![]() |
Direct airflow is of course ideal but the cooler will radiate heat even with no airflow. The real fins all over the quality coolers give it insanely more surface area
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#10 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,669
Drives: 370
Rep Power: 974724 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Direct airflow is of course ideal but the cooler will radiate heat even with no airflow. The real fins all over the quality coolers give it insanely more surface area to ditch heat. About 70% of my core is exposed to air. While I can get it up to 220 even on the highway with good constant air, if I lay off it cools down very quickly, maybe a minute. If i get it that hot when dealing with stoplights and limited airflow it takes much longer to cool. I sometimes think about putting a nice spal fan on the backside of it to keep air moving while idling at lights or in the pits
|
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler | Dustin@Z1 | Engine & Drivetrain | 158 | 03-10-2014 02:27 PM |
Oil cooler orientation (Z1 cooler) | BrandonT | Engine & Drivetrain | 10 | 05-23-2011 08:26 AM |
STILLEN oil cooler kit + STILLEN power steering cooler = fit? | ZBW39 | STILLEN | 2 | 07-02-2010 01:08 PM |
Oil Cooler.....Trans Cooler... | kannibul | Engine & Drivetrain | 6 | 12-31-2009 06:32 PM |