official 1/4 mile track times

ssmoked · 02-04-2015, 07:58 AM

It took me about 4 visits (~25 runs) to the drag strip to achieve that time. Here is what I did:

1. Real burnout with brake fuse pulled
2. Slightly brake torque 500rpm above idle
3. Manual up shift 200 rpm before redline

Not hard to do, but you need perfect traction at the launch

FPenvy · 02-04-2015, 08:13 AM

Quote:

Originally Posted by Hammtastic

So you pulled a 1.9 while I pulled a 2.0, I trapped 1mph higher than you, but you beat me by 3 tenths at the 1/4. Weird. Congrats on the 12sec pass!

the 60' time can change a lot at the end of the track. I don't think any of my 12's have ever been achieved unless the 60' is below a 2.0

my best ET I had a 1.950 60' and trapped 111mph

Quote:

Originally Posted by ssmoked

It took me about 4 visits (~25 runs) to the drag strip to achieve that time. Here is what I did:

1. Real burnout with brake fuse pulled
2. Slightly brake torque 500rpm above idle
3. Manual up shift 200 rpm before redline

Not hard to do, but you need perfect traction at the launch

SharpByCoop · 02-05-2015, 07:47 AM

Quote:

Originally Posted by ssmoked

It took me about 4 visits (~25 runs) to the drag strip to achieve that time. Here is what I did.....

^^^ This. Perseverence, small gains, and control.

Sounds familiar to me.

Good stuff. Thanks!

Coop

F.I. Inc. · 03-12-2015, 03:46 PM

Update,

We will be at the drag strip this Saturday March 14th, to put our 7AT upgrades to the test. Current 7AT upgrades include: Excedy Clutch Packs / FI Billet aluminum Flex Plate.

In addition, we are on the quest to run 10's in the 1/4 mile. Stay tuned...

-Tony

SharpByCoop · 03-13-2015, 05:33 AM

It's a long available goal. I wish you the best!

Coop

Quote:

Originally Posted by F.I. Inc.

In addition, we are on the quest to run 10's in the 1/4 mile. Stay tuned...

-Tony

F.I. Inc. · 03-13-2015, 10:17 AM

Quote:

Originally Posted by SharpByCoop

It's a long available goal. I wish you the best!

Coop

Thank you Coop! Your ET record has stood for some time. We have prepped as good as we can and the chips will fall where they fall.

-Tony

ssmoked · 03-15-2015, 07:52 PM

Quote:

Originally Posted by F.I. Inc.

Thank you Coop! Your ET record has stood for some time. We have prepped as good as we can and the chips will fall where they fall.

-Tony

So how did the AT 370z do?

F.I. Inc. · 03-16-2015, 12:01 PM

Quote:

Originally Posted by ssmoked

So how did the AT 370z do?

Editing footage now. Posting shortly.

Thanks.
-Tony

03-12-2015, 03:46 PM	#4 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 686	Saturday is the day! Update, We will be at the drag strip this Saturday March 14th, to put our 7AT upgrades to the test. Current 7AT upgrades include: Excedy Clutch Packs / FI Billet aluminum Flex Plate. In addition, we are on the quest to run 10's in the 1/4 mile. Stay tuned... -Tony TerribleONE, gbrettin, cycy89 and 1 others like this. __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 370Z 1/4 mile Times thread (Stock, TT, Nitrous, Supercharger, Bolt ons etc)	AK370Z	Track / Autocross / Drifting / Dragstrip	618	08-16-2019 12:56 PM
Official Nürburgring TOP 200 lap times	AK370Z	Track / Autocross / Drifting / Dragstrip	30	04-08-2016 02:12 AM
Comon guys i wanna see some 1/4 mile times with SC and TT kits installed	DON_Apollo	Forced Induction	74	04-24-2011 01:36 AM
My worst track times ever (dragstrip)	Mythic	Track / Autocross / Drifting / Dragstrip	10	09-16-2010 11:49 AM
Los Angeles tracks, track dates, times???	HerZ	Track / Autocross / Drifting / Dragstrip	3	12-31-2009 01:25 AM

02-04-2015, 07:58 AM	#1 (permalink)
ssmoked Enthusiast Member Join Date: Jun 2011 Location: California Posts: 487 Drives: Charger Hellcat Rep Power: 15	It took me about 4 visits (~25 runs) to the drag strip to achieve that time. Here is what I did: 1. Real burnout with brake fuse pulled 2. Slightly brake torque 500rpm above idle 3. Manual up shift 200 rpm before redline Not hard to do, but you need perfect traction at the launch