforated Hex Aluminum Grill Mesh Sheets

They even sell a rubber gasket to finish it off. Total cost of parts was less than $100.

MJB · 12-29-2012, 10:48 AM

Quote:

Originally Posted by gurneyeagle

Looks great Rusty!

I'm going to try and build the same thing myself. Got all the parts from custom car grills.

customcargrills.com - Perforated Hex Aluminum Grill Mesh Sheets

They even sell a rubber gasket to finish it off. Total cost of parts was less than $100.

I've bought from them several times. Great products!

I really like the direction Rusty's Nismo is going!!!

XwChriswX · 04-20-2013, 01:02 AM

That site only has a 350Z posted? I'm guessing it fits both? This would be very nice.

Csmall · 11-20-2015, 10:27 AM

Hey, I am looking to replace the stock grill with an aluminum one. Someone pointed me to your post. It appears that you put yours over the stock and did not replace. Any input on how to access the grill, done from the top? Do I need to remove the bumper?

Rusty · 11-20-2015, 11:04 AM

If you look at post #1. It shows me drilling 4 holes. 2 top, and 2 bottom on the outside of the opening. The bottom 2 holes are where the post on the grill go into. The top 2 holes are for the screws. you don't need to remove the bumper.

carlitos_370z · 11-20-2015, 12:09 PM

I have to do this i think... my Stillen 25 rows oil cooler core was hit by something on the highway and was broken

now trying to see if i can fixed or go and buy a new oil cooler core

Brendan · 11-21-2015, 07:41 PM

I cant get over how much nicer diy looks than oem in this scenario.

Rusty · 11-24-2015, 09:46 PM

Quote:

Originally Posted by Brendan

I cant get over how much nicer diy looks than oem in this scenario.

It's not OEM. It's from the Nissan Motorsorts catalog. It's a RC race item.

12-29-2012, 09:46 AM	#18 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 19	+1 for going OEM and RARE. I like it! Street RC FTW! Rusty and sixpax like this.

12-29-2012, 10:42 AM	#19 (permalink)
gurneyeagle A True Z Fanatic Join Date: Jul 2011 Location: Houston/Saint Augustine Posts: 2,681 Drives: '18 Audi TT RS Rep Power: 20216	Looks great Rusty! I'm going to try and build the same thing myself. Got all the parts from custom car grills. customcargrills.com - Perforated Hex Aluminum Grill Mesh Sheets They even sell a rubber gasket to finish it off. Total cost of parts was less than $100. Rusty likes this. __________________ Waiting on the Z35! SOLD - 2011 Gun Metallic Touring 7AT w Sports Pkg & Nav, Nismo Bumper and Rims, RC Grille, RC Brake Ducts, H&R Spacers, Painted Door Hdls, GTR Start Button, Nav By-Pass, EVO R Fog Light, CF Ducktail, CF Interior Trim

04-20-2013, 01:02 AM	#21 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	That site only has a 350Z posted? I'm guessing it fits both? This would be very nice. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

11-20-2015, 10:27 AM	#22 (permalink)
Csmall Base Member Join Date: Aug 2013 Location: Albuquerque Posts: 33 Drives: 2011 370z sport/tour Rep Power: 12	Hey, I am looking to replace the stock grill with an aluminum one. Someone pointed me to your post. It appears that you put yours over the stock and did not replace. Any input on how to access the grill, done from the top? Do I need to remove the bumper? __________________ 2011 Touring Sport Eibach Antiroll Magnaflow Catback

11-20-2015, 11:04 AM	#23 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,503 Drives: 2011 Nismo GM 6M Rep Power: 2684439	If you look at post #1. It shows me drilling 4 holes. 2 top, and 2 bottom on the outside of the opening. The bottom 2 holes are where the post on the grill go into. The top 2 holes are for the screws. you don't need to remove the bumper. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

11-20-2015, 12:09 PM	#24 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7587	I have to do this i think... my Stillen 25 rows oil cooler core was hit by something on the highway and was broken now trying to see if i can fixed or go and buy a new oil cooler core

11-21-2015, 07:41 PM	#25 (permalink)
Brendan Track Member Join Date: Apr 2013 Location: Colorado Posts: 646 Drives: Poor man's Porsche Rep Power: 543	I cant get over how much nicer diy looks than oem in this scenario. carlitos_370z likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ring on mesh grill?	Apoc370z	Exterior & Interior	4	08-17-2012 12:42 PM
Grill Mesh	kielbasa16	Exterior & Interior	21	04-26-2011 11:13 AM
Traeger Grill	tmjohansen	The Lounge (Off Topic)	2	10-13-2010 01:10 PM
Bilet Grill	Puma0183	Exterior & Interior	19	06-16-2009 11:08 AM