Best RPM to Launch at for 1/4 MT?

FastJew · 10-26-2010, 09:56 PM

Quote:

Originally Posted by mspeasl

I've been a Dragracer for 50 years and from my experience with street tires on the strip is as follows. In the 'Z' bring the RPM's up to 4500 and release the clutch about half way(you will develop a feel) holding the RPM's at 4500. As the car moves forward apply more gas and more clutch until it's time to change gears. Remember for the quickest times (Lower E.T.) change gears with the power on (WOT).

This has produced the best results for me. I come from AWD cars where wheel spin is not really an option (unless highly modded). Slip the clutch and not the tires and with a little practice at a 4500rpm launch you can get 1.9 60's on street tires.

I don't recommend the speed shifting above and just have to mention that launching this way will take a toll on your clutch after repeated launches...I run at an 1/8th mile track and turn an 8.71 with a 1.96 60'. Pretty sure a new clutch is in my future after about 25 runs total over the past year.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
VDC - TCS actual launch test	Hi-Step'n370Z	Engine & Drivetrain	13	03-28-2010 04:50 PM
Smooth launch in 1st Gear?	BrianMSmith	Nissan 370Z General Discussions	22	03-26-2010 10:40 PM
7AT Launch RPM and VDC	Jason	Track / Autocross / Drifting / Dragstrip	2	09-11-2009 03:58 AM
Launch RPM	GingaBreadMan	Track / Autocross / Drifting / Dragstrip	3	08-14-2009 12:12 AM
RPM Launch?	eXo5	Track / Autocross / Drifting / Dragstrip	15	05-22-2009 11:40 AM