|
they went back to our fabricator to make changes to the level sensor mount. the stock level sensor on the drivers side hangs more towards the center of the opening.
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
08-03-2012, 11:14 AM
|
#11 (permalink) |
|
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,669
Drives: 370
Rep Power: 974725   |
they went back to our fabricator to make changes to the level sensor mount. the stock level sensor on the drivers side hangs more towards the center of the opening. with the canister, it has to be offset to the very outside edge. its tricky to get the location and angle just right so that it doesnt interfere with the walls of the tank or the couple little baffles in there. pictures will show what i mean... we have a gas tank cut open here so we can see inside and check fitment stuff like that. we had to make the change. our location on our original prototype wasnt quite working due to the larger diameter of the production part.
i have also been working on the installation procedure... its a little more of a hassle than i had hoped. its still on the DIY level... nothing "hard", just a frustrating thing... fitting so much into such a small opening... requires some assembly inside the tank. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fuel starvation, who else? | Mike | Track / Autocross / Drifting / Dragstrip | 556 | 12-14-2016 03:44 PM |
| Fuel Starvation Problem Solved? | ResIpsa | Track / Autocross / Drifting / Dragstrip | 7 | 03-01-2012 05:50 PM |
| Fuel Starvation. It finally happened to me. | houkouonchi | Track / Autocross / Drifting / Dragstrip | 15 | 02-29-2012 10:10 AM |
| 50-75% improved fuel economy news story... 'supercritical fuel inejctors' | travisjb | Engine & Drivetrain | 4 | 05-21-2010 11:54 AM |
| Fuel Filler Tube Coating Flaking Off Into Fuel Tank | SoCal 370Z | Nissan 370Z General Discussions | 12 | 02-02-2010 10:37 AM |
175Likes
Threaded Mode
