Autoclub Speedway Times

GSS138 · 03-07-2016, 05:22 PM

Quote:

Originally Posted by Eagle

I haven't tried other pads, once I found something I liked I kind of just stuck with it.

I hear CarboTech and StopTech pads are pretty good, but never had any experience with those on the track or street

Carbotech's are solid, they have a much different characteristic than endless does. I like them , but they wear out quick. There is a reason they are half the price of endless, they only work for half the time.. You can easily get a full season out of a set of MX-72's and probably half of the next season if you track 2 times a month. I literally ran my MX-72's down to the metal and never noticed any fall off, they lasted me over a year.

Currently running Hawk DTC's and they are WAY too much for any street tire. The RE-71 might be able to handle it(since it really is a 100 treadware tire lol), but they work almost perfect with the RC-1's so far. I don't like the characteristics of the DTC's but they stop so friggin hard that you can't really complain about them either-they get it done quickly.

I will be trying a set of Endless ME-20's next, it's their entry level racing pad and I hope it's similar to the DTC's with more feel and more linearity to it.

StopTech Rotors= awesome value no questions a buy. Stop Tech pads= just don't.

Bshields22 · 03-07-2016, 06:57 PM

Quote:

Originally Posted by GSS138

Carbotech's are solid, they have a much different characteristic than endless does. I like them , but they wear out quick. There is a reason they are half the price of endless, they only work for half the time.. You can easily get a full season out of a set of MX-72's and probably half of the next season if you track 2 times a month. I literally ran my MX-72's down to the metal and never noticed any fall off, they lasted me over a year.

Currently running Hawk DTC's and they are WAY too much for any street tire. The RE-71 might be able to handle it(since it really is a 100 treadware tire lol), but they work almost perfect with the RC-1's so far. I don't like the characteristics of the DTC's but they stop so friggin hard that you can't really complain about them either-they get it done quickly.

I will be trying a set of Endless ME-20's next, it's their entry level racing pad and I hope it's similar to the DTC's with more feel and more linearity to it.

StopTech Rotors= awesome value no questions a buy. Stop Tech pads= just don't.

So StopTech rotors are good!

Stoptech pads are bad. Why?

Also, why do you say Hawk DTC are too much for a street tire? Are those pads street/race or race only pads?

GSS138 · 03-08-2016, 12:59 AM

Stoptech rotors are best bang for buck you can find. Slotted fronts and just buy blank rears.

Hawk DTC's are a true racing pad. They will overload a street tire easily, and they will trigger abs very badly. if the tires can't handle what they do. But they are magnificent at stopping the rotors.

RN SHARK · 03-08-2016, 01:59 AM

I ran a 2:07.8 at ACS in my stock 2014 SRT Grand Cherokee, if that helps.

Bshields22 · 03-08-2016, 08:08 PM

Quote:

Originally Posted by RN SHARK

I ran a 2:07.8 at ACS in my stock 2014 SRT Grand Cherokee, if that helps.

lol I remember you! We were in the same heat. What do you post with your Z and what mods do you have?

GSS138 · 03-08-2016, 09:39 PM

Quote:

Originally Posted by Hotrodz

I'm on stock Nismo wheels and I am TT so if I go with 71R's I will probably do 285 rear and 275 up front or go 285's square. Really just need to get to the track and get some seat time and instruction but I want to make my time there count as each trip for me is at least a 5 hour drive.

Sent from my SM-N910P using Tapatalk

We seriously need some boosted 370's competing. anytime you want to go out let me know.

Hotrodz · 03-08-2016, 11:31 PM

Quote:

Originally Posted by GSS138

We seriously need some boosted 370's competing. anytime you want to go out let me know.

Right on, always open to learning and meeting other that share the passion. Thanks!

Sent from my SM-N910P using Tapatalk

Eagle · 03-09-2016, 02:05 AM

Quote:

Originally Posted by RN SHARK

I ran a 2:07.8 at ACS in my stock 2014 SRT Grand Cherokee, if that helps.

Damn! That's pretty fast in a car that big and with a passenger to boot!

RN SHARK · 03-09-2016, 08:31 AM

Quote:

Originally Posted by Bshields22

lol I remember you! We were in the same heat. What do you post with your Z and what mods do you have?

To be honest, I never broke 2:00 at ACS. 2:03 was my best. I think I lost all my time in 1 and 2 and brake zones. Mods are listed in my sig, but at that time I was still on stock tires and brake pads. Also only Whiteline front sway and Swift springs at the time. I could dive deeper in the SRT than I could in my Z, especially into 12.

RN SHARK · 03-09-2016, 08:39 AM

Quote:

Originally Posted by Eagle

Damn! That's pretty fast in a car that big and with a passenger to boot!

Thanks! That is my wife in the passenger seat and the one whose name is on the title of that SRT. Haha.
It is a big car, but it is quite fast. Especially in Track mode, 30/70 split 4WD and 475 ft/lb torque makes corner exit a big spot to gain speed on the RWD cars. And the brakes are awesome, found myself being able to dive a lot deeper than the Z into turn 12. It did lose on speed on the front stretch due to the high drag coefficient.
I ran that stock, stock Brembo brakes, Perelli PZero tires.

Bshields22 · 03-09-2016, 11:33 AM

Quote:

Originally Posted by RN SHARK

To be honest, I never broke 2:00 at ACS. 2:03 was my best. I think I lost all my time in 1 and 2 and brake zones. Mods are listed in my sig, but at that time I was still on stock tires and brake pads. Also only Whiteline front sway and Swift springs at the time. I could dive deeper in the SRT than I could in my Z, especially into 12.

Got it! thanks man!

GSS138 · 03-10-2016, 12:42 PM

As far as mods go, I have BC-BR's coils, Quaiffe LSD+4.08 FD, stillen Gen2's, oil cooler ,CSF triple pass, Berk exhaust, SPL front and rear camber arms. I have most of the basic boltons + a few extras but nothing out of the ordinary.

I dyno at about 280rWhp.

Bshields22 · 03-10-2016, 01:03 PM

Quote:

Originally Posted by GSS138

As far as mods go, I have BC-BR's coils, Quaiffe LSD+4.08 FD, stillen Gen2's, oil cooler ,CSF triple pass, Berk exhaust, SPL front and rear camber arms. I have most of the basic boltons + a few extras but nothing out of the ordinary.

I dyno at about 280rWhp.

So i saw in yuor ealier post you guy put up like 2:05? What do you post now with yours mods.

Also 285rwhp seems low for all your mods. I have CBE, CAI and a tune and pull 308.

GSS138 · 03-10-2016, 03:44 PM

Pretty much running back to back 1.58's and 1.59's no problem. I did put in a few 1.57's though. PBT is 1.57.6. I am sure I can touch a 1.55.x after reviewing my videos though. I still have some problems with the "playground" area. And even on my PBT the braking into 3 was not good, and could definitely carry more speed through the chicane and into the hairpin.

Granted I haven't changed anything on my car since last summer besides tires and brakes, I was doing 2:03's on a wet day in August 2015 and my tires were dead.

Bshields22 · 01-19-2017, 07:31 PM

Hey guys,

Not sure if you're still on this thread but I'm hitting up autoclub this weekend. Hope to see some 370's on Saturday

03-08-2016, 12:59 AM	#33 (permalink)
GSS138 Track Member Join Date: Mar 2013 Location: Mission Viejo, CA Posts: 769 Drives: '12 370Z 6M Sport Rep Power: 14	Stoptech rotors are best bang for buck you can find. Slotted fronts and just buy blank rears. Hawk DTC's are a true racing pad. They will overload a street tire easily, and they will trigger abs very badly. if the tires can't handle what they do. But they are magnificent at stopping the rotors. RN SHARK likes this. __________________ Current Mods: Vorpal Weapon +5.

03-08-2016, 01:59 AM	#34 (permalink)
RN SHARK Track Member Join Date: Jun 2011 Location: Delafield, WI Age: 45 Posts: 618 Drives: 09 370Z, 14 SRT GC Rep Power: 36	I ran a 2:07.8 at ACS in my stock 2014 SRT Grand Cherokee, if that helps. Eagle, Rusty, GSS138 and 1 others like this. __________________ ___________ '09 6sp/Z1/PowerTrix/SPL/Swift/SRP/Whiteline/F.I.LTH&CBE/UpRev by Seb/CJM/Stillen/Ings+1/RJM/TrackSpec/Sparco/Motul/Wavetrac/Coolerworx/Verus/CraftSquare '14 SRT Grand Cherokee; '08 TL Type-S

03-10-2016, 12:42 PM	#42 (permalink)
GSS138 Track Member Join Date: Mar 2013 Location: Mission Viejo, CA Posts: 769 Drives: '12 370Z 6M Sport Rep Power: 14	As far as mods go, I have BC-BR's coils, Quaiffe LSD+4.08 FD, stillen Gen2's, oil cooler ,CSF triple pass, Berk exhaust, SPL front and rear camber arms. I have most of the basic boltons + a few extras but nothing out of the ordinary. I dyno at about 280rWhp. __________________ Current Mods: Vorpal Weapon +5.

03-10-2016, 03:44 PM	#44 (permalink)
GSS138 Track Member Join Date: Mar 2013 Location: Mission Viejo, CA Posts: 769 Drives: '12 370Z 6M Sport Rep Power: 14	Pretty much running back to back 1.58's and 1.59's no problem. I did put in a few 1.57's though. PBT is 1.57.6. I am sure I can touch a 1.55.x after reviewing my videos though. I still have some problems with the "playground" area. And even on my PBT the braking into 3 was not good, and could definitely carry more speed through the chicane and into the hairpin. Granted I haven't changed anything on my car since last summer besides tires and brakes, I was doing 2:03's on a wet day in August 2015 and my tires were dead. Hotrodz likes this. __________________ Current Mods: Vorpal Weapon +5. Last edited by GSS138; 03-10-2016 at 03:48 PM.

01-19-2017, 07:31 PM	#45 (permalink)
Bshields22 Enthusiast Member Join Date: Nov 2012 Location: Anaheim, CA Posts: 422 Drives: 2012 Black 370Z-R Rep Power: 698	Hey guys, Not sure if you're still on this thread but I'm hitting up autoclub this weekend. Hope to see some 370's on Saturday Eagle likes this. __________________ 308 rwhp \| 252 rwtq \| Fast Intentions CBE 18" Res \| Stillen Gen 3 CAI \| EcuTek Tune \| Stoptech Slotted Rotors and Sport Pads \| KW V3 Coilovers \| SPL Upper Control Arms & Lower Rear Arms \| Seibon CF TS Hood \| Vossen CVT \| SPC Toe bolts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Autoclub speedway in car, 9/8/13	clintfocus	Track / Autocross / Drifting / Dragstrip	8	09-16-2013 05:11 PM
Autoclub Speedway 370Z vs F430	martin82	Track / Autocross / Drifting / Dragstrip	15	09-12-2013 05:38 PM
Autoclub Speedway Speed Ventures Roval	matcop	Track / Autocross / Drifting / Dragstrip	0	07-02-2013 01:09 AM
Autoclub speedway street legal drag May 1st 2010	tru_Asiatik	Southern California Region	68	05-05-2010 01:11 PM
autoclub speedway 1/17	boosted180	Track / Autocross / Drifting / Dragstrip	3	01-12-2010 02:28 PM