Lets Talk Rotors: Cryo-treating

MightyBobo · 10-15-2012, 01:37 PM

Who's got em, if anyone? Any first-hand experience? I'd like to go with some blank cryo-treated rotors for my next set...hopefully get some better life and durability out of them on the track...

And if anyone knows, are there any cryo-treating joints in the Baltimore area? Shipping these off for treating is EXPENSIVE, obviously...

Found these on Tirerack.com, but sadly the rear pair that are cryo-treated arent on there...

Centric High Carbon Plain 125 Series Cryo Treated Rotor

cossie1600 · 10-15-2012, 02:14 PM

I had a Corvette that had cross drilled rotors. they all developed surface cracks near the hole after each track event. I switched to cryo treating Napa rotors after going through two set of rotors. no cracking since then

MightyBobo · 10-15-2012, 02:24 PM

I'd never track cross-drilled rotors. That's why Im sticking with blanks. But, I gotcha

cossie1600 · 10-15-2012, 03:34 PM

the class I ran in didn't allow me to convert to blank. it was either paying 40 to cryo treat them or crack the rotor every track day. it doesn't make he car stop any better. just make he rotor last longer

MightyBobo · 10-15-2012, 06:01 PM

Quote:

Originally Posted by cossie1600

the class I ran in didn't allow me to convert to blank. it was either paying 40 to cryo treat them or crack the rotor every track day. it doesn't make he car stop any better. just make he rotor last longer

Ohhh, right. That's a PITA lol.

Right, I knew that, I was curious if anyone had done it on here and had good experiences with the life of the rotor improving. Looks like you answered my question! Thanks buddy!

cossie1600 · 10-15-2012, 06:55 PM

Luckily the cost of rotors have come down quite a bit for the Z ($100), the extra $30-40 for cryo treating won't be to bad. It beats buying those two piece rotors.

djtodd · 10-15-2012, 11:31 PM

the weight reduction on the 2-piece is pretty nice though

MightyBobo · 10-16-2012, 01:32 AM

Quote:

Originally Posted by djtodd

the weight reduction on the 2-piece is pretty nice though

Blech, not worth the price for just HPDE-ing

Sent from my Galaxy S3

cossie1600 · 10-16-2012, 07:51 AM

Exactly, my cryo-treated rotor had no problem stopping my car from 147mph lap after lap at VIR. The same rotor without the cryo cracked after just one event

sig11 · 10-16-2012, 10:15 AM

It does work but we don't know exactly why. :P We had a good thread about the physics of it on the 3balls forums but they're lost now... even had a fella willing to treat a few sets for A-B testing.

MightyBobo · 10-16-2012, 10:31 AM

Quote:

Originally Posted by sig11

It does work but we don't know exactly why. :P We had a good thread about the physics of it on the 3balls forums but they're lost now... even had a fella willing to treat a few sets for A-B testing.

If I remember right, it's something about aligning the molecules in a way that's similar to tempering the metal - just makes it that much stronger.

cossie1600 · 10-16-2012, 10:48 AM

also I used to get rotors hot enough to turn blue. cryo treated ones seem to have less of that problem.

StangerGT · 10-16-2012, 03:40 PM

I will prolly go this route when i swap my rotors next time around. Mine seemed to hold up well last event (stock)... i think i cooked the pads a bit though.

gomer_110 · 10-16-2012, 08:14 PM

Quote:

Originally Posted by MightyBobo

If I remember right, it's something about aligning the molecules in a way that's similar to tempering the metal - just makes it that much stronger.

If anyone's looking for a place to have this done, a lot of commercial heat treat shops either have the capability or can atleast point you in the right direction.

cv129 · 07-03-2013, 11:50 PM

Reviving an old thread. I was researching on rotors and I found some interesting read on cryo treatment

cryogenic rotors - Page 2 - Rennlist Discussion Forums

cryo-treated rotors = snake oil! - NASIOC

Cryogenic Rotors: Good or Snake Oil? - Pelican Parts Technical BBS

I was also reading on RB rotors, they heat treated their rotors but do not use cryo treatment.

Seems like results vary. Hope we have some chemists/engineer here that can chime in.

10-15-2012, 01:37 PM	#1 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 52	Lets Talk Rotors: Cryo-treating Who's got em, if anyone? Any first-hand experience? I'd like to go with some blank cryo-treated rotors for my next set...hopefully get some better life and durability out of them on the track... And if anyone knows, are there any cryo-treating joints in the Baltimore area? Shipping these off for treating is EXPENSIVE, obviously... Found these on Tirerack.com, but sadly the rear pair that are cryo-treated arent on there... Centric High Carbon Plain 125 Series Cryo Treated Rotor __________________ I don't own a car anymore.

10-15-2012, 02:24 PM	#3 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 52	I'd never track cross-drilled rotors. That's why Im sticking with blanks. But, I gotcha __________________ I don't own a car anymore.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CZP 2-Piece Rotors - Stoptech Rotors - Hawk Pads - SS Lines Great Prices & Quality!!	Coz@Czp	Suspension/Brakes	29	07-07-2017 12:30 PM
Hey Louisiana... lets talk meet!	TypeOne	Southern Region	191	09-11-2011 08:22 AM
Lets re-think about parking too far away..	LuckyJinx	Nissan 370Z General Discussions	83	01-10-2011 07:54 AM
Lets have some laughs	RiCharlie	Nissan 370Z General Discussions	81	11-25-2010 08:50 AM
Lets talk about subs for a Zenclosures box	Boosted Josh	Audio & Video	28	08-04-2010 07:17 PM

10-15-2012, 02:14 PM	#2 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 29	I had a Corvette that had cross drilled rotors. they all developed surface cracks near the hole after each track event. I switched to cryo treating Napa rotors after going through two set of rotors. no cracking since then

10-15-2012, 03:34 PM	#4 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 29	the class I ran in didn't allow me to convert to blank. it was either paying 40 to cryo treat them or crack the rotor every track day. it doesn't make he car stop any better. just make he rotor last longer

10-15-2012, 06:55 PM	#6 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 29	Luckily the cost of rotors have come down quite a bit for the Z ($100), the extra $30-40 for cryo treating won't be to bad. It beats buying those two piece rotors.

10-15-2012, 11:31 PM	#7 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3397	the weight reduction on the 2-piece is pretty nice though

10-16-2012, 07:51 AM	#9 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 29	Exactly, my cryo-treated rotor had no problem stopping my car from 147mph lap after lap at VIR. The same rotor without the cryo cracked after just one event

10-16-2012, 10:15 AM	#10 (permalink)
sig11 A True Z Fanatic Join Date: Jun 2009 Location: Detroit Posts: 1,294 Drives: 09 370Z Red Sport-MT Rep Power: 17	It does work but we don't know exactly why. :P We had a good thread about the physics of it on the 3balls forums but they're lost now... even had a fella willing to treat a few sets for A-B testing.

10-16-2012, 10:48 AM	#12 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 29	also I used to get rotors hot enough to turn blue. cryo treated ones seem to have less of that problem.

10-16-2012, 03:40 PM	#13 (permalink)
StangerGT Enthusiast Member Join Date: Jul 2012 Location: MD Posts: 294 Drives: 2003 Mustang GT Rep Power: 12	I will prolly go this route when i swap my rotors next time around. Mine seemed to hold up well last event (stock)... i think i cooked the pads a bit though.

07-03-2013, 11:50 PM	#15 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,190 Drives: 09 Nismo, 16 Nismo Rep Power: 159827	Reviving an old thread. I was researching on rotors and I found some interesting read on cryo treatment cryogenic rotors - Page 2 - Rennlist Discussion Forums cryo-treated rotors = snake oil! - NASIOC Cryogenic Rotors: Good or Snake Oil? - Pelican Parts Technical BBS I was also reading on RB rotors, they heat treated their rotors but do not use cryo treatment. Seems like results vary. Hope we have some chemists/engineer here that can chime in.