Good options for track wheels?

Onelownismo · 02-26-2012, 01:14 PM

What are you guys using for dedicated track wheels? I don't really want to use my stock sport wheels. I do lots of autocross and plan on doing hpde's starting this year. Any recommendations? I was thinking about stepping down to 18's

///MSH · 02-26-2012, 07:37 PM

I just bought enkei PF01'1's...18x9.5+30 (f) and 18x10.5+15 (r)
I get them tomorrow...enkei and Nissan, said they would fit, but I think it'll be close. I will advise. They were very affordable by comparison.

Red__Zed · 02-26-2012, 07:39 PM

depends on budget.

SSR type-f
Enkei RPF1
Enkei PF01
TE37
forgestar f14

corbin09 · 02-26-2012, 07:43 PM

MB Battles 18x9.5 and they are like 180 pop.

Mike · 02-26-2012, 07:48 PM

Forgestar F14, 1200 per set

Onelownismo · 02-27-2012, 06:31 AM

Thanks for the input. What sizes would you recommend? Square setup or staggered?

Mike · 02-27-2012, 08:10 AM

I run 4 18x10.5 +34 (front offsets) and use a rear 20mm spacer to keep a square setup. Running 295/40-18 Hoosiers all around. I was running 275/35-18s but the car was too low and scraped the undertray and front bumper under braking.

Onelownismo · 02-28-2012, 10:25 AM

Now my next problem is how do I transport them to the races haha

zcar_dad · 02-28-2012, 10:44 AM

Quote:

Originally Posted by Onelownismo

Now my next problem is how do I transport them to the races haha

Tow a small trailer - lots of autocross/track guys do. Try Harbor Freight for the trailer.

///MSH · 02-28-2012, 08:36 PM

One more reason to get a co-driver. Pre-requisite....you guessed it, he needs a truck and a cordless impact gun :-)

Onelownismo · 02-29-2012, 04:16 PM

Quote:

Originally Posted by zcar_dad

Tow a small trailer - lots of autocross/track guys do. Try Harbor Freight for the trailer.

How do I run a hitch?

_ace_ · 03-05-2012, 09:04 PM

Quote:

Originally Posted by Onelownismo

How do I run a hitch?

cossie1600 · 03-05-2012, 09:18 PM

Shot at 2012-01-09

Shot at 2011-08-21

jkim23 · 05-06-2013, 03:57 PM

how did they fit?

Quote:

Originally Posted by ///MSH

I just bought enkei PF01'1's...18x9.5+30 (f) and 18x10.5+15 (r)
I get them tomorrow...enkei and Nissan, said they would fit, but I think it'll be close. I will advise. They were very affordable by comparison.

GSS138 · 05-06-2013, 07:16 PM

Enkei RPF1's-little pricey but one of the lightest wheels made. I'm a noob so I am regurgitating what other people say, but there are tons of 240/350/370 guys atthe track events I go to(yay Corner 3!) . Pretty much every serious track 350/370 I see runs 18's/10.5". Most of the guys use 285 RS3's or they swap to Nittos for their time attack events.

As for transporting them, you can swap them the night before-unless they are not DOT compliant. Otherwise, you need to get a GF with an SUV

.

02-26-2012, 01:14 PM	#1 (permalink)
Onelownismo Track Member Join Date: Jul 2011 Location: Suffolk, VA Age: 38 Posts: 805 Drives: 09 PG base/sport Rep Power: 16	Good options for track wheels? What are you guys using for dedicated track wheels? I don't really want to use my stock sport wheels. I do lots of autocross and plan on doing hpde's starting this year. Any recommendations? I was thinking about stepping down to 18's

02-26-2012, 07:39 PM	#3 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 121	depends on budget. SSR type-f Enkei RPF1 Enkei PF01 TE37 forgestar f14 scruffydog and GaleForce like this. Last edited by Red__Zed; 02-26-2012 at 07:50 PM.

02-26-2012, 07:48 PM	#5 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2187	Forgestar F14, 1200 per set __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

02-27-2012, 08:10 AM	#7 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2187	I run 4 18x10.5 +34 (front offsets) and use a rear 20mm spacer to keep a square setup. Running 295/40-18 Hoosiers all around. I was running 275/35-18s but the car was too low and scraped the undertray and front bumper under braking. HitmanNK likes this. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

02-28-2012, 08:36 PM	#10 (permalink)
///MSH Base Member Join Date: Jul 2011 Location: Owasso, OK Posts: 86 Drives: '11 370Z Nismo Rep Power: 15	One more reason to get a co-driver. Pre-requisite....you guessed it, he needs a truck and a cordless impact gun :-) __________________ 2011 Nismo with...Stillen Gen3 CAI, FI LTH's, Stillen CBE with Springfielddyno rear section. Stillen under drive crank pulley, UpRev, and LW flywheel. Penske 8300DA Valved by ANZE, SPR FCA's, Stillen F/R adj. sway bars, Enkei PF01's, and Hoosier A6's

02-26-2012, 07:37 PM	#2 (permalink)
///MSH Base Member Join Date: Jul 2011 Location: Owasso, OK Posts: 86 Drives: '11 370Z Nismo Rep Power: 15	I just bought enkei PF01'1's...18x9.5+30 (f) and 18x10.5+15 (r) I get them tomorrow...enkei and Nissan, said they would fit, but I think it'll be close. I will advise. They were very affordable by comparison.

02-26-2012, 07:43 PM	#4 (permalink)
corbin09 Track Member Join Date: Jun 2009 Location: Dallas tx Posts: 665 Drives: 370z Rep Power: 281	MB Battles 18x9.5 and they are like 180 pop.

02-27-2012, 06:31 AM	#6 (permalink)
Onelownismo Track Member Join Date: Jul 2011 Location: Suffolk, VA Age: 38 Posts: 805 Drives: 09 PG base/sport Rep Power: 16	Thanks for the input. What sizes would you recommend? Square setup or staggered?

02-28-2012, 10:25 AM	#8 (permalink)
Onelownismo Track Member Join Date: Jul 2011 Location: Suffolk, VA Age: 38 Posts: 805 Drives: 09 PG base/sport Rep Power: 16	Now my next problem is how do I transport them to the races haha

03-05-2012, 09:18 PM	#13 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 31	Shot at 2012-01-09 Shot at 2011-08-21 scruffydog likes this.

05-06-2013, 07:16 PM	#15 (permalink)
GSS138 Track Member Join Date: Mar 2013 Location: Mission Viejo, CA Posts: 769 Drives: '12 370Z 6M Sport Rep Power: 14	Enkei RPF1's-little pricey but one of the lightest wheels made. I'm a noob so I am regurgitating what other people say, but there are tons of 240/350/370 guys atthe track events I go to(yay Corner 3!) . Pretty much every serious track 350/370 I see runs 18's/10.5". Most of the guys use 285 RS3's or they swap to Nittos for their time attack events. As for transporting them, you can swap them the night before-unless they are not DOT compliant. Otherwise, you need to get a GF with an SUV . LeJoendary likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First track experience today ! Some good, some really bad	travisjb	Track / Autocross / Drifting / Dragstrip	139	08-20-2011 03:14 PM
need good autocross/track tires	eastsyder	Wheels & Tires	6	07-13-2011 02:58 PM
some observations at the track (the good, bad, ugly)	cossie1600	Track / Autocross / Drifting / Dragstrip	7	05-03-2011 11:30 PM
18x8, 18x9 wheels good enough for track/drifting?	wdkwang	Wheels & Tires	3	03-27-2011 06:40 PM
Shall I Paint The Wheels? (Options Inside)	G37sHKS	Wheels & Tires	6	11-30-2010 09:43 AM